With the advent of thru-axle technology; first on forks and more recently on frames, moving wheels between different bikes can cause headaches. However one of the main benefits of Hope's hub range is that they can be quickly converted to run any front or rear axle standard on the market today. The conversion kits are constructed from the same high grade CNC machined aluminium and simply press fit into the ends of the hub body to have you up and running in minutes.
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Hope XCR Pro lever is the ultimate in lightweight design, giving you the best in class XC brake. With a Carbon lever blade and titanium hardware, combined with an XCR X2 caliper you have the benchmark XC brake. There s lever reach adjustment so you can fine to tune your preference and installation is made easier with a hinge clamp. They also give you a 10% increase in power compared to the Race Evo brakes.Anodized for durabilityAvailable in Silver with black hose onlyWeight from 199gLightweight minimalist designCarbon blade and titanium hardwareLever reach adjustmentHinge clamp for easy installationCNC Machined from high grade forged aluminium billet10% Power increase over Race Evo leverCompatible with all current Tech 3 shifter mounts Caliper Specs:Crimped hose design on caliperPost mount 9.74mm caliperRigid CNC'd 2014 T6 aluminium alloy one-piece caliperTop entry pad fittingLightweight aluminium backed pads
The Hope XCR Pro lever is the ultimate in lightweight design, giving you the best in class XC brake. With a Carbon lever blade and titanium hardware, combined with an XCR X2 caliper you have the benchmark XC brake. There s lever reach adjustment so you can fine to tune your preference and installation is made easier with a hinge clamp. They also give you a 10% increase in power compared to the Race Evo brakes.Anodized for durabilityAvailable in Silver with black hose onlyWeight from 199gLightweight minimalist designCarbon blade and titanium hardwareLever reach adjustmentHinge clamp for easy installationCNC Machined from high grade forged aluminium billet10% Power increase over Race Evo leverCompatible with all current Tech 3 shifter mounts Caliper Specs:Crimped hose design on caliperPost mount 9.74mm caliperRigid CNC'd 2014 T6 aluminium alloy one-piece caliperTop entry pad fittingLightweight aluminium backed pads
The SR12.2 Chain Whip & Sprocket Remover from Park Tool has been specially heat treated to prevent flexing and bending and boasting Park Tool legendary build quality. This Chain Whip also has a sprocket remover which fits Park Tool Freewheel/Cassette lockring tools. This also features a moulded handle which provides a great comfortable grip.
The Pro wheel-set is a light and strong build aimed at the more experienced rider. At home on your dirt bike or all mountain the 26" version is built around the thret rim. The 24" is built around the deevee rim.All our wheels are designed to be tough and good value, they are available individually allowing a mix and match approach. The range provides a choice of wheels for dirt jump, street riding, downhill or free-ride use.All the wheels include DMR rim tape (in red and black of course!) and are built to the same high quality and hand finished to high standard; stress relieved and re-tensioned to ensure a durable tough wheel. The black rims and spokes with deep red anodized hubs look the business too.26" Wheel Info:Front32 hole , Cross 3 , 990 grams20mm through axle hub, with international standard (6 bolt) disc brake mounts in a choice of red or black with matching spoke nipples.Laced onto a DMR Thret Rim using black plain gauge spokes.Rim tape included.REAR - 9 Speed32 hole , Cross 3 , 1290 grams10/135mm axle hub with fixing bolts to secure your wheel into your frame (quick release could also be used (not included), with international standard (6 bolt) disc brake mounts and a 9 speed freehub in a choice of red or black with matching spoke nipples.Laced onto a DMR Thret Rim using black plain gauge spokes.Rim tape included.Rear - 1 to 6 Speed32 hole , Cross 3 , 1340 grams10/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples. CLICK HERE for more information on this hub.Laced onto a DMR Thret Rim using black plain gauge spokes.Rim tape included.24" Wheel Info:FrontPRO level dirt jump wheel. The DV rim-braking surface is blended into the D profile of the rim. At 32mm wide this double wall section rim is single eyeleted for incredible strength. The rim has a D section giving it good radial strength for dirt jumping, BSX and street riding. Black stainless steel spokes. Red anodised 20mm cartridge bearing disc hub , converter available to fit standard 9mm drop-outs, includes DMR rim tapeREAR - 1 to 6 Speed32 hole , Cross 310/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples.Laced onto a DMR DEEVEE Rim using black plain gauge spokes.Rim tape included.NB: 9mm conversion kit available separately, the 20mm front hub does not come with this kit as standard.
The Park Tool SA1 Shop Apron protects your clothes and gives the advantage of large pouch pockets whenever you work in the shop. These full-length, shop quality aprons are made of a heavy 7-ounce cotton twill for comfort and durability. Navy blue with white embroidered Park Tool logo.
The RRP ProGuard Hook & Loop straps to quickly attach and remove Proguard V2. Pack includes 8 hook & loop straps.
The RRP ProGuard Hook & Loop straps allows you to quickly attach and remove the Proguard V2 mudguards. This pack includes 8 hook & loop straps and includes rubber pads to protect fork legs.
The Nukeproof Horizon CS CroMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal.Cold forged T1- 6061 alloy body with CNC finishing and CrMo axle are light & super strongProven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair)Low profile contoured chassis with optimised leading edge for improved ground clearanceDual Engagement Mechanism is compatible with Shimano SPD cleats (Nukeproof cleats supplied)The Horizon CS pedals offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win. The SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float. If you want a lightweight, tough & stylish SPD pedal for your trail or enduro bike, the Nukeproof Horizon CS is the perfect choice!
The Enduro Pro Elbow Guard from Fox are built to pedal and to protect. They are designed to offer maximum protection while minimizing bulk and weight. This trail friendly guard has you covered wherever the trail takes you.Designed to offer maximum protection while minimizing bulk and weight. This trail friendly guard has you covered wherever the trail takes youMoisture wicking micro-lycra sleeve with nylon mesh forearm panel for increased air flowKPU material provides excellent abrasion, wear and skid resistance without sacrificing mobilityCustom moulded D3O elbow inserts designed by and exclusive to FoxSlip on design for reduced bulk. Silicon grip top and bottom to hold the guard in placeD3O elbow inserts are removable for convenient and quick washingElbow inserts are EN1621-1 Level 1Size Chart:
Set the correct gap for any hydraulic brake caliper with the Lifeline Pro Disc Brake Caliper Alignment Tool. Easy to use and prevents brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor.Follow the simple steps below:Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side.Insert the Caliper Alignment Tool between the pads and the rotor.Pull the brake lever- forcing the pads against the alignment tool and in turn against the rotorWhile still holding on to the brake lever, tighten the bolts on the brake caliper.Release the brake lever and remove the tool and your pads should now be cantered to the rotor with an equal distance either side.Weight: 33gSize: 15cm x 3.5cmBlade length: 13cm