SRAM DUB Pressfit Mountain Bike Bottom BracketIf you need to replace your 30mm or 24mm SRAM crank spindle system, then this DUB Mountain Bike Bottom Bracket is the most unified replacement available. The DUB system uses a 28.99mm crankset spindle/inner bearing diameter and features the benefits of BB30 lightweight bearings whilst benefiting from the bottom bracket systems durability.Precise Bottom Bracket, Spindle and Bearing EngagementThe precise bottom bracket, spindle and bearing engagement is the foundation of DUB technology. This superb merger creates the ultimate in stiffness, reliability and performance without sacrificing weight. SRAM has set a new standard for drivetrain performance, adjustability and reliability by creating a system that is not complicated to set up and fine-tune; meaning everyone can have the highest levels of performance, without the need to spend hours in the workshop/garage.Features: Type: DubMaterial: Steel Compatible Frame Standard: Press-Fit 86mm, 92mm, 121mm Compatible Crankset Standard: SRAM DUB only Weight: 71g (PF92)Part No: BB-DUB-PF-A1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM DUB Pressfit Mountain Bike Bottom BracketIf you need to replace your 30mm or 24mm SRAM crank spindle system, then this DUB Mountain Bike Bottom Bracket is the most unified replacement available. The DUB system uses a 28.99mm crankset spindle/inner bearing diameter and features the benefits of BB30 lightweight bearings whilst benefiting from the bottom bracket systems durability.Precise Bottom Bracket, Spindle and Bearing EngagementThe precise bottom bracket, spindle and bearing engagement is the foundation of DUB technology. This superb merger creates the ultimate in stiffness, reliability and performance without sacrificing weight. SRAM has set a new standard for drivetrain performance, adjustability and reliability by creating a system that is not complicated to set up and fine-tune; meaning everyone can have the highest levels of performance, without the need to spend hours in the workshop/garage.Features: Type: DubMaterial: Steel Compatible Frame Standard: Press-Fit 86mm, 92mm, 121mm Compatible Crankset Standard: SRAM DUB only Weight: 71g (PF92)Part No: BB-DUB-PF-A1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM DUB Pressfit Bottom BracketOversized for maximum compatibility, the DUB bottom bracket meets the industry standard in terms of fitting and exceeds it when it comes to durability, performance and strength. Equipped with a pair of fully sealed cartridge bearings, it combines high performance with low maintenance, with this PressFit model making for quick and easy installation. The ideal bottom bracket for regular road riders, this superb SRAM model sets the bar. Features: Cup Material: Steel Crank Bottom Bracket Interface: DUB Spindle Diameter: DUB Bearing Type: Standard Bottom Bracket - Frame Interface: 86.5mm Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌SRAM DUB Road Pressfit Bottom BracketThis pressfit version of the DUB bottom bracket has been completely redesigned to be smoother, simpler and stronger than before. Featuring SRAM's renowned DUB system, this model reaps the benefits of lightweight bearings and a robust oversized crank spindle.Precise Bottom Bracket, Spindle and Bearing EngagementWith high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Thanks to its new standard for drivetrain performance, easy adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage making adjustments.Features: Material: Aluminium Compatible Frame Standard: Black 79mm: PF30 (79-83mm or BBRight); Black 73mm: PF30 (73mm); Black 83mm: PF30 (83mm) Compatible Crankset Standard: SRAM DUB ISO 4210 compliant One oversized spindle to work across every bottom bracket standard Greater bearing durability Easy installation Press Fit cups for lighter weight Integrated adjuster Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌SRAM DUB Road Pressfit Bottom BracketThis pressfit version of the DUB bottom bracket has been completely redesigned to be smoother, simpler and stronger than before. Featuring SRAM's renowned DUB system, this model reaps the benefits of lightweight