Muc-Off Bicycle Pressure Washer BundleThe Bicycle Pressure Washer Bundle features the Muc-Off Bike Pressure Washer and dry bag, a snow foam lance, Nano Tech bike cleaner, Nano Tech concentrate, Bike Protect spray and a microfibre polishing cloth. This bundle gives you outstanding bike cleaning performance to get your pride and joy cleaned, gleaming and shining like new.Fast and Deep Cleaning Bike Optimised Pressure WasherThe Muc-Off Pressure Washer Bicycle Bundle includes all you need to get your bike back to that factory fresh look while also looking out for those delicate bearings, surfaces and suspension parts. This 10-in-1 bundle features three lances to cater for specific cleaning needs, as well as a Snow Foam Lance to transform your bottle of Nano Tech Bike Cleaner into the ultimate dirt destroying snow foam. A waterproof Dry Bag is also included, as well as a 1L bottle of Nano Tech Concentrate, Bike Protect and Microfibre Cloth. All you need is a power source and water supply and you'll be able to give your pride and joy the ultimate deep clean it deserves! Nano Tech Bike CleanerKeep your bike clean no matter what the trail throws at you, thanks to the Nano Tech Bike Cleaner from Muc-Off. Featuring an exceptional cleaning composition, you can easily remove dirt, grime and grease from your bike, from even the muddiest of trails. Powerful and Fully Biodegradable Bike CleanerThis Muc-Off Nano Tech Bike Cleaner has incredible cleaning power because it breaks down dirt and grime on microscopic levels without harming your bike's delicate finish. This bike cleaner doesn't even need any nasty, dangerous acids or chemicals. Even better, the Muc-Off Nano Tech Bike Cleaner is fully biodegradable, free from acids, CFC's and solvents, and it's alkaline based so you can clean away with a guilt-free conscience. You can use the Nano Tech Bike Cleaner on all surfaces - it's even disc brake rotor and pad friendly, so there's no excuse for a dirty bike. Even in winter! Bike Protect Aerosol Light Lubricant SprayProtect your bike from the elements, with this Aerosol Spray Lubricant from Muc-Off. Design to distribute water to prevent corrosion after washing, it covers your frame in a non-sticky layer that safeguards your bike and helps prevent excess dirt and grim from sticking, for an easier cleaning experience after a day out tackling challenging trails. Pressure Washer Features: Motor Power: 1200W Volt/Freq: 220-240V~50/60Hz Motor Type: Carbon brush motor Rated Pressure: 70 bar Permissible Pressure: 100 bar Max. Inlet Water Pressure: 1.2 MPa Rated Flow: 5.5L/min Max. Flow: 6.5L/min Max. Water Temperature: 50°C Water Protection Class: IPX5 N.W. / G/W.: 5.5/6.2 kgs Carton Size: 290 x 265 x 413mm Power Lead Length: 5MDry Bag Features: 30L capacity Waterproof PVC construction Heavy duty grab handles Front storage pocket Rear and side accessory netsSnow Foam Lance Features: Custom lance fits directly onto the top of your bottle of Muc-Off Nano Tech Bike Cleaner, Muc-Off Nano Gel Concentrate or 1L Snow Foam meaning no additional bottle is required to mix or dilute. Top Dial Adjusts level of foam concentration but adjusting the water flow rate and mixing with the cleaner in your bottle. Produces high quality, thick snow foam. Soft touch coated.Nano Tech Bike Cleaner Features: Safe on all parts and surfaces including carbon fibre Will not harm seals, cables, brake pads or rotors Safe on anodised metal Alkaline based and free from CFCs, solvents or acids Nano Tech Formula cleans on a molecular level BiodegradableNano Tech Concentrate Features: Quickly and safely cleans using Nano Technology 500ml pouch makes 2 litres of Muc-Off Nano Tech Bike Cleaner 5 Ltr carton makes 20 litres of Muc-Off Nano Tech Bike Cleaner Powerful degreaser in concentrate form Uses 89% less packaging that two 1 Ltr Muc-Off bottles BiodegradableBike Protect Features: High performance formula leaves dry, non-sticky protective film Safe on frame, metal parts, plastics, rubber, paint and carbon fibre Drives out excess moisture Prevents dirt adhesion Light lubricant coats moving parts Quick and easy to use 500ml Aerosol SprayMicrofibre Polishing Cloth Features: Split-fibre technology to increase absorbency and eliminate smears and blemishes Deep pile fabric that avoids the chance of swirling leading to damaged paintworkBuy