The Flip bracket offers our new generation fit range paired to the classic Profile Design spring loaded arms allowing the armrests to sit up, out of the way when not in use.Pairing this bracket with the ergo armrest offers industry leading fit options and greater comfort,With the 50a extensions this aerobar encourages a neutral wrist angle and is designed to be super comfortable,The Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing,There are 80 distinct position options achievable just by moving the armrests,Fit information: Armrest Offset -85mm to -17.5mm in 7.5mm steps, Armrest Width 112mm to 280mm in 18.5mm steps, Armrest Stack 40mm,Weight: 587g.
Profile Racing’s Titaniun 14mm GDH CASSETTE HUB AXLE answers the call for strength and weight. It’s CNC precision machined and lighter than standard steel axles by almost half yet it’s just as strong.
Replacement axles exclusively for Profile Z Coaster® hubs. Hardware shown on axles (jam nuts & cone spacer) included.
Profile 14mm Titanium Rear Hub Axle. This is a conversion kit for Mini, Totem, and Madera V2 Cassette from the 3/8" 3 piece axle to the 14mm Gun Drilled Hollow axle. It will also work with the High Flange hubs. It will not work with the Elite BMX hub. It contains a GDH CrMo axle, non-drive cone spacer, and locknuts.
Key Features: Facing improves the alignment of bearings in the headset, The 690-XL has an approximate diameter of 58mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsets,Must be used with the 768 pilot to ensure the frame is reamed and faced accurately.
Assos rS.sturmPrinz EVO JacketAssos' rS.sturmPrinz EVO windproof jacket is the ultimate, racing-cut rain and wind protection jacket. If you ride a lot, all year round, and aren't concerned if it rains, then the sturmPrinz is for you. The ultimate foul weather protection.With the rs.sturmPrinz EVO Windproof jacket the objective was to create the ideal rain and wind protective jacket for high performance cycling, no holds barred and no corners cut by the accountants! However, Assos' aim was not to make a 100% waterproof jacket. Why not? Because 100% waterproof also means 100% impermeable - sweat builds up and can't escape. Not what you want. The evaporation process must be proactive, it mustn't be slowed excessively by your protective shell - which ultimately leads to cold and chills. To this end the rs.sturmPrinz EVO protects but also breathes incredibly well maintaining body temperature and comfort.Assos have calibrated and optimised the balance between insulation and protection, without jeopardising your performance, giving you a functional, intelligently engineered, cycling-specific anti- rain device that works! This has been acheived through the use of exclusive TRITON fabric, specifically engineered by Assos for the rs.sturmPrinz jacket. The sturmPrinz use two versions of TRITON. The front panel features TRITON V1, a robust fabric engineered to be more resistant, and the back panel uses the lighter, more breathable TRITON V2.Ergonomically shaped to fit your body in the cycling position the jacket sits close and then follows your movements. Thanks to the high performance TRITON fabric, ASSOS have been able to tailor the jacket closer to the body, resulting in less volume and no “balloon effect,” providing total freedom of movement. This is a jacket ideally suited for hard riding and racing on-the-rivet when the rain is incessant.Features:Materials: 62% Polyamide(Nylon), 18% Polyurethane, 13% Elastane(Spandex), 7% PTFEExclusive TRITON waterproof/breatahble fabricElastic shoulder inserts for increased freedom of movement.Ventilated upper rear panel.'Pocket slots' on the lower rear panel - also act as ventilation zonesTaped seams on front, shoulder and rear panels.Rear panel emergency pocketExtended rear panel to protect lower back from road spray and dirtAdjustable fit, elastic 'snuggies' around collar and wristsRacing cutBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Profile Design Sonic Ergo Aerobar Time Trial ExtensionsReady for intense road use, the fantastic Sonic Ergo Aerobars are ideal for performance-focused time trial (TT) riders. Engineered by Profile Design for versatility, this superb pair enables you to benefit from up to 100 distinct position options which are achievable by simply adjusting the armrests. When combined with the risers, these offer 1500 possible configurations to make it one of the most adjustable clip-on bars on the market. Features: Use: Road Armrest: 10mm pads Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) Offset: -70mm to -2.5mm in 7.5mm steps Minimum Stack: 60mm Angle: 35A Option: 35° ; 45A Option: 45°; T5+ Option: 13° Compatibility: Profile Design