bearings and a robust oversized crank spindle.Precise Bottom Bracket, Spindle and Bearing EngagementWith high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Thanks to its new standard for drivetrain performance, easy adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage making adjustments.Features: Material: Aluminium Compatible Frame Standard: Black 79mm: PF30 (79-83mm or BBRight); Black 73mm: PF30 (73mm); Black 83mm: PF30 (83mm) Compatible Crankset Standard: SRAM DUB ISO 4210 compliant One oversized spindle to work across every bottom bracket standard Greater bearing durability Easy installation Press Fit cups for lighter weight Integrated adjuster Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌SRAM DUB Road Pressfit Bottom BracketThis pressfit version of the DUB bottom bracket has been completely redesigned to be smoother, simpler and stronger than before. Featuring SRAM's renowned DUB system, this model reaps the benefits of lightweight bearings and a robust oversized crank spindle.Precise Bottom Bracket, Spindle and Bearing EngagementWith high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Thanks to its new standard for drivetrain performance, easy adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage making adjustments.Features: Material: Aluminium Compatible Frame Standard: Black 79mm: PF30 (79-83mm or BBRight); Black 73mm: PF30 (73mm); Black 83mm: PF30 (83mm) Compatible Crankset Standard: SRAM DUB ISO 4210 compliant One oversized spindle to work across every bottom bracket standard Greater bearing durability Easy installation Press Fit cups for lighter weight Integrated adjuster Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM PressFit 30 Alloy Bottom BracketTaking inspiration from the popular BB30 model, the PressFit 30 Alloy Bottom Bracket from SRAM gives you the best of both. Constructed from durable alloy, the seal is pre-assembled into the cups for long-lasting quality.The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets.Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell.Features: Easy installation PressFit cups for lighter weight Narrow Q-factor and more ankle clearance Integrated gutter seal to prolong the life Integrated adjuster Type: Press Fit 30 Material: Alloy Spindle diameter: 30mm Bearings: Steel - 40x30x7 Part No: BB-PF30-B2Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM PressFit 30 to BSA Adaptor KitGenuine SRAM bottom bracket convertor. Designed to convert a PressFit 30 BB shell to a traditional BSA thread.Features:Polymer cupsSet includes left- and right-hand cupsSealed cups keep out dirt and waterMaintenance freeCompatible with 68/73mm shells46mm cup diameterBSA inner ThreadEasy press-fit installationBicycle bottom brackets connect the cranks to the bike and allow the crank arms to rotate. There are various sizes of bottom bracket shell on the market, so compatibility needs to be checked. The three most common frame bottom bracket shell widths are 68mm (English threaded road and mtb), 70mm (Italian threaded road) and 73mm (British threaded mtb). There are also many axle shapes and styles, from JIS or ISO square tapers through to the round splined axles such as ISIS or Octalink and then there is the new external cup systems which have the axle built into the crank arms. Some frames are now using the new BB30 system which uses bearings pushed directly into the frame and removes the needs for cups to be threaded into the frame.
SRAM PressFit GXP Bottom BracketEnabling you to use SRAM or Truvativ GXP chainsets frames with pressfit bottom bracket shells, this bottom bracket reduces drag to make the most of your pedalling effort. The smooth operation is due to the fully sealed steel cartridge bearings, which has a tungsten finish to increase durability.Reasons to Buy: Reduces drag. Allows you to make the most out of your pedalling effort. Smooth operation. Fully sealed Steel cartridge bearings.Features: Type: PressFit (BB86 or BB92) Suits BB Shell Size: 41x86mm or 41x92mm Bearing Type: Sealed Cartridge Bearings Steel bearings with Tungsten finish Compatible with SRAM and Truvativ GXP chainsets only Weight: 89g (BB92)Manufacturer