These tubeless valves are universal and have also been designed to work with tubeless tyre inserts. These durably-made valves are ideal for efficient inflation. The adapted head allows the tyre insert to sit on top of the valve, with the shape of the head allowing for easy inflation and deflation. Each valve has a removable core allowing you to get maximum air flow from your tubeless pump or CO2 cartridge. The custom cap has been specially designed and has an integrated core remover for removing and tightening the core without any additional tools. The nut has also been designed so that you can get a good grip on the flat edges to firmly tighten the valve on the rim. An O-ring is included and sits against the outside of the rim to prevent damage to the rim. How to InstallRemove valve cap and nut, insert valve through rim, fit o-ring to valve then thread nut on and tighten by hand. Key Features: Valve Type: Presta,Includes: Integrated valve core remover cap, O-ring, removable core,Easy installation,Sold as a pair,Weight: 12g per pair.
Completely redesigned from the ground up, the Nukeproof Horizon V2 Rear Wheel 102t delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series.This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better.Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in.A full range of spares are available to service your hub in the future.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:Rear 27.5" Wheel: Non-Drive Side: 271, Driveside: 268 Rear 29" Wheel: Non-Drive Side: 289, Driveside: 286 Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail / All Mountain / Enduro / DH,Rim Width: Inner: 30mm; External: 35mm; Rim Height: 21.6mm,Spacing Options: 142x12mm; 148x12mm; 150/157x12mm,Conversion options: 142x12mm can be converted to 135mm QR, 148x12mm can be converted to 141mm Boost with end caps (sold separately),Rear hub engagement: 102 points of engagement (every 3.52 degrees),Freehub options: Shimano HG, Shimano Microspline, SRAM XD,Spoke Type: J-Bend; Spoke count: 32; Lacing pattern: 3x,Disc Mount: 6-Bolt,Tubeless Ready: Yes - Pre-taped and valve supplied;,Build: Handbuilt .
Completely redesigned from the ground up, the Nukeproof Horizon V2 Front Wheel delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders.It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight.Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate.LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side.This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:27.5" Front Wheel: Non-Drive Side: 269, Driveside: 27029" Front Wheel: Non-Drive Side: 288, Driveside: 289 Conversion kits and replacement end caps available separately Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail, All Mountain, Enduro and DH,Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost,Rim Width: Inner Width: 30mm; External Width: 35mm,Rim Height: 21.6mm,Tubeless Ready: Yes - Pretaped and valve supplied,Spoke Count: 32; Spoke Type: J-Bend; Lacing Pattern: 3x,Disc Mount: 6-Bolt,Build: Handbuilt,Weight: 27.5" 15mm Boost: 884g; 27.5" 20mm Boost: 946g.
Completely redesigned from the ground up, the Nukeproof Horizon V2 Front Wheel delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders.It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight.Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate.LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side.This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:27.5" Front Wheel: Non-Drive Side: 269, Driveside: 27029" Front Wheel: Non-Drive Side: 288, Driveside: 289 Conversion kits and replacement end caps available separately Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail, All Mountain, Enduro and DH,Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost,Rim Width: Inner Width: 30mm; External Width: 35mm,Rim Height: 21.6mm,Tubeless Ready: Yes - Pretaped and valve supplied,Spoke Count: 32; Spoke Type: J-Bend; Lacing Pattern: 3x,Disc Mount: 6-Bolt,Build: Handbuilt,Weight: 27.5" 15mm Boost: 884g; 27.5" 20mm Boost: 946g.
Updated version of Aaron Ross signature bars from Odyssey. The Boss bar are made from multi-butted 41-thermal 4130 chromoly and feature a high 9.25" rise. ###section### Product Specs Rise: 9.25" Width: 29" Up Sweep: 2° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
Odyssey's 49er is a traditional looking 4-piece bar that uses multi-butted main tubing, traditional 7/8" crossbar for strength, larger radius bends for greater durability, welded end caps to reduce flex. ###section### Product Specs Rise: 9" Width: 29" Up Sweep: 1.5° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 4pc Weight: TBC ###section### ###shogun-image-section###
Description for Odyssey Uppercut Bars Rust Proof Black / 9" Rise not available
Inspired by the V1 this evolution of Odyssey's splined 3-pc crankset comes with an improvement in strength and overall design. Although they do not feature the 41-Thermal® Lifetime Warranty, the Calibur V2 are manufactured using the same standards, materials, and production quality used under the same roof as the Thunderbolt+ Cranks. Featuring post-weld heat-treated 4130 chromoly arms, a hollow 22mm 48 spline chromoly spindle and includes a sealed bottom bracket. ###section### Product Specs Type: 3 Piece Spindle Diameter: 22mm Includes BB Bearings: Yes Weight: TBC
These are the Thunderbolt cranks from Odyssey - the descendant of the original Twombolts. The cranks still feature the 2-piece design with a cluster which attaches the other arm. The Thunderbolt cranks also feature an updated mating arm lug for increased durability and improved fit on the ultra-hollow 22mm spindle. The cranks also feature an open ended spindle cap. Arms and 175mm spindle weigh 1.76lbs. ###section### Product Specs Type: 2pc Spindle Diameter: 22mm Drive Side: Right Side Drive Includes BB Bearings: No Weight: 799g / 28.16oz ###shogun-image-section###
These are the Thunderbolt cranks from Odyssey - the descendant of the original Twombolts. The cranks still feature the 2-piece design with a cluster which attaches the other arm. The Thunderbolt cranks also feature an updated mating arm lug for increased durability and improved fit on the ultra-hollow 22mm spindle. The cranks also feature an open ended spindle cap. Arms and 175mm spindle weigh 1.76lbs. ###section### Product Specs Type: 2pc Spindle Diameter: 22mm Drive Side: Left Side Drive Includes BB Bearings: No Weight: 799g / 28.16oz ###shogun-image-section###
One of Odyssey's strongest set of cranks are back! Utilising a hollow chromoly 22mm spindle to save weight, and 4130 Chromoly Arms for strength you will be ready to shred in no time at all! Inspired by the V1 introduced in March 2017, this evolution of Odyssey's splined 3-pc crankset comes with an improvement in strength and overall design. ###section### Product Specs Type: 3pc Spindle Diameter: 22mm Drive Side: Left & Right Compatible Includes BB Bearings: No Weight: ###shogun-image-section###
The Odyssey R32 fork is made from Odysseys 41-thermal processed 4130 chromoly. These forks features a built in bearing race, 4mm dropouts shaped for grind and peg clearance and a seamless, tapered, butted and specially formed leg tube for improved grind and guard clearance. These forks have a traditional offset of 32mm but are also available in a 25mm versions - see the Odyssey R25 forks for details. These forks are laboratory tested and are covered under Odysseys 41thermal lifetime warranty. ###section### Product Specs Steerer Length: 180mm Wheel Size: 24" Material: Chromoly Dropout Size: 3/8" Offset: 32mm Weight: TBC