Muc-Off Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Muc-Off High-Pressure Quick Dry Degreaser -750mlFormulated to keep your bike's drivetrain running smoother for longer, the High-Pressure Quick Dry Degreaser from Muc-Off enables you to deep clean your drivetrain when it is need of a service. This high-pressure degreaser can be blasted into hard-to-reach places and ensures better drivetrain cleaning, so when you dry your drivetrain and apply the lube of your choice, your bike will perform like new.Keep your chain and cassette cleaner than ever with our advanced High-Pressure Quick Drying Degreaser. It makes light work of oil build up, grease and grime, without the need for rinsing. Its unique dry 'zero residue' formula means that after cleaning, it evaporates to leave the area clean as a whistle, with no residue. It rips right through the toughest grime, including waterproof grease and chain lube. Features: High-pressure turbo spray Easily cuts through tough grease in seconds No rinse, heavy duty formula Can be used on chains, gears, mechs and individual components Works on the toughest waterproof grease and chain wax Can Size: 750mlBuy Muc-Off Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: New high-pressure turbo spray, Large volume 750ml can,Easily cuts through tough grease in seconds,No rinse, heavy duty formula,Can be used on chains, gears, mechs and individual components,Safe to use on bicycles including E-Bikes,Works on the tough waterproof grease and chain wax.
Introducing the world’s first pressure washer built purely for use on both bicycles and motorcycles.We've designed and tooled three specific lances to ensure the Muc-Off Pressure Washer won't damage those all-important bearings and surfaces.As part of the kit, you'll get all three below. One for bicycles. Safe on bearing and suspension parts., One for motorcycles with a higher pressure, which is still safe on bearing and suspension parts.,One bespoke, adjustable pressure lance. Adjustable higher pressure for heavy grime on your tyres and anything else that you care about that needs cleaning with a bit more pressure.,Pressure Washer BagThe custom waterproof dry bag carry case is designed to easily store the Muc-Off Pressure Washer and keep available peripherals within easy reach and safe from tripping over in your garage! Snow Foam LanceTo go alongside the pressure washer, we’ve designed a specific low-pressure snow foam lance that won’t damage any delicate parts but transforms your bottle of Muc-Off Nano Tech Bike Cleaner into thick snow foam for the ultimate and efficient deep clean. Bicycle Bundle Includes: Pressure Washer,Pressure Washer Bag,Snow Foam Lance,1L Nano Tech Cleaner,1L Nano Tech Concentrate,Bike Protect,Microfibre Polishing Cloth,. Pressure Washer Features: Motor Power: 1200W,Volt/Freq: 220-240V~50/60Hz,Motor Type: Carbon brush motor,Rated Pressure: 70 bar,Permissible Pressure: 100 bar,Max. Inlet Water Pressure: 1.2 MPa,Rated Flow: 5.5L/min,Max. Flow: 6.5L/min,Max. Water Temperature: 50°C,Water Protection Class: IPX5,N.W. / G/W.: 5.5/6.2 kgs,Carton Size: 290 x 265 x 413mm,Power Lead Length: 5M,. Dry Bag Features: 30L capacity, Waterproof PVC construction, Heavy duty grab handles, Front storage pocket,Rear and side accessory nets,. Snow Foam Lance Features: Custom lance fits directly onto the top of your bottle of Muc-Off Nano Tech Bike Cleaner, Muc-Off Nano Gel Concentrate or 1L Snow Foam meaning no additional bottle is required to mix or dilute.,Top Dial Adjusts level of foam concentration but adjusting the water flow rate and mixing with the cleaner in your bottle.,Produces high quality, thick snow foam.,Soft touch coated.,. This unit is intended for use with cold water only! Do not use hot water in this pressure washer. Operate the pressure washer at no more than the fluid pressure rated for the pressure washer. Never run the pressure washer without a water supply. Running the unit without a water supply will cause irreparable damage to the unit., Make sure that the water supply you use for the pressure washer is not dirty, sandy, and does not hold any corrosive chemical products. Using a dirty water supply will compromise the long life of the pressure washer.,NEVER move the unit by pulling on the hose. Use the handle provided on the top of the unit., Important Safety Tips: