Directions for use: Step 1 - Thoroughly rinse drive chain area before application. Step 2 - Apply Bio Chain Cleaner to drive chain area. Agitate grime with a brush or sponge. Step 3 - Rinse entire drive chain area with fresh, clean water.
RapidRacerProducts EnduroGuard Front MudguardA unique mudguard, the EnduroGuard Mudguard can be used either on the front of your mountain bike or on the rear. It prevents mud, water and whatever else the trail throws up from the back of the tyre from reaching your face or back. Plus, in addition to keeping you clean, it protects your frame's rear linkages too. Clip on Mountain Bike MudguardAvailable in two sizes, the "standard" model suits shorter travel cross country and 4X forks with 80-120mm travel. The longer "large" model is best for trail, enduro and downhill bikes with 130-200mm travel.Features:Works as a front or rear mudguard Front guard protects you, rear guard protects your linkages and shock Available in two sizes, to fit all bikes Weight: 23g (standard), 26g (large)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Front MudguardA unique mudguard, the EnduroGuard Mudguard can be used either on the front of your mountain bike or on the rear. It prevents mud, water and whatever else the trail throws up from the back of the tyre from reaching your face or back. Plus, in addition to keeping you clean, it protects your frame's rear linkages too. Clip on Mountain Bike MudguardAvailable in two sizes, the "standard" model suits shorter travel cross country and 4X forks with 80-120mm travel. The longer "large" model is best for trail, enduro and downhill bikes with 130-200mm travel.Features:Works as a front or rear mudguard Front guard protects you, rear guard protects your linkages and shock Available in two sizes, to fit all bikes Weight: 23g (standard), 26g (large)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Off-Road Mudguard The RearGuard Off-Road is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 20 seconds and stays put!The RearGuard is designed for use off road on either a mountain bike or CX bike, it's a fast fitting mudguard for those last minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back The 3 new creases add stability and strength and the additional length adds protection over rough terrain Features: Quick and easy to fit Offers protection from mud and spray Velcro fastener ensures a secure fit Weight: 41gNot recommended for use with dropper seat posts.Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Road Mudguard The RearGuard ROAD is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 10 seconds and stays put!Features: Quick and easy to fit Offers protection from road spray Velcro fastener ensures a secure fitBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Standard Front MudguardThe EnduroGuard is a unique mudguard, which can be used as a front or rear guard. When used on the front, it stops the mud and spray that the back of the front tyre throws in your face. On the rear, it protects your linkages and shock from mud and spray. Perfect compatibility for cross country or 4x, the standard works on short travel XC and 4X forks from 80mm to 120mm. Features:Works as a front or rear mudguardClip on mudguardWheel & Tyre Compatibility: all wheel sizes and tyres up to 3"Fork Compatibility: 80mm to 120mmWeight: 23g (standard)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Standard Front MudguardThe EnduroGuard is a unique mudguard, which can be used as a front or rear guard. When used on the front, it stops the mud and spray that the back of the front tyre throws in your face. On the rear, it protects your linkages and shock from mud and spray. Perfect compatibility for cross country or 4x, the standard works on short travel XC and 4X forks from 80mm to 120mm. Features:Works as a front or rear mudguardClip on mudguardWheel & Tyre Compatibility: all wheel sizes and tyres up to 3"Fork Compatibility: 80mm to 120mmWeight: 23g (standard)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
This innovative product is a must-have. It’ll keep moisture out, creating a durable anticorrosive layer of protection on your bike’s frame, chain, metal parts, plastics and paintwork. And on parts that have already got some rust showing, it’ll get rid of it altogether. It creates a weather and impact-proof film coating to protect your paintwork and components and even disperses rust and corrosion. Ideal for maintaining your ride’s fresh look, it creates a barrier that lasts for 12 months so you can ride worry-free. To make it super easy to check that you’re protected, Muc-off has added a UV dye. With a UV light (sold separately) you can check it’s correctly in place and ready to protect your bicycle, e-bike or motorcycle. This means you can get out there and enjoy the ride, no matter what the weather.
Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Environmentally friendly, easy to rinse off and highly effective, this degreaser will help you components to look and perform like new again.
Formulated to provide a professional clean in seconds, this high-quality bike cleaner removes grit and grease from chainrings, cassettes, chains and derailleurs. This means you will spend less time cleaning your bike and have more time in the saddle.