Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 275 Carbon Frame - BlackFeaturing an ultra-strong T700/800 monocoque carbon fibre construction, this race-ready full-suspension mountain bike (MTB) frame delivers increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also equipped it with updated geometry for smooth handling and internally piped cable routing for a clean, sleek appearance. Engineered for the most demanding of racing conditions, it also comes kitted out with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is an ideal choice of upgrade for completing your enduro bike build.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Carbon Fibre Full-Suspension Enduro MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include:· All new UD Carbon chassis· Improved suspension kinematics· Tube-In-Tube design for easy cable installation· All new geometry· Optimised sizing/fit - Small to XXL· SRAM UDH· Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Features: Material: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong T700/800 monocoque UD Carbon Fibre frame Use: Mountain Bike (MTB) frame Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: Nukeproof, 44-56 IITS, ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.88Kgs/8.55lbs (Tubeless) Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE M730 Carbon MTB Rims with Pro 4 HubsFor durability without compromising speed, ENVE's M730 MTB rims are the perfect solution for anyone looking to the future of Enduro and All Mountain riding. With a rim 27mm and 38mm wide, expect to utilise excellent aerodynamics and traction even on climbs with an effective ride smoothness to boot. Additionally, with ENVE's Protective Rim Strip technology, feel comfortable optimising your tyre pressure without risking damage to the rim, freeing you to perform even at super-low pressures.Complete with Durable Pro 4 HubsBuilt for durability, these alloy hubs use a 44-tooth drive mechanic to allow for excellent power transfer while also remaining lightweight, so you can press your advantage even further on the track knowing you'll get just energy back as you put in.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 30mm Rim Width External: 38mm Spoke Hole Count: 32 Recommended Tyre Width: 2.3 - 2.5" Weight: 552g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE M735 Carbon MTB Rims with Pro 4 HubsIncredible strong and built to last, ENVE's M735 rims are a wider iteration of the M730 model that offers even greater traction and stability on the track. With a deep 27mm profile and a 100% UD carbon material, these rims offer brilliant aerodynamics for speed build-up while remaining lightweight to allow you to ascend and descend with maximum control. Plus, with ENVE's Protective Rim Strip technology, dare to choose a wider range of tire pressures without risking damage to the rim.Optimised with Pro 4 HubsThese rims come complete with a set of Pro 4 Hubs, each designed for durability while also offering excellent power transfer so that you get the most out of each pedal.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 35mm Rim Width External: 41mm Spoke Hole Count: 32 Recommended Tyre Width: 2.5 - 2.8" Weight: 558g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega 297 Carbon Frame (EXT Shock)The Mega 297 Carbon EXT features an ultra-strong monocoque carbon fibre construction that is equipped with a durable and high-performance EXT STORIA LOK V3 Coil rear shock. This mountain bike (MTB) frame offers the best balance of stiffness, strength and low weight performance for intense trail riding. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish.For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing.Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.EXT STORIA LOK V3 Rear ShockThe STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working.In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydralic bottom out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues.This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel.The STORIA V3 is also designed to serve riders who want maximum performance of a pedal-platform equipped shock, with a great support on the last millimeters of bike rear travel, with the great performance of a coilover shock.Nukeproof's Ultimate Enduro Race BikeAfter winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangleThe updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.Nukeproof has provided a setup guide for the EXT V3 rear shock. It can be downloaded hereEXT STORIA LOK V3 Rear Shock Sping "Weights"400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large550lbs - XX-LargeFeatures: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)EXT STORIA LOK V3 Rear Shock Benefits: Custom tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology - Progressive opening - Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swapBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
This super-enduro race frame offers the best balance of stiffness and strength at a low weight for intense trail riding performance. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. Full Suspension Carbon Fibre MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium. Nukeproof's Ultimate Enduro Race Bike After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangle The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required. EXT STORIA LOK V3 Rear Shock The STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working. In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydraulic bottom-out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues. This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel. The STORIA V3 is also designed to serve riders who want the maximum performance of a pedal-platform equipped shock, with great support on the last millimetres of bike rear travel, with the great performance of a coil-over shock. EXT STORIA LOK V3 Rear Shock Sping "Weights" 400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large 550lbs - XX-Large Features: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option) EXT STORIA LOK V3 Rear Shock Benefits: Custom-tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology – Progressive opening – Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory-tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swap