Never point the pressure nozzle at people or animals.,Never drink alcohol or use drugs while operating the pressure washer.,Never operate the pressure washer while standing in water.,Never touch the electrical plug with wet hands.,Never let electrical connections rest in water.,Never operate pressure washer without the water turned on.,Never use hot water with this pressure washer.,. Important Safety Precautions: Read all instructions before using the product. Please keep all safety instructions.,Do not operate the pressure washer when fatigued or under the influence of alcohol or drugs.,Risk of injection or injury – do not direct the water stream at people or animals.,Do not allow children to operate the pressure washer at any time.,To reduce the risk of injury, please take extra care when the pressure washer is used near children.,Know how to stop the unit and reduce pressure immediately. Be completely familiar with the controls.,Stay alert – always be aware of where you are directing the spray.,Keep cleaning area clear of people.,Keep a good footing and balance at all times – do not overreach or stand on an unstable surface.,The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces.,Follow the maintenance instructions specified in this manual.,To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.,
Securely wrapping your calf in optimum support, the Nike Zoned Support Calf Sleeves apply compression to your muscles, enhancing circulation and bringing more oxygen to the area, reducing fatigue so you can train and perform for longer. Alongside these performance benefits, the anatomically correct design for your left and right calf deliver the ideal, lockdown fit, holding everything in place and preventing muscle vibration to reduce the chance of injury and wasted energy. Flatlock seams ensures these calf sleeves feel smooth against your skin, eliminating any chafing or irritation as you move, while a breathable construction and sweat-wicking fabric ensure the ideal climate by quickly drawing moisture away from your skin and allowing air to penetrate and regulate your temperature as your workout heats up. Finally, reflective details improve your visibility in low light so you remain safe and seen.
Nukeproof Digger Factory Alloy BikeEngineered to provide top-level agility, strength and style, the Nukeproof Digger Factory offers the versatility and adventuresome spirit of a gravel bike combined with a mountain bikes hardcore reliability and eagerness to ride tougher trails. The Digger Factory features a durable and lightweight alloy frame and a stiff and responsive carbon fork - this frameset ensures you experience agile and stable performance whether you're riding on tarmac or off-road trails.Nukeproof has also kitted it out with a Shimano GRX 1x11-Speed groupset, hydraulic disc brakes and a Brand-X dropper seatpost, while rolling fast upon DT Swiss G1800 Spline wheels wrapped in high-grip Schwalbe G-One BITE Tubeless Compatible tyres.What started during an intoxicated conversation some years ago, has ended up as a cult product in the Nukeproof range. Inspired by Nukeproof athletes and their desire for a do-it-all training bike with something a little extra; the Digger is a versatile vessel, blending “gravel bike” performance with the soul of a mountain bike. Be it commuting to work, gravel ride, overnight adventures rides, pub bike or doing some unimaginable riding like Elliot Heap in our Digger edits, wherever you aim the Digger it will go.Last updated in 2018, the Digger was due a refresh. The Gravel/Adventure category has evolved a lot over the last few years. Nukeproof wanted the V3 design to bring the Digger bang up to date with new features and geometry to make it even more versatile. The Digger was already a great bike, now even better taking the best ingredients from the V2 and evolving into the V3.Shimano GRX Groupset and DT Swiss Spline WheelsInstalled with top end dedicated gravel components, including DT Swiss GR 1800 wheels, Schwalbe G-One Bite tyres, Shimano GRX 810 groupset and brakes and a Brand-X dropper post for when the trail gets a bit spicey.Key Features: The all-new frame is manufactured from hydroformed 6061-T6 Triple Butted aluminium, light yet strong and stiff yet compliant in the right areas Lightweight high modulus T700 HM-UD carbon fork with