These custom, Swiss made bearings are double sealed, fully serviceable, and removable which give a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers, again increasing life and reliability. Hope uses a noncontact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.
The new, advanced non-contact Labyrinth seals yield a buttery-smooth spin with unparalleled protection against dust, water and mud. Ultra rigid plastic caps give high compression and deformation resistance, facilitating crisp shifting. Constructed of CNC machined 7075 aluminium. Adaptor cups and bearings for the installation of 24mm cranks in BB30 PF frames.
The new, advanced non-contact labirynth seals yield a buttery-smooth spin with unparalleled protection against dust, water and mud. Ultra rigid plastic caps give high compression and deformation resistance, facilitating crisp shifting.
These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again increasing life and reliability. Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 73mm and 83mm shell width's.
Ceramic Bottom Bracket compatible with 30mm axle chainsets.
This superb package is one of the most eagerly anticipated groupsets of recent years. Additionally, this stunning set includes a Shimano press fit BB86 bottom bracket. Smooth, crisp and precise shifting combined with reliable and powerful braking makes this an immensely efficient groupset. Included: 2x Shimano ST-R7020 Levers (gear and brake cables included) 2x Shimano 105 R7000 Rim Brake Calipers 1x Shimano FC-R7000 Chainset, 50/34T 1x Shimano FD-R7000-L Front Derailleur (Braze-on type, downswing 1x Shimano RD-R7000 Rear Derailleur 1x Shimano R7000 11-Speed Cassette, 11-30T (Shimano 9-11-Speed freehub compatibility) 1x KMC X11 11-Speed chain 1x Shimano BB-SM-BB72-41 Pressfit Bottom Bracket Includes all Shimano SP41 outer cables, brake inner cables and gear cables R7000 Chainset: With the 105 R7000 Compact Chainset, Shimano has found the perfect balance between weight, efficiency and comfort without sacrificing stiffness or power-transfer.This crankset design pushes advancements in modern drivetrain performance and provides levels of efficiency and comfort that until now have not been achieved. Chainset Features: Material: Crank Arms, Chainrings: Aluminium; Axle: Steel Bolt Circle Diameter: 110mm Q-Factor: 146mm Bottom Bracket Standard: HollowTech II Chainring Gear Ratio: 52-36T Compatible Chain: HG-EV 11 speed / HG-X11 Drivetrain Speed: 11 speed 105 R7000 Double Shifter Set The 11-Speed Shimano 105 R7000 Shifter Set is the evolution in Shimano mechanical drivetrain performance. Borrowing trickle-down technology from the Dura-Ace and Ultegra high-end competition shift levers, these levers provide crisp, super-smooth shifting and brake performance that feels absolutely superb to use. Re-Designed, Enhanced and Optimised The internal shifting mechanism has been re-designed and enhanced to provide smoother operation and more precise actuation when shifting between gears, even when under load. The lever features a greater reach-adjustment range with very easy access to the inner shift cables when the time comes to maintain/adjust. This new system provides a fast and easy shifting experience, which ensures that race performance is always at 100%, and as a bonus, Shimano has fine-tuned the front lever shifting curve, which makes for a much lighter front derailleur shifting compared to previous models. Features: Material: Aluminium Type: Dual Control, SLR-EV Brake System: Mechanical Drivetrain Speed: 2x11 speed Weight: 251g 105 R7000 Front Derailleur: The 11-Speed Shimano 105 R7000 Front Derailleur has an ergonomic, smooth to shift power-stroke, which provides a very natural shifting feel and lighter mechanism actuation. It also is compatible with most cable routing options on the market and comes equipped with an integrated cable tension adjustment screw for superb adjustability and convenience. Features: Material: Clamp: Aluminium; Plate: Steel Mount: Braze-on Type: Double Compatible Chain: HG-EV 11 speed / HG-X11 Top Gear Teeth: 46-53T Total Gear Capacity: 16T Drivetrain Speed: 11 speed Weight: 95g 105 R7000 Rear Derailleur (Medium Cage) The Shimano 105 R7000 Rear Derailleur features Shimano Shadow technology, which not only smooths shifting performance but also stabilises chain movement and keeps the derailleur low-profile, tucked tight to the chainstay. It is capable and fully efficient at shifting across a wide gear ratio while doing so with buttery-smooth shifting performance. Rear derailleur drivetrain performance has never been as smooth, reliable and as precise as this! Features: Material: Aluminium Drivetrain Speed: 11-Speed Compatible Chain: HG-EV 