Reference Codes: 92mm - MTB: 00.6415.033.020; 86mm - Road: 00.6415.033.000Technologies: GXP: Other systems rely on side-loaded bearings to eliminate play, causing bearing wear. GXP captures the left-side bearing between the spindle and the left crankarm and allows the drive-side bearing to float axially on the spindle. There's no need to side-load bearings during adjustment. No excess wear and much simpler installation. Just tighten to the proper specifications and you're ready to roll, worry-free. GXP's two bicycle-specific cartridge bearings and eight seals ensure a smooth, long-lasting ride. SRAM's Gutter seal system takes a two-stage approach in directing contaminates away from the bearings providing longer bearing life. GXP’s Gutter Seal design also reduces friction, 35% less drag than previous versions, improving rider feel and performance. Gutter seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups. SRAM'S design and material choice have dropped 15g out.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM PressFit GXP Bottom BracketEnabling you to use SRAM or Truvativ GXP chainsets frames with pressfit bottom bracket shells, this bottom bracket reduces drag to make the most of your pedalling effort. The smooth operation is due to the fully sealed steel cartridge bearings, which has a tungsten finish to increase durability.Reasons to Buy: Reduces drag. Allows you to make the most out of your pedalling effort. Smooth operation. Fully sealed Steel cartridge bearings.Features: Type: PressFit (BB86 or BB92) Suits BB Shell Size: 41x86mm or 41x92mm Bearing Type: Sealed Cartridge Bearings Steel bearings with Tungsten finish Compatible with SRAM and Truvativ GXP chainsets only Weight: 89g (BB92)Manufacturer Reference Codes: 92mm - MTB: 00.6415.033.020; 86mm - Road: 00.6415.033.000Technologies: GXP: Other systems rely on side-loaded bearings to eliminate play, causing bearing wear. GXP captures the left-side bearing between the spindle and the left crankarm and allows the drive-side bearing to float axially on the spindle. There's no need to side-load bearings during adjustment. No excess wear and much simpler installation. Just tighten to the proper specifications and you're ready to roll, worry-free. GXP's two bicycle-specific cartridge bearings and eight seals ensure a smooth, long-lasting ride. SRAM's Gutter seal system takes a two-stage approach in directing contaminates away from the bearings providing longer bearing life. GXP’s Gutter Seal design also reduces friction, 35% less drag than previous versions, improving rider feel and performance. Gutter seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups. SRAM'S design and material choice have dropped 15g out.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Muc-Off Bicycle Pressure Washer BundleThe Bicycle Pressure Washer Bundle features the Muc-Off Bike Pressure Washer and dry bag, a snow foam lance, Nano Tech bike cleaner, Nano Tech concentrate, Bike Protect spray and a microfibre polishing cloth. This bundle gives you outstanding bike cleaning performance to get your pride and joy cleaned, gleaming and shining like new.Fast and Deep Cleaning Bike Optimised Pressure WasherThe Muc-Off Pressure Washer Bicycle Bundle includes all you need to get your bike back to that factory fresh look while also looking out for those delicate bearings, surfaces and suspension parts. This 10-in-1 bundle features three lances to cater for specific cleaning needs, as well as a Snow Foam Lance to transform your bottle of Nano Tech Bike Cleaner into the ultimate dirt destroying snow foam. A waterproof Dry Bag is also included, as well as a 1L bottle of Nano Tech Concentrate, Bike Protect and Microfibre Cloth. All you need is a power source and water supply and you'll be able to give your pride and joy the ultimate deep clean it deserves! Nano Tech Bike CleanerKeep your bike clean no matter what the trail throws at you, thanks to the Nano Tech Bike Cleaner from Muc-Off. Featuring an exceptional cleaning composition, you can easily remove dirt, grime and grease from your bike, from even the muddiest of trails. Powerful and Fully Biodegradable Bike