Certified to EN 1621-3 (chest) and EN 1621-2 (back), Level 1, the VPD System Tanktop is a highly capable protection system that also boasts incredible flexibility for comfort and easy movement when you're sending it down technical trails. Rather than encompass the protector into a jacket or vest, POC keeps it simple to enhance freedom of movement and airflow. The VPD material softens as it's warmed by your body heat, providing incredible flexibility but in the event that you take an impact it hardens to absorb the energy of the crash. Large ventilation channels front and rear let sweat escape and fresh air in, keeping your core temperature regulated. Flexible, lightweight chest and back protection for every trail ride. VPD Protection POC's VPD (Visco-Elastic Polymer Dough) has a decade of knowledge and progression behind it and when you're pushing hard on your bike then it's almost inevitable you'll fall. VDP lets you get up, again and again, no matter how many times gravity gets the better of you. Allowing complete freedom of movement, VPD is flexible protection with a shock absorbing inner layer matched to an abrasion resistant outer.
Combining minimal padding with unrivalled flexibility, the POC VPD Air + Tee combines protection and comfort for an offroad creation destined for greatness. Allowing for freedom of movement in the chest and elbow regions, the flexible mesh is extremely lightweight and highly breathable to ensure you stay cool from the first pedal until the last. The back protector is ventilated to reduce the build-up of sweat and sports impressive shock absorption levels to ensure an unexpected fall doesn’t do damage. Fitting perfectly to your upper body thanks to the elastic mesh, the VPD Air+ Tee has low-profile sleeve and chest comfort pads. For those searching for a customisable fit, the optional waist strap allows you to personalise your comfort easily. With comfort, compression and ventilation all working hand-in-hand to provide one of the finest forms of protection the trail has seen, even the roughest riding conditions don’t stand a chance of ruining your session.
Laughing in the face of rough terrain, rocks and other trail-related threats that pose a danger to your ride, the Spine VPD 2.0 Jacket offers extensive coverage and protection to your back, chest, shoulders and elbows. Providing the perfect fit thanks to the 3D moulded protectors, the reinforced stretch fabric keeps your elbows shielded and the innovative Crash Retention Strap works to prevent your protection from sliding out of place. The asymmetric zipper welcomes optimised chest protection and the perforated protectors can be easily removed and washed to keep you feeling fresh. Highly stylish, this protective jacket outperforms the highest level of the 1621-2 motorcycle standards and makes the difference when shredding aggressively to kick up roost.
POC Spine VPD 2.0 Protection JacketThis jacket offers protection for your chest, shoulders and elbows. All pieces are made out of POC VPD 2.The stretch mesh fabric and the perforated protectors make the jacket well ventilated. Also available in the DH version with the crash retention strap (CRS) and low friction hard shell elbow caps, that enables removable for washing.Features:3D moulded VPD 2.0 back protector, shoulder and elbow padsElbow pads are covered with a reinforced stretch fabric3-ply conformable VPD 2.0 chest protectorAsymmetric zipper for optimal chest protectionCrash retention strap (CRS) prevents the elbow protector from sliding out of placeCERTIFIED EN 1621-2 Level 2 (Back), EN 1621-1 (Elbow & Shoulder)Waistband not includedBuy POC Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Spine VPD 2.0 Protection JacketThis jacket offers protection for your chest, shoulders and elbows. All pieces are made out of POC VPD 2.The stretch mesh fabric and the perforated protectors make the jacket well ventilated. Also available in the DH version with the crash retention strap (CRS) and low friction hard shell elbow caps, that enables removable for washing.Features:3D moulded VPD 2.0 back protector, shoulder and elbow padsElbow pads are covered with a reinforced stretch fabric3-ply conformable VPD 2.0 chest protectorAsymmetric zipper for optimal chest protectionCrash retention strap (CRS) prevents the elbow protector from sliding out of placeCERTIFIED EN 1621-2 Level 2 (Back), EN 1621-1 (Elbow & Shoulder)Waistband not includedBuy POC Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Spine VPD 2.0 Protection JacketThis jacket offers protection for your chest, shoulders and elbows. All pieces are made out of POC VPD 2.The stretch mesh fabric and the perforated protectors make the jacket well ventilated. Also available in the DH version with the crash retention strap (CRS) and low friction hard shell elbow caps, that enables removable for washing.Features:3D moulded VPD 2.0 back protector, shoulder and elbow padsElbow pads are covered with a reinforced stretch fabric3-ply conformable VPD 2.0 chest protectorAsymmetric zipper for optimal chest protectionCrash retention strap (CRS) prevents the elbow protector from sliding out of placeCERTIFIED EN 1621-2 Level 2 (Back), EN 1621-1 (Elbow & Shoulder)Waistband not includedBuy POC Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring a lightweight and ventilated 3 layer back protector which conforms to Level 1 (1621-2) standards, the Air+ Tee utilizes a flexible mesh, which is both light and highly breathable, in combination with the low profile back protector.Key Features:Light, three quarter, 3ply back protector with superb shock absorption.,Mesh back for good ventilation.,Certified EN 1621-2 3ply sheet back plate.,Elastic mesh for optimal fit, with an optional adjustablewaist strap providing further fit personalization.,Incorporates low profile sleeve and chest comfort pads.,Reinforced fabric on elbow, and a silicon strip at the bottom of elbow to secure in place.,Perforated for optimized moisture and ventilation control..