11 speed / HG-X11 Total Capacity: 35T Max Front Ratio Difference: 16T Low Sprocket: Max: 30T; Min: 25T Top Sprocket: Max: 14T; Min: 11T Pulley: 11T Weight: 225g 105 R7000 Rim Brake Calipers The 105 R7000 Brake Caliper is the latest innovation in affordable, pro-level braking performance from Shimano. Providing an exceptional linear braking curve, enabling you to precisely time your braking with more accuracy than ever before. It provides a very noticeable balance between feel, stiffness, stopping power and response; it is the most inspiring brake system to use for the aspiring podium chaser. Compatible with SLR-EV brake levers to provide the optimised braking control and elegant performance. Features: Material: Aluminium Type: SLR EV Dual Pivot Reach: 51mm Maximum Tyre Size: 28c Weight: 379g 105 R7000 Cassette The Shimano 105 R7000 Cassette provides precise 11-Speed shift ramping and is a foundation for top-level drivetrain performance. Designed to provide wider gear choices and wider ratios to suit individual rider preference and to provide a range of options to suit the task at hand. Featuring a durable, lightweight construction, which is weather and wear resistant while providing professional level 11-Speed drivetrain performance. Features: Material: Sprockets: Steel, Nickel Plated; Spider: Aluminium Type: HG-EV Compatible Chain: HG-EV 11 speed / HG-X11 Drivetrain Speed: 11 speed Weight: 284g (11-28T) Please Note: The 11-34T version of this cassette is the "CS-HG700" model as Shimano does not make the CS-R7000 in an 11-34T version. 105 R7000 HG701 Chain New symmetrical design chain that offers smooth shifts and maximum durability. It has been designed to run specifically with Shimano 11-speed Dyna-Sys systems for optimal pedalling efficiency. Features: Outer plate design has been developed to reduce the chance of chain suck Sil-Tec surface treatment technology (PTFE plating) on inner links that is smooth running and increases durability Number of Links: 116 The inner plate has been developed for better contact with gears providing smoother shifting under high load, giving efficient pedalling, increased rigidity and near silent running Chain Width: 5.62mm Average Weight: 257g
It was never going to be easy to improve on the Ultegra 6800 but there are clear improvements with its aesthetics and performance. Shimano has evolved the Ultegra series, which hugely benefits from the joys of its bigger brother's technology, Dura-Ace R9000. Infused with state-of-the-art technology, the Shimano Ultegra R8000 groupset is superbly stiff, light, and responsive. This Ultegra groupset is a major upgrade on any racing or training road bike. Shimano Ultegra R8000 Hollowtech II Crankset This FC-R8000 Hollowtech II Crankset will make sure you transfer power into speed. With the added bonus of offering weight reduction without sacrificing stiffness, this crankset supports a wide range of gear combinations to suit the fastest downhill section and the steepest mountain pass. The crankarm is redesigned to provide your bike with a fine aesthetic upgrade. Features: Bolt Circle Diameter: 4x110mm asymmetric Chainline: 43.5mm New 4-arm design for a stiff, lightweight performance Hollowtech II construction Hollowglide chainrings 11-Speed Compatible Same bolt circle diameter for compact and traditional double chainsets means that one crankarm fits all chainring sizes Weight: 681g (52-36T), 674g (50-34T) Dual Control Shifters Set STI Ultegra R8000 Offering an increase in accuracy and shifting precision, these Dual Control Levers have a greater reach for adjusting your break and gear levers. The internal shifting unit is updated to offer quick and intuitive shifting. *Please Note: Supplied with inner Gear cables only and does not include brake cables. Features: Material: Carbon Fibre (brake lever) Shift Cable: Polymer coated Ergonomic design with greater reach Light action, define click engagement, vivid index shifting Updated internal shifting unit Powerful and controllable braking system Weight: 438g (Set) Ultegra Rear Derailleur R8000 The RD-R8000 reduces shifting effort at the lever whilst retaining a quick and precise response. Featuring integrated Shadow RD Technology with its race-proven, low-profile design, the rear derailleur is more compact and fits closer to the frame, ensuring less damage in a crash. Features: Shadow RD Technology Precise and accurate shifting Weight: 200g (Short Cage) Ultegra Front Derailleur R8000 The FD-R8000 evolves to provide an ultra-smooth shifting action that flawlessly moves your chain up and down whenever required. with zero delays, you can enjoy a shift that is crisp and concise. Features: Mounting Type: Braze-on Newly designed