a tapered steerer ensures compliance over rough terrain and lateral stiffness in the corners Shorter seat tubes designed for internally routed Dropper seatposts for ultimate confidence when the trails get technical User friendly internal cable routing with anti-rattle foam for a clean look Plenty of mud clearance and a rear triangle that allows up to 700cx45c” or 650bx47c tyres 1x Specific for modern gravel/adventure drive trains 12x100mm front and 12x142mm rear bolt through for stiffness Pannier Mounts for commuting or bringing your gear for overnight adventure rides Fender Mounts Gear accessory mount on top of top tube Threaded 68mm Bottom Bracket 3D Contoured Rubber frame protection for chain stay Max chainring size is 40T (38T Oval) Flat Mount Brake MountsFeatures: Frame: Nukeproof Digger V3 Road Plus and 700C compatible, custom triple butted hydro-formed Alloy, internal cable routing, threaded bottom bracket, 142mm x 12mm rear axle spacing Fork: Nukeproof Digger carbon, Road Plus and 700C compatible, Tapered Steerer, Rack Mounts, 12x100mm axle spacing Front Wheel: DT Swiss G1800 SPLINE 25, 700c, 12x100mm Rear Wheel: DT Swiss G1800 SPLINE 25, 700c, Shimano freehub, 142x12mm Tyres: Schwalbe G-One BITE, 700x45c, ADDIX Speed Grip, Tubeless Compatible Crankset: Shimano RX-810, GRX, 1x 11 Speed, 170mm, 40T Brakes/Shifter: Shimano GRX, RX-810 Levers with RX-810 Flatmount Callipers Rear Derailleur: Shimano GRX, RD-RX812, 11 Speed, Shadow Plus Chain: KMC X11 11-Speed, Anti-rust with Quick Link Cassette: Shimano CS-M8000 XT 11 Speed, 11-42T Front Rotor: Shimano RT800, 160mm Rear Rotor: Shimano RT800, 160mm Handlebars: Non-Series AL-6061, 31.8mm; XS/S/M/L:460mm; XL/XXL:500mm Stem: Nukeproof Horizon 60mm, 31.8mm Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 125mm drop, 31.6mm, Dropper lever integrated into GRX RX-810 Brake Lever Headset: Nukeproof Warhead Internal, IS42-28.6 / IS52/40 Bar Tape: Black Cork Cushion Tape with Gel Weight: 10.62kgKey Information: Fork Material: High Modulus T700 HM-UD Carbon Tapered Steerer Axle to Crown: 395mm Fork Offset: 48mm Wheels Size: 29"/700C Max Tyre Size: 700Cx45C/650Bx47C (700x40C with mudguards) Headtube: 42-52 Tapered Integrated Headset: IS42-28.6 / IS52/40 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Front Hub: 100x12mm Rear Axle: M12-142*P1.5*161L (Thread 15mm Long) Front Axle: M12*P1.5*120L (Thread 16mm Long) Brake Mount: Flat Mount disc Stem length: 60cm Max Chairing Size: 40T (Oval 38T) Protection: 3D Contoured Rubber Frame Protection for CSEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Digger Factory Alloy BikeEngineered to provide top-level agility, strength and style, the Nukeproof Digger Factory offers the versatility and adventuresome spirit of a gravel bike combined with a mountain bikes hardcore reliability and eagerness to ride tougher trails. The Digger Factory features a durable and lightweight alloy frame and a stiff and responsive carbon fork - this frameset ensures you experience agile and stable performance whether you're riding on tarmac or off-road trails.Nukeproof has also kitted it out with a Shimano GRX 1x11-Speed groupset, hydraulic disc brakes and a Brand-X dropper seatpost, while rolling fast upon DT Swiss G1800 Spline wheels wrapped in high-grip Schwalbe G-One BITE Tubeless Compatible tyres.What started during an intoxicated conversation some years ago, has ended up as a cult product in the Nukeproof range. Inspired by Nukeproof athletes and their desire for a do-it-all training bike with something a little extra; the Digger is a versatile vessel, blending “gravel bike” performance with the soul of a mountain bike. Be it commuting to work, gravel ride, overnight adventures rides, pub bike or doing some unimaginable riding like Elliot Heap in our Digger edits, wherever you aim the Digger it will go.Last updated in 2018, the Digger was due a refresh. The Gravel/Adventure category has evolved a lot over the last few years. Nukeproof wanted the V3 design to bring the Digger bang up to date with new features and geometry to make it even more versatile. The Digger was already a great bike, now even better taking the best ingredients from the V2 and evolving into the V3.Shimano GRX Groupset and DT Swiss Spline WheelsInstalled with top end dedicated gravel components, including DT Swiss GR 1800 