These quick link pliers make fast work of pesky or stubborn chain master links.The laser cut, heat-treated jaws feature a dual-function design allowing both installation and removal of master links,Cushioned grips give comfort and control..
The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic 'quick-change' handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use and is fully rebuildable. Includes the following magnetic 1/4' bits: 2mm 2.5mm 3mm 4mm 5mm & 6mm hex T25 Torx®-compatible #2 Philips cross tip Bit holder includes empty spaces for 2 extra bits
The Park Tool QTH-1 Quick Change Bit Driver Set is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on the majority of bikes.Ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bikesThe magnetic quick-change handle allows for one-handed operation and makes changing bits quick and easyThe bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board and also includes empty spaces for 2 extra bitsIncludes the following magnetic 1/4" bits - 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex, T25 Torx compatible and #2 Philips cross tipThe QTH-1 is a professional-grade tool built to withstand the rigours of daily shop use, and is fully rebuildableThe magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use, and is fully rebuildable.
Whether you're in the market for replacing or upgrading one of our Hydraulics™ Reservoir hoses, our Quick Connect Kit is everything you need to take performance and functionality onto the next level. (Suitable for both Hydraulics™ and Hydraulics™ LT Reservoirs)Key Features:Compatible with Hydraulics™ Reservoir,Compatible with Hydraulics™ LT Reservoir.
Bike bags with Quick Release System for rapid attachment and removal; allows for direct attachment of bags with QL1/2.1/3/3.1. QL3/3.1 attachment elements can be removed; bags with a hook system such as Quick-Lock2.1 can be easily hooked in. It is suitable for 26/28" and 29" limited compatibility; horizontal and vertical struts with 10 mm tube diameter. Includes mounting kit & no further attachments necessary.Maximum load: 15 kg.,Material: Aluminium,Max Load: 15kg,Weight: 440g.
The Handlebar Mounting-Set QR gives you ONE single Mounting-Set to use flexibly on several bikes and is compatible with all of our handlebar bags. Mounting and removal takes no time at all needs no tools or screws yet still withstands the conditions over bumpy and rough terrain. FURTHER PRACTICAL FEATURES / WEITERE PRAKTISCHE DETAILS + For handlebars with a diameter of up to 35 mm + Reflective tape on the front + Not suitable for carbon frames More Information COLOR black MATERIAL polyamide ADAPTER - INSTRUCTIONS Download DATASHEET Download WEIGHT 150 g | 5.3 oz. PROPERTIES mig
Transform your bike in no time at all from a lightweight bike for sporty tours into a transport bike for shopping and commuting – this way you stay completely flexible. Fifteen seconds is all it takes to mount the practical luggage rack and only five seconds to remove it again. The struts with a diameter of 10 mm support a payload of up to 20 kilograms. The Quick Rack is of course suitable for use with all of our fixation systems so that you can combine it with any ORTLIEB bag. Thanks to the two hanging levels and a platform you can also use and fasten panniers and a basket at the same time. The optional mudguards make sure that you keep dry and clean in bad weather too. FURTHER PRACTICAL FEATURES + Suitable for 26” and 28” (limited suitability for 29” wheels – up to max. 2.3” tire width) + Assembly set included + Can be combined with one of three mudguards (depending on tire width) COLOR black MATERIAL aluminium BAG TYPE single ADAPTER - INSTRUCTIONS Download DATASHEET Download WEIGHT 580 g | 20.5 oz LOAD 15 kg | 33.1 lbs PROPERTIES mig ql1 ql21 ql31
Riders who like a clean look and pay attention to every gram on their bike will love the Quick Rack Light. Weighing in at only 440 grams it’s lighter than its big brother the Quick Rack. Yet when it comes to functionality it is every bit an equal. With two stable side struts it is suitable for all ORTLIEB panniers making it extremely flexible. In no time at all your minimalist and lightweight bike becomes a practical helper for everyday activities like shopping or commuting. In just 15 seconds you can assemble the Quick Rack Light and then remove it again in a mere 5 seconds. The struts with a 10 mm diameter carry up to 20 kg of luggage. FURTHER PRACTICAL FEATURES + Suitable for 26” and 28” (limited suitability for 29” wheels – up to max. 2.3” tire width) + Assembly set included + Can be combined with one of three mudguards (depending on tire width) COLOR black MATERIAL aluminium BAG TYPE single ADAPTER - INSTRUCTIONS Download DATASHEET Download WEIGHT 440 g | 15.5 oz LOAD 20 kg | 44.1 lbs PROPERTIES mig ql1 ql21 ql31
The minimalist mudguard is not only a perfect stylistic match for the Quick Rack and Quick Rack Light but also adds functionality by protecting your bike your bags and you from wheel spray and dirt. This makes sure you can ride in adverse weather conditions as well so that your bike becomes even more flexible. Three versions ensure an ideal fit for different tire widths. PLEASE NOTE: + F78107 Road (38mm) is suitable for tires up to max. 32mm / 26-28“ + F78108 Gravel (50mm) is suitable for tires up to max. 45mm / 26-28“ + F78109 MTB (72mm) is suitable for tires of up to max. 2.3“ / 26-29“ COLOR black BAG TYPE single ADAPTER - SIZE 1.5 inch INSTRUCTIONS Download DATASHEET Download
Are you looking to mount one of our Quick Racks but find that your bike has no M5 or M6 threaded eyelets? That’s no problem at all: with the Quick Rack Seat Stay Adapter our innovative luggage rack can also be firmly and securely mounted to the seat stays of your bike. PLEASE NOTE: Not suitable for carbon frames! More Information COLOR black ADAPTER - INSTRUCTIONS Download DATASHEET Download PROPERTIES mig
This rear thru-axle is equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame. The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it. Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm
This front thru-axle features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks. The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it. All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle. Please note: Not compatible with 2021 Fox 36mm / 38mm forks. Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof’s technical information.