pull arm for more direct and easy shifting Weight: 92g Ultegra Brake Set R8000 Enhanced with a new, sleek design, the Ultegra caliper brake has narrower gaps between the arms for a reduced profile and compatibility with 28c tyres. The stabiliser between the axles improves braking performance by delivering clear contact to bring you to a balanced stop. Features: Balanced stopping action Smooth and light operation with increased modulation Compatible with up to 28c tyres Weight: 360g (Set) 11-Speed R8000 Ultegra Cassette At the heart of Shimano's 'rider-tuned philosophy' lies their belief in offering superior choice. With a huge range of cassette options, you'll conquer any terrain. Features: Speed: 11-Speed Tooth Count: Separate 11-28T, 11-25T and 11-32T options Weight: 232g Shimano HG701 Ultegra and XT 11 Speed Chain Featuring a durable stainless steel build with a range of performance-enhancing technologies, the Shimano HG701 Ultegra and XT 11 Speed Chain offers smooth, crisp shifting for both road cycling and mountain bike (MTB) riding. Speed: 11-Speed Links: 114 Weight: 257g Technologies: Shadow RD: Traditional derailleurs extend wider than the profile of your bike. With its low-profile design, Shadow RD is a more compact derailleur that fits closer to the frame, with more direct cable routing. Shadow RD maintains a consistent distance to the cassette for increased shift stability. The reduced body width creates a sleek and smooth appearance, ensuring less damage in a crash. Please note that this groupset does not come supplied with outer cables. Front mech support plates not included. A 2-year warranty is offered with all Shimano products. Manufacturer's Part Numbers: R800017050341128P Grey 50/34T x 11-28 170mm R800017250341128P Grey 50/34T x 11-29 172.5mm R800017550341128P Grey 50/34T x 11-30 175mm
Kitted out with fully sealed cartridge bearings, this impressive bottom bracket lets you pedal with reliability, providing a supportive and steady hold as your crankset rotates freely. Attaching by its simple PressFit design, this is an excellent minimum effort, high-performance BB for the avid road rider.
With high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Featuring SRAM's renowned DUB system, this model reaps the benefits of lightweight bearings and a robust oversized crank spindle. Thanks to its new standard for drivetrain performance, easy adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage making adjustments.
A variant of the external bottom bracket, this SRAM BB86 GXP PressFit bottom bracket cuts weight and provides easier installation by allowing you to press the bearing cups into the frame instead of threading them. There's no change to the crank - spindle length and diameter remain the same. Technologies: GXP: Other systems rely on side-loaded bearings to eliminate play, causing bearing wear. GXP captures the left-side bearing between the spindle and the left crankarm and allows the drive-side bearing to float axially on the spindle. There's no need to side-load bearings during adjustment. No excess wear and much simpler installation. Just tighten to the proper specifications and you're ready to roll, worry-free. GXP's two bicycle-specific cartridge bearings and eight seals ensure a smooth, long-lasting ride. SRAM's Gutter seal system takes a two-stage approach in directing contaminates away from the bearings providing longer bearing life. GXP’s Gutter Seal design also reduces friction, 35% less drag than previous versions, improving rider feel and performance. Gutter seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups. SRAM'S design and material choice have dropped 15g out. PressFit cuts weight. Easier installation by allowing you to press the bearing cups into the frame. GXP compatible. Easy installation. ISO 4210 compliant. See Declaration of Conformity for details. Manufacturer's Part Number: 00.6415.033.020 Black 92mm - MTB Hollowtech Eng 00.6415.033.000 Black BB86 - Road
Pressfit BB to convert PF30 to BSA threaded
Featuring an integrated seal that’s pre-assembled into the cups, SRAM’s PressFit 30 bottom bracket is designed to keep out dirt and water that could cause increased wear and tear. Simple to fit, it is designed for road and mountain bike (MTB) frames with bottom bracket shells with a 46mm inner diameter and cranksets with 30mm diameters. The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell. When designing the SRAM PressFit 30 bottom bracket, the brand set out with the aim of combining the best of BB30 technologies with the best features of the Pressfit standard. The result of this is a sealed 30mm bearing system with superior bearing life. Manufacturer's Part Number: 00.6418.009.000