wheels, Schwalbe G-One Bite tyres, Shimano GRX 810 groupset and brakes and a Brand-X dropper post for when the trail gets a bit spicey.Key Features: The all-new frame is manufactured from hydroformed 6061-T6 Triple Butted aluminium, light yet strong and stiff yet compliant in the right areas Lightweight high modulus T700 HM-UD carbon fork with a tapered steerer ensures compliance over rough terrain and lateral stiffness in the corners Shorter seat tubes designed for internally routed Dropper seatposts for ultimate confidence when the trails get technical User friendly internal cable routing with anti-rattle foam for a clean look Plenty of mud clearance and a rear triangle that allows up to 700cx45c” or 650bx47c tyres 1x Specific for modern gravel/adventure drive trains 12x100mm front and 12x142mm rear bolt through for stiffness Pannier Mounts for commuting or bringing your gear for overnight adventure rides Fender Mounts Gear accessory mount on top of top tube Threaded 68mm Bottom Bracket 3D Contoured Rubber frame protection for chain stay Max chainring size is 40T (38T Oval) Flat Mount Brake MountsFeatures: Frame: Nukeproof Digger V3 Road Plus and 700C compatible, custom triple butted hydro-formed Alloy, internal cable routing, threaded bottom bracket, 142mm x 12mm rear axle spacing Fork: Nukeproof Digger carbon, Road Plus and 700C compatible, Tapered Steerer, Rack Mounts, 12x100mm axle spacing Front Wheel: DT Swiss G1800 SPLINE 25, 700c, 12x100mm Rear Wheel: DT Swiss G1800 SPLINE 25, 700c, Shimano freehub, 142x12mm Tyres: Schwalbe G-One BITE, 700x45c, ADDIX Speed Grip, Tubeless Compatible Crankset: Shimano RX-810, GRX, 1x 11 Speed, 170mm, 40T Brakes/Shifter: Shimano GRX, RX-810 Levers with RX-810 Flatmount Callipers Rear Derailleur: Shimano GRX, RD-RX812, 11 Speed, Shadow Plus Chain: KMC X11 11-Speed, Anti-rust with Quick Link Cassette: Shimano CS-M8000 XT 11 Speed, 11-42T Front Rotor: Shimano RT800, 160mm Rear Rotor: Shimano RT800, 160mm Handlebars: Non-Series AL-6061, 31.8mm; XS/S/M/L:460mm; XL/XXL:500mm Stem: Nukeproof Horizon 60mm, 31.8mm Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 125mm drop, 31.6mm, Dropper lever integrated into GRX RX-810 Brake Lever Headset: Nukeproof Warhead Internal, IS42-28.6 / IS52/40 Bar Tape: Black Cork Cushion Tape with Gel Weight: 10.62kgKey Information: Fork Material: High Modulus T700 HM-UD Carbon Tapered Steerer Axle to Crown: 395mm Fork Offset: 48mm Wheels Size: 29"/700C Max Tyre Size: 700Cx45C/650Bx47C (700x40C with mudguards) Headtube: 42-52 Tapered Integrated Headset: IS42-28.6 / IS52/40 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Front Hub: 100x12mm Rear Axle: M12-142*P1.5*161L (Thread 15mm Long) Front Axle: M12*P1.5*120L (Thread 16mm Long) Brake Mount: Flat Mount disc Stem length: 60cm Max Chairing Size: 40T (Oval 38T) Protection: 3D Contoured Rubber Frame Protection for CSEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Digger Factory Alloy BikeEngineered to provide top-level agility, strength and style, the Nukeproof Digger Factory offers the versatility and adventuresome spirit of a gravel bike combined with a mountain bikes hardcore reliability and eagerness to ride tougher trails. The Digger Factory features a durable and lightweight alloy frame and a stiff and responsive carbon fork - this frameset ensures you experience agile and stable performance whether you're riding on tarmac or off-road trails.Nukeproof has also kitted it out with a Shimano GRX 1x11-Speed groupset, hydraulic disc brakes and a Brand-X dropper seatpost, while rolling fast upon DT Swiss G1800 Spline wheels wrapped in high-grip Schwalbe G-One BITE Tubeless Compatible tyres.What started during an intoxicated conversation some years ago, has ended up as a cult product in the Nukeproof range. Inspired by Nukeproof athletes and their desire for a do-it-all training bike with something a little extra; the Digger is a versatile vessel, blending “gravel bike” performance with the soul of a mountain bike. Be it commuting to work, gravel ride, overnight adventures rides, pub bike or doing some unimaginable riding like Elliot Heap in our Digger edits, wherever you aim the Digger it will go.Last updated in 2018, the Digger was due a refresh. The Gravel/Adventure category has evolved a lot over the last few years. Nukeproof wanted the V3 design