Combining a carbon body with a titanium axle, each of these cleat-ready pedals provide a sturdy base for heavy-duty, varied terrain riding. Built to resist impact from rocks and dirt thrown up from the trail floor, these lightweight and smooth-spinning platforms have a specially designed shape and build to ensure the best power-to-weight ratio possible. Suited to the rigours of XC racing, this is the perfect pair for fast-paced and thrilling riding.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptionally, modern and performance orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand this pedal design usage further, it has fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride.
While timing chips are possibly the greatest invention to event management, you really don't want to be using someone else's sweat ridden timing chip strap band.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Max Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Maximum Protection RapidRacerProducts offers the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer - 21mm longer - than some available offerings as this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the Proguard Max Mudguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Standard Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer to improve the protection of the face and eyes when riding at high speed. The turndown at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the RapidRacerProducts Proguard Standard Mudguard as a means of offering greater protection for your seals from high-velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
The LifeLine Pro Crown Race Setting Tool is very simple to use. Instructions: Slide your crown race down your steerer tube. Apply a small amount of anti seize to the undersid of the crown race. Select the appropriate sized insert and place it on the crown race. Use a hammer and tap the end cap on the tube to seat the race into its proper place.
This version is tubeless ready, allowing you to mount the tyre with a tube or tubeless setup. This tyre performs even faster and has greater grip when running tubeless due to lower pressures being possible. Tubeless Ready Tubeless tyres provide many benefits: they offer the ability to run lower air pressures, which dramatically improves traction; it provides a lower rolling resistance compared to when using tubes and a drastic reduction in the change of getting a flat tyre since there is no tube. MAXX SPEED A significant advantage when used in cross country and enduro tyres, the two outer layers of the compound are designed primarily to reduce rolling resistance and optimize treadwear, grip and traction. EXO Protection Maxxis EXO tyres feature an exceptional cut-resistant and abrasion-resistant material added to the tyre sidewalls. This densely woven fabric is very lightweight and is very flexible, which guarantees that the performance of the tyre is unaffected. The EXO Protection is a superb choice for rocky, aggressive and technical trails where the chance of sidewall cuts is high.
Panaracer's exclusive Multi-Step knobs have various heights designed into each knob These stepped knobs help tyres to perform in all conditions from hard to soft. Short big knobs are specially designed to provide an excellent ride that also delivers the lightest weight full knobby MTB tyres. The new ZSG Natural formula integrates more natural rubber into the compound. This compound has the same low rolling resistance as the premium compound and it has enhanced wear resistance making it perfect for a long wearing training tyre.
The protection offered against penetration and pinch flats is 300% better than standard tyres. Panaracer's new Mile Cruncher rubber compound ensures long life durability, fantastic grip and great ride comfort. The All Contact tread shape optimises tyre performance by minimising rolling resistance and maximising cornering contact with the road.
Awesome power (wet and dry) and in precise modulation on carbon rims. No squeaking and very little wear to rim. Ideal for Carbon Rims.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Prime Time Inspired by cyclists sprinting for ‘primes’ (pronounced ‘preems’) in criterium races, LifeLine prime race tyres are designed for high speeds, tight bends and the pursuit of victory. The slick centre tread keeps straight line rolling resistance to an absolute minimum while a channeled pattern in the shoulders provides increased grip in the corners and helps to shift surface water in poor conditions. The 60a durometer compound offers excellent traction for confidence on twisty descents and hairpin turns. Case Closed The 120TPI (threads per inch) casing provides increased strength and flexibility while reducing weight. This allows the tyre to withstand the high pressures needed for racing, and the reduced rotational mass offers faster acceleration and agile handling. A tough and lightweight Kevlar breaker sits beneath the tread to guard against sharp road debris, helping prevent punctures and keeping you out on the roads for longer. The aramid folding beads provide a secure interface with the rim whilst also allowing easy installation. 23mm or 25mm? LifeLine Prime Race Road Tyres are available in 23mm and 25mm options so you can choose between the feedback and precision of 23s, or the more cushioned and stable feel of 25s. Custom colours are also available to match with your kit theme.