The VPD System Chest forms part of our modular protection for allyear, multisport use.When combined with the VPD System Back, this protector provides MTB specific protection that inspires confidence on the trails. With unparalleled freedom of movement thanks to a clever design that means the protection does not require a vest or jacket, the VPD System Chest delivers exceptional versatility and lightweight protection certified to European standard EN16213, level 1. The lightweight, minimalist design also provides reliable ventilation. Constructed from VPD, the protective material is soft warms to and shapes with the body for a personalized fit, yet hardens on impact for reliable protection.In order to function, this chest module must be combined with the VPD System Back to create the VPD System Torso. Key Features: In order to function, this chest module must be combined with the VPD System Back to create the VPD System Torso,3D Molded Chest protector certified to EN 1621-3, Level 1 standards,Minimalist design and construction,VPD material delivers incredible flexibility and protection,Fully adjustable to find the perfect individual fit..
The VPD Air Back has been developed from the very start to give the ultimate in adjustability for a truly personalised fit.Personalised fit: The back protector features an entirely new fit system that gives a highly personalized, secure and comfortable fit. You can choose where the chest strap sits across the sternum, so that the back protector always sits in the best position for you. The waist band is height adjustable, making it easy to ensure the back protector always sits comfortably and securely.Meets protection standards: The VPD Air Back meets the European CE EN 1621-2, Level 1 safety standards for back protectors, giving you certified protection. For extra comfort, the protector is encased in a 3D mesh material that works to improve ventilation and moisture wicking, so you can stay dry and comfortable for a whole day on the mountain. Key Features: Lightweight, highly ventilated back protector,Meets CE EN 1621-2, Level 1 European standard for back protectors,Highly adjustable shoulder and sternum straps,Height adjustable and removable waist band,3D mesh encasing material gives comfort and dryness next to the skin,. Specification: Composition: Main: 90% Polyester 10% Polyurethane, Back: 100% Polyester .
Designed to stay with your child as they grow, the pads will fit over elbows if they no longer fit over the knees.Featuring our patented VPD Air material for protection, the exceptionally lightweight and well-ventilated protector has a barely-there feel that ensures your child won’t get too hot or uncomfortable while out riding trails. The material moves with easily with the body for ultimate freedom of movement.The protector is encased in a soft stretch fabric to ensure the pads are comfortable against the skin, and reinforced material on the outer won’t tear even after years of repeated falls. Antislip neoprene patches help keep the protectors in place, and Velcro fastenings can be effortlessly operated by children, so it’s always easy to get the children’s body armor on and off.For knee use, measure circumference 10cm above the knee:S/14-20cmM/16-24cmL/20-34cmFor elbow use measure biceps circumference.
Key Features:Cuttable neoprene construction with large Velcro closureTough woven PU outer gives added protection to ensure a long service life
Features:With neoprene construction and a tough woven outer skin this is the ideal solution to protect your dropper seatpost,By keeping mud, dust, debris and stones away from the upper stantion of your post you can drastically decrease servicing costs and frequency,Easily and securely mounts to your saddle rails and post,Quick and simple to wash and very light.