The Allpine Light Eco cleaner is a deep-cleaning, highly efficient and biodegradable bike cleaner that is formulated using pine oil - this superb bike cleaner is ideal for quick cleaning without the need to rinse using water afterwards. With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its formula is very effective against dirt and does not require rinsing, making it ideal also for electric bikes (E-Bikes). Biodegradable Pine Oil Eco Bike Cleaner Allpine Light is harmless to the environment but very effective against dirt. After using it, you can get on a clean bicycle with a nice pine scent - a good way to start an epic ride. It is also ideal for E-Bikes since there is no need to rinse it away after cleaning. There are times when you are in a hurry and a quick cleaning is sufficient, or – especially for e-bikes - you want to limit the use of water close to electrical contacts. For these situations of moderate dirt, Allpine Light and a rag are enough to clean the bike, without the need to rinse with water. Use Without Rinsing: - Spray Allpine Light on a clean rag and wipe the entire frame - After cleaning, the surface will be shiny, with an anti-water and antistatic effect - As it does not contain silicone, it avoids that annoying sticky effect which is a real dust magnet. The surface thus treated also facilitates the flow of water - Note: Allpine Light does not remove the lubricant from the chain, so it is not necessary to relubricate it after such a cleaning - When the going gets tough, it doesn't hold back - If the bike is very dirty and / or muddy, you have to perform a serious cleaning Use With Rinsing: - Generously spray Allpine Light all over the bike - Wait a few minutes to let the product act - Rinse with plenty of water. A sponge or brush is recommended for an optimal result - Dry with a clean cloth. If needed, use more Allpine Light - without rinsing - to remove any streaks or traces of dirt - Lubricate the bicycle (chain, suspension, moving parts) after such a thorough cleaning
This Cleaner is also multi-purpose, as it can even be used as a carbon paste to prevent seatposts slipping in carbon frames.
It may not look much but if cleaned after every use, it will clean up chains time and time again. Step 1. Step 2. Step 3. Directions for use: 1) Apply Fenwick’s Foaming Chain Cleaner and allow to soak in 2) Insert chain into ‘V’ slot of sponge on the lower section of the chain 3) Holding sponge firmly in position, run the chain backwards through the sponge for 30 seconds 4) Rinse the chain thoroughly with clean water 5) Re-lube with any Fenwick’s chain lube 6) To clean the sponge, just apply some Fenwick's Foaming Chain CLeaner to the ‘V’ slot straight after use, rub it in and rinse thoroughly.
Fenwick's Concentrated Bike Cleaner is a complex mixture of surfactants and sequestrants. It may be diluted using 10 parts water to create a “ready to use” Bike Cleaner or used neat in chain baths. Concentrated Bike Cleaner works by attracting dirt, surrounding it and making it easy to rinse away. Fenwick’s Concentrated Bike Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. This simple concept works across all types of finishes, be it, matt, carbon or gloss, leaving a clean, contaminate free surface. The Concentrated Bike Cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use as a Bike Cleaner 1) Using the fill level mark on a Fenwick’s spray bottle, dilute 1 part Concentrated Bike Cleaner to 10 parts water. 2) Spray bike thoroughly with the diluted mixture 3)Allow to soak in for a couple of minutes. 4) Agitate dirt with brush or sponge. 5) Rinse thoroughly with clean water. Directions for use as a Degreaser 1) Apply to drivetrain or parts that need degreasing – can be used in any chain bath and allow to soak in for a couple of minutes 2) Agitate with brush or sponge 3) Rinse thoroughly with clean water
Fenwick's Disc Brake Cleaner’s triple solvent formula is designed to clean a wide range of contaminants. The product has been engineered to give a slightly slower evaporation time, thus allowing for a better, deeper clean, resulting in a dry, fully degreased finish. May improve braking performance and reduce brake squeal. Directions for use: 1) Initially, spray from a distance of 20cm to wet down the surface to be cleaned – use short blasts 2) Leave for 10 seconds 3) After surfaces have been wetted, blast away contaminants by moving the aerosol closer and using prolonged bursts. Catch residue with an absorbent cloth Top tip: If used as a chain degreaser re-lube using a Fenwick’s chain lube
Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
From the minute you start using FS-10, you’ll know that something is very different. Not only do the natural ingredients smell nice, but they also enhance the performance of FS-10.
This superb pack contains three bike care products for protecting and maintaining your bike. Wet Lube - 4oz Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection. Super Bike Wash - 4oz Use Super Bike Wash™ to quickly clean dirt, clay, road grime, chain soils, nutritional residues and winter storage grime off all surfaces of your bike with little to no scrubbing. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high-speed cleaning system. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime off the drivetrain and safe enough to remove all the grime that builds up on the frame, saddle, brakes, and handlebar tape. Safe for carbon fibre, titanium, aluminium, steel, and clear coat. Recommendation: Use Super Bike Wash™ every second or third ride to keep your bicycle looking like new and to remove the contaminants that slowly but surely starts to degrade look and performance of a bicycle. Multi-bike Degreaser - 4oz Strong and safe! A new technology degreaser that quickly cleans without damage to rubber or plastic components. Strong enough for the grimiest metal parts, yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, painted surfaces, etc... Multi-bike Degreaser features 100% active (no water) biodegradable degreasing solvents, so bicycle chains and gears are cleaned more quickly, and often without a need for a water rinse. Less time cleaning means more time riding! Powerful soy-extracted solvents break down grease, grime, and stubborn soils with amazing ease and will biodegrade rapidly when they get in the environment.
This top-quality model is formulated with powerful and natural citrus extracts for faster drivetrain cleaning and less scrubbing. Additionally, this superb technology will break down and remove the grease, oil and wax that builds up. Finally, you can rinse with water for a residue-free finish.
Latest technology degreaser and cleaner that removes dirt and grease without damaging fragile plastic and rubber components. Additionally, it is strong enough for the grimiest metal parts, yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers and painted surfaces. Finally, its powerful soy-extracted solvents break down grease, grime, and stubborn soils with amazing ease and will biodegrade rapidly when they get in the environment.
This superb model ensures your bike and components will stay clean for longer intervals. Additionally, it's safe for use on clear coat, carbon fibre, aluminium, titanium, steel, chrome, and stainless steel. Instructions for use: Simply spray on and let sit for 10 seconds. Then wipe off with a clean rag. Due to Showroom’s proprietary formulation, there is no need to pre-wash the bike. Enjoy the shine!
This stunning model is formulated with specialised solvents which break down grease and grime and other solvents whose speciality is removing organic soils like dust and dirt. Additionally, for most applications speciality brushes and tools are not required. Finally, since it leaves no residue and dries rapidly, lubricant can be immediately applied and the bike can go on its way.