CleanerThis Muc-Off Nano Tech Bike Cleaner has incredible cleaning power because it breaks down dirt and grime on microscopic levels without harming your bike's delicate finish. This bike cleaner doesn't even need any nasty, dangerous acids or chemicals. Even better, the Muc-Off Nano Tech Bike Cleaner is fully biodegradable, free from acids, CFC's and solvents, and it's alkaline based so you can clean away with a guilt-free conscience. You can use the Nano Tech Bike Cleaner on all surfaces - it's even disc brake rotor and pad friendly, so there's no excuse for a dirty bike. Even in winter! Bike Protect Aerosol Light Lubricant SprayProtect your bike from the elements, with this Aerosol Spray Lubricant from Muc-Off. Design to distribute water to prevent corrosion after washing, it covers your frame in a non-sticky layer that safeguards your bike and helps prevent excess dirt and grim from sticking, for an easier cleaning experience after a day out tackling challenging trails. Pressure Washer Features: Motor Power: 1200W Volt/Freq: 220-240V~50/60Hz Motor Type: Carbon brush motor Rated Pressure: 70 bar Permissible Pressure: 100 bar Max. Inlet Water Pressure: 1.2 MPa Rated Flow: 5.5L/min Max. Flow: 6.5L/min Max. Water Temperature: 50°C Water Protection Class: IPX5 N.W. / G/W.: 5.5/6.2 kgs Carton Size: 290 x 265 x 413mm Power Lead Length: 5MDry Bag Features: 30L capacity Waterproof PVC construction Heavy duty grab handles Front storage pocket Rear and side accessory netsSnow Foam Lance Features: Custom lance fits directly onto the top of your bottle of Muc-Off Nano Tech Bike Cleaner, Muc-Off Nano Gel Concentrate or 1L Snow Foam meaning no additional bottle is required to mix or dilute. Top Dial Adjusts level of foam concentration but adjusting the water flow rate and mixing with the cleaner in your bottle. Produces high quality, thick snow foam. Soft touch coated.Nano Tech Bike Cleaner Features: Safe on all parts and surfaces including carbon fibre Will not harm seals, cables, brake pads or rotors Safe on anodised metal Alkaline based and free from CFCs, solvents or acids Nano Tech Formula cleans on a molecular level BiodegradableNano Tech Concentrate Features: Quickly and safely cleans using Nano Technology 500ml pouch makes 2 litres of Muc-Off Nano Tech Bike Cleaner 5 Ltr carton makes 20 litres of Muc-Off Nano Tech Bike Cleaner Powerful degreaser in concentrate form Uses 89% less packaging that two 1 Ltr Muc-Off bottles BiodegradableBike Protect Features: High performance formula leaves dry, non-sticky protective film Safe on frame, metal parts, plastics, rubber, paint and carbon fibre Drives out excess moisture Prevents dirt adhesion Light lubricant coats moving parts Quick and easy to use 500ml Aerosol SprayMicrofibre Polishing Cloth Features: Split-fibre technology to increase absorbency and eliminate smears and blemishes Deep pile fabric that avoids the chance of swirling leading to damaged paintworkBuy Muc-Off Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Muc-Off High-Pressure Quick Dry Degreaser -750mlFormulated to keep your bike's drivetrain running smoother for longer, the High-Pressure Quick Dry Degreaser from Muc-Off enables you to deep clean your drivetrain when it is need of a service. This high-pressure degreaser can be blasted into hard-to-reach places and ensures better drivetrain cleaning, so when you dry your drivetrain and apply the lube of your choice, your bike will perform like new.Keep your chain and cassette cleaner than ever with our advanced High-Pressure Quick Drying Degreaser. It makes light work of oil build up, grease and grime, without the need for rinsing. Its unique dry 'zero residue' formula means that after cleaning, it evaporates to leave the area clean as a whistle, with no residue. It rips right through the toughest grime, including waterproof grease and chain lube. Features: High-pressure turbo spray Easily cuts through tough grease in seconds No rinse, heavy duty formula Can be used on chains, gears, mechs and individual components Works on the toughest waterproof grease and chain wax Can Size: 750mlBuy Muc-Off Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.