Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Anodised Bling KitThis bling kit is designed to elevate your ride's aesthetic by offering a range of colours that match your taste. It features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility:1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Features: Material: 6061-T6 AluminiumMade in the USAKit Inlcudes: 3mm, 5mm, 10mm, & 15mm headset spacers Ultralight stem cap with an integrated 5mm spacer 4 matching Aluminium water bottle cage bolts A black Aluminium stem cap boltPart Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI Weight: Stem Cap: 12g; Spacers: 3mm: 2g, 5mm: 3g, 10mm: 5g, 15mm: 7g; 4 Cage Bolts: 4gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Ultralight Stem Cap and BoltWhen you’re finishing off your custom bike build or customising your existing bike, small details can make a big difference. This is why Wolf Tooth has produced this lightweight 7075-T6 Aluminium Stem Cap and Bolt, which will enhance the looks of your stem and provide the durability you need for hitting the trails hard.Features: Material: Top Cap: Precision Machined from 7075-T6 Aluminium; Bolt: Alloy Steerer Tube Compatibility: Straight 1.1/8" or 1.1/8" to 1.1/2" tapered only Includes: Black Alloy bolt Torque Spec: 2-3 Nm tightening torque with light grease on threads only Made in the USA Weight: 8g (cap and bolt)Manufacturer's Part Numbers:Black: WTSTEMCAPBLK1; Blue: WTSTEMCAPBLU1; Gold: WTSTEMCAPGLD1; Green: WTSTEMCAPGRN1; Orange: WTSTEMCAPORG1; Pink: WTSTEMCAPPNK1; Purple: WTSTEMCAPPRP1; Red: WTSTEMCAPRED1; Silver: WTSTEMCAPSIL1; Teal: WTSTEMCAPTEAL1; Nickel: WTSTEMCAPNI1Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Bolts for M8 Threaded Chain RingEngineered to top-level standards, these high-quality bolts are machined from 7075 T6 aluminium at Wolf Tooth's headquarters in Minneapolis, USA. Suitable for M8 threaded 1x chainrings, these feature a hard-wearing design that's ideal for riders who want to adorn their ride with precision engineered components down to the finest details. Genuine Wolf Tooth spare parts. Features: Material: 7075 T6 Aluminium Use: MTB Compatibility: M8 threaded chainring Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 5)With their tough aluminium construction, this pack of aluminium chainring bolts and nuts is a great upgrade to replace your old or lost parts and to breathe new life back into your setup. They're are suitable for use on Wolf Tooth bolt-on Drop-Stop chainrings with through holes. Plus, they can also be used with non-Wolf Tooth branded single chainrings and those with a 110mm or 130mm bolt circle diameter (BCD).Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.Features:Material: 7075-T6 AluminiumSize: M8 x.75 x 5Torque Spec: 7-8 NM tightening torque with light grease on threads onlyCompatibility: Wolf Tooth bolt-on Drop-Stop chainrings with through holes, works with other brand's single chainrings as wellBolt Circle Diameter (BCD) Compatibility: 110mm or 130mmMade in the USAPart Numbers: Black: WT5CBCN06BLK; Blue: WT5CBCN06BLU; Gold: WT5CBCN06GLD; Green: WT5CBCN06GRN; Grey: WT5CBCN06GRY; Orange: WT5CBCN06ORG; Purple: WT5CBCN06PRP; Red: WT5CBCN06RED; Silver: WT5CBCN06SILWeight: 10gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Light Action Ltd Edition Dropper LeverFeaturing a longer lever arm than the standard ReMote version, this remote dropper lever reduces the actuation force required by a third and makes it ideal for dropper posts with a harder pull or if you prefer a light actuation feel. These limited edition anodised colourways add extra flair to your ride.Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Finish: Limited edition anodised Dropper Post Compatibility: All-cable actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Compatibility: Compatible with all cable-actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.Manufacturer's Part Numbers: WTREMOTELACLMPBLU Blue 22.2mm WTREMOTELACLMPGLD Gold 22.2mm WTREMOTELACLMPORG Orange Size 22.2mm WTREMOTELACLMPPRP Purple Size 22.2mm WTREMOTELACLMPRED Red Size 22.2mm WTREMOTELACLMPNI Silver Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Karv GripsGreat for longer rides, these superb grips are slightly thinner than Wolf Tooth's Fat Paw grips at 6.5mm thick. This makes them ideal for riders who enjoy going the extra distance across the forest as they reduce hand fatigue and finger numbness. Coming equipped with a dual-density silicone compound, these also provide you with fantastic vibration damping and conform to your hand for improved comfort while maintaining durability. Features: Material: 100% Silicone Use: MTB Diameter: 32mm Thickness: 6.5mm Length: 135mm Includes: Bar end plugs Weight: 75g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.