to bring the Digger bang up to date with new features and geometry to make it even more versatile. The Digger was already a great bike, now even better taking the best ingredients from the V2 and evolving into the V3.Shimano GRX Groupset and DT Swiss Spline WheelsInstalled with top end dedicated gravel components, including DT Swiss GR 1800 wheels, Schwalbe G-One Bite tyres, Shimano GRX 810 groupset and brakes and a Brand-X dropper post for when the trail gets a bit spicey.Key Features: The all-new frame is manufactured from hydroformed 6061-T6 Triple Butted aluminium, light yet strong and stiff yet compliant in the right areas Lightweight high modulus T700 HM-UD carbon fork with a tapered steerer ensures compliance over rough terrain and lateral stiffness in the corners Shorter seat tubes designed for internally routed Dropper seatposts for ultimate confidence when the trails get technical User friendly internal cable routing with anti-rattle foam for a clean look Plenty of mud clearance and a rear triangle that allows up to 700cx45c” or 650bx47c tyres 1x Specific for modern gravel/adventure drive trains 12x100mm front and 12x142mm rear bolt through for stiffness Pannier Mounts for commuting or bringing your gear for overnight adventure rides Fender Mounts Gear accessory mount on top of top tube Threaded 68mm Bottom Bracket 3D Contoured Rubber frame protection for chain stay Max chainring size is 40T (38T Oval) Flat Mount Brake MountsFeatures: Frame: Nukeproof Digger V3 Road Plus and 700C compatible, custom triple butted hydro-formed Alloy, internal cable routing, threaded bottom bracket, 142mm x 12mm rear axle spacing Fork: Nukeproof Digger carbon, Road Plus and 700C compatible, Tapered Steerer, Rack Mounts, 12x100mm axle spacing Front Wheel: DT Swiss G1800 SPLINE 25, 700c, 12x100mm Rear Wheel: DT Swiss G1800 SPLINE 25, 700c, Shimano freehub, 142x12mm Tyres: Schwalbe G-One BITE, 700x45c, ADDIX Speed Grip, Tubeless Compatible Crankset: Shimano RX-810, GRX, 1x 11 Speed, 170mm, 40T Brakes/Shifter: Shimano GRX, RX-810 Levers with RX-810 Flatmount Callipers Rear Derailleur: Shimano GRX, RD-RX812, 11 Speed, Shadow Plus Chain: KMC X11 11-Speed, Anti-rust with Quick Link Cassette: Shimano CS-M8000 XT 11 Speed, 11-42T Front Rotor: Shimano RT800, 160mm Rear Rotor: Shimano RT800, 160mm Handlebars: Non-Series AL-6061, 31.8mm; XS/S/M/L:460mm; XL/XXL:500mm Stem: Nukeproof Horizon 60mm, 31.8mm Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 125mm drop, 31.6mm, Dropper lever integrated into GRX RX-810 Brake Lever Headset: Nukeproof Warhead Internal, IS42-28.6 / IS52/40 Bar Tape: Black Cork Cushion Tape with Gel Weight: 10.62kgKey Information: Fork Material: High Modulus T700 HM-UD Carbon Tapered Steerer Axle to Crown: 395mm Fork Offset: 48mm Wheels Size: 29"/700C Max Tyre Size: 700Cx45C/650Bx47C (700x40C with mudguards) Headtube: 42-52 Tapered Integrated Headset: IS42-28.6 / IS52/40 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Front Hub: 100x12mm Rear Axle: M12-142*P1.5*161L (Thread 15mm Long) Front Axle: M12*P1.5*120L (Thread 16mm Long) Brake Mount: Flat Mount disc Stem length: 60cm Max Chairing Size: 40T (Oval 38T) Protection: 3D Contoured Rubber Frame Protection for CSEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
OMM's Compressor Pod is a versatile and simple compression system that simply attaches to your pack and provides an additional 3 litres of storage on the go. This additional storage is ideal for quick grab items such as waterproofs and layers. The Compression cords of the Compressor Pod are designed to comfortably fit around all OMM packs, adding stability and storage as you move, without adding unnecessary weight.
An ideal addition to the Gear-Pack! The compression belts allow you to minimize the volume of your backpack so that you can move about as freely as possible on every adventure. Two compression straps with buckle and two with ladderlock buckle
Tow compression straps (width: 20mm) with buckle; two compression straps (width 20mm) with ladderlock buckle.
The Park Tool PP1 Hydraulic Brake Piston Press has a unique shape perfect for compressing the hydraulic piston by pushing the brake pads apart to speed up servicing and pad replacement. Slide the polished, wedge shaped tool between pads to expand the gap and pre-set the pistons into the caliper.