riser handlebars which add up to 130mm stack with (70mm of spacers added) Weight: 559g (Bracket: 234g Armrest: 130g Extensions: 195g)Buy Profile Design Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Profile Design Sonic Ergo Aerobar Time Trial ExtensionsReady for intense road use, the fantastic Sonic Ergo Aerobars are ideal for performance-focused time trial (TT) riders. Engineered by Profile Design for versatility, this superb pair enables you to benefit from up to 100 distinct position options which are achievable by simply adjusting the armrests. When combined with the risers, these offer 1500 possible configurations to make it one of the most adjustable clip-on bars on the market. Features: Use: Road Armrest: 10mm pads Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) Offset: -70mm to -2.5mm in 7.5mm steps Minimum Stack: 60mm Angle: 35A Option: 35° ; 45A Option: 45°; T5+ Option: 13° Compatibility: Profile Design riser handlebars which add up to 130mm stack with (70mm of spacers added) Weight: 559g (Bracket: 234g Armrest: 130g Extensions: 195g)Buy Profile Design Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Sonic/Ergo/43a aerobar is a great option for any rider looking for a neutral wrist angle and positioning versatility.The 43a is an enhanced version of the popular t3 extension,The Sonic/Ergo platform offers a large range of adjustment in every dimension ÔÇô enabling riders to optimise the comfort of their position,The 43a extension offers a ÔÇÿwrist reliefÔÇÖ style bend that is intended to allow the extension to hug to the arm for improved aerodynamics without sacrificing wrist comfort,Fit range: Armrest Offset -70mm to -17.5mm in 7.5mm steps, Armrest Width 124mm to 290mm in 18.5mm steps, Armrest Stack 60mm, Extension Width 100mm.
Key Features:This is the most adjustable clip-on bar on the market (and in history),The main purpose of an aero bar is to get the rider into a fast position and despite a fairly minimalist appearance the Sonic/Ergo range offers a comprehensive fit range for exactly this purpose,The extension length and rotation can be easily adjusted using the top bolt,There are 100 distinct position options achievable just by moving the armrests,Combine that with the risers and this bar offers 1500 possible configurations,As a clip on bar, it is also possible to adjust the extension width and tilt easily,It is worth noting that our previous top-level clip-on aero bar, the J4/F35 (featuring on carbon clip-on), offered 90 possible configurations,This increase highlights the significant step forward we have made with our new generation aero bars in allowing riders to precisely adjust their position,The Ergo armrest shares the flippable design of the rest of our new generation armrests that means by swapping sides or rotating the armrests, smaller increments of movement are achieved - making it simple to fine-tune a rider position or match the position from their previous aero bar or bike,The 35a extensions offer a popular 35deg ski bend shape,Extensions are 400mm long to allow a wide range of riders to fit,The cable routing is designed to exit from the rear of the extension,Armrest Offset: -70mm to -2.5mm in 7.5mm steps,Armrest Width: 124mm to 290mm in 18.5mm steps,Armrest Stack: 60mm to 70mm in 5mm increments,Weight is 559 grams.
This carbon post is the go to conversion part to allow a change in body position on the bike to suit time trailing or triathlon riding effortsThe saddle is pushed further forward moving the centre over the bottom bracket in the same way as a steeper seat tube angle on a specific TT bikeA more powerful aerodynamic position can be achievedTraditional 73 degree seat tube angles are increased to 78 degrees with a physical move forward of up to 38 mmMulti-layer multi-directional carbon fibre weave to soak up road shock and deliver aerodynamicsForged 6061-T6 aluminium head construction for strength where it's needed27.2 mm diameter300 mm longWeight is just 210 grams
Dual Angular Contact,this describes the use of both angular contact bearings and angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. Here are a few key points of the AC-2 BMX Front Hub: The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell without any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in perfect alignment with each other! This ensures superior bearing performance and less chance of premature wear. Hub shell literally floats on the axle. The only force on the bearings is supplied by the wave spring (which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! ###section### Product Specs AXLE SIZE: Females Bolts SPOKE HOLES: 36h BEARINGS: Steel 20mm angular contact WEIGHT: 245g / 8.64oz