The Ekar bottom bracket is designed specifically for gravel and all road riding. Featuring a patented ProTech™ system with an external sealing ring and internal sleeve protects from water, grit and dirt ingress. Oversized, protected external stainless steel bearings attach directly to crank arms for a smooth, fluid performance. Technology: ProTech™ system: seals against dirt and moisture Oversized, protected external bearings: for smoothness
LifeLine Digital Pressure GaugeThe LifeLine Digital Pressure Gauge provides exceptional accuracy and hassle-free performance. Enabling to you achieve the perfect pressure rating for your tyres, it not only can give you an accurate pressure reading within 3 seconds, but is compatible with Presta and Schrader valves while also featuring a 'Bleed Valve' enabling you to fine-tune the inflation.Perfect Inflation PressureTo increase accuracy and functionality even further it features both 'Calculation Mode' enabling you to measure the inflation of the tyre and 'Adjustment Mode', which allows accurate pressure measurement as you use the bleed valve to achieve the perfect inflation value. Features: Max Pressure: 160 psi Valve Type: Presta & Schrader Pressure Adjustment: Bleed Valve Inflation Units: PSI, BAR, KPA, KG CM2 Display: LCD Backlit Power Saving: Auto Power-OffBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Silca Press-On Disc Wheel Pump AdaptorRaising the bar when it comes to working with the world's fastest wheels, the Press on Disc Adaptor Aluminium from Silca is the smallest and most compact disc chuck around.Premium Disc Wheel Inflation Manufactured from 6066-T6 aluminium, this American-made adaptor continues Silca's tradition of world-class and elite level inflation devices and accessories. Featuring a bright-red 252 Elastomeric Internal gasket and brand new CompressionHead design, the Press on Disc Adaptor Aluminium gives a tried and tested ultra-airtight seal. Measuring a massive blow-off pressure of 393psi, three times higher than its peers, this highly-durable and efficient adaptor is one tough chuck. Features: Material: 6066-T6 Aluminium Compatibility: Schrader, Presta (inflation only) Head Type: CompressionHead, able to tighten gasket over 200% by simply tightening cap Buy Silca Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stolen Compressor Fork Bolt KitThis bolt kit is machined from 6061 aluminium and will securely bolt your forks in place and unlike some models, it removes the risk of you stripping threads.Features: Material: CNC 6061 Aluminium Tooling: Tighten with a 6mm Allen wrench Suits 1 1/8" steerers Weight: 14gBuy Stolen BMX Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Pressure Relief Presta Valve Stem NutsThese valve stem nuts come as a pack of two and are specifically designed to ensure that an improper tubeless tape set-up doesn't result in a damaged rim. If the tubeless seal between your tyre's air chamber and the rim's cavity is breached, the rim's cavity can become pressurised resulting in a pressurised rim and potential delamination of the rim's sidewall. These pressure relief valve stem nuts prevent this from happening by creating an escape for the air via fluted reliefs on the inner diameter of the nut. Air escaping from these ports, indicates a compromised tubeless seal.Recommended for all tubeless ENVE SES wheelsets as well as other brand road tubeless wheelsets.Features: Use: Road Size: Comes as a pack of two Manufacturer's Part Numbers: EN7201012Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche X-Press Road and Track Bike WheelsetMiche has built its multi-use, single-speed X-Press wheelset with a 28mm rim height, a 32-hole spoke pattern and a rear hub that offers freewheel and fixed gear compatibility. Ideal for road riding and track racing, this strong and stiff wheelset will quickly get you up to speed when you put the power down.Stiff and Durable Racing WheelsBoth front and rear wheels have been constructed using the cross-laced spoke pattern to ensure stiffness, rigidity and durability. The 'stealth' black finish suits the distinctive street/urban riding style. Features: Rim Material: Aluminium Inner Rim Width: 15mm Rim Height: 28mm Tyre Compatibility: Clincher Tyre Width Compatibility: 700x24-28c Brake Type: Fine machined brake track for use with rim brakes only Speed: Single speed Fixed/Freewheel only (not compatible with multi-speed cassettes) Spoke Lacing: Cross Spokes: Stainless Steel (32 front & rear) Nipples: Brass / Silver Hubs Spacing: 9x100mm front / 10x120mm rear (bolt-on wheels) Quick Release: No, bolt-on axles Maximum Rider Weight: 120kg (bike and rider) Tubeless Compatible: No Wheelset Includes: Hub nuts, sprocket lock ring, use and maintenance instructions Weight: 2340g Buy Miche Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Home Mechanic Bearing Cup Press (HHP-3)Tough, durable and simple to use, the HHP-3 Bearing Cup Press can be used to install bike headset cups and press-fit bottom brackets. Park Tool has made it to be compatible with a wide range of sizes, making it the perfect addition to any amateur home mechanic's or busy shop mechanic's toolbox. As a manufacturer of bicycle specific tools since 1963, you can safely rely on Park Tools' many years of experience. The World's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the World.Features: Simple and economical, the HHP-3 is designed to install all sizes of head cups (1" to 1-1/2") and one-piece bottom bracket cupsWill also press BB30 and BB90 (BB86, or BB92) system cupsThe thread of the HHP-3 is 5/8" (16mm) diameter and will work to press BMX bottom brackets HHP-3 has a maximum working length of 385mm Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Press Fit BB Bearing Tool Set (BBT-90.3)Park Tool has established itself as the go-to brand for professional bike mechanics, and its BBT-90.3 bottom bracket fitting set is the ideal addition to any home or workshop toolbox. Compatible with a wide range of press-fit types, it’s designed to combine with Park Tool’s bearing press tool, to accurately insert or extract the bearing cups into the bike frames bottom bracket shell.Features: Compatibility: BB90, BB92, Shimano press-fit, SRAM press-fit GXP, Race Face press-fit and other press-fit bottom bracket systems Can be used with a Park Tool Bearing Press to press the bearings into the bottom bracket shellBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lifeline Press Fit BB InstallerThe LifeLine Press Fit Bottom Bracket Installer is equipped with precision machined bushes, which easily and accurately guide BB86, BB90 bottom bracket cups and BB30 bearings into Press Fit bottom bracket shells. It's the ideal addition to the toolbox of any committed home mechanic or bike workshop.Features:Essential tool for installing new Press Fit bottom brackets and replacing worn bearings Compatible with BB86, BB30 and BB90 Press Fit bottom bracket standards Precision bearing press bushings for accurate installation Ergonomic moulded handlesBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bearing Cup Press HHP-2A multi-purpose, quick-release device for fast and easy installation and removal, The Park Tool Bearing Cup Press HHP-2 offers fantastic leverage and accuracy when aligning and pressing headsets and cartridge cups in to place. Accurate and Efficient Pressing ToolThe ideal implement for aligning and pressing 1", 1 ⅛", 1 ¼", and 1.5" headset cups, this Park Tool press will also securely fit cartridge bearings and cups firmly in to one-piece bottom bracket shells. Featuring extra long handles for exceptional leverage when loosening and tightening and stepped bushings to ensure the perfect cup alignment is achieved, the HHP-2 can also be used for keeping fixed cup wrenches secure while your remove or install adjustable-type BBs. The Bearing Cup Press HHP-2 is a brilliant bit of kit for all of your pressing needs. Features: Compatibility: 1", 1⅛", 1¼", and 1.5" Headset Cups Maximum Working Length: 315 mm Inlcuded with Press: 530-2 Adaptors for Aligning 1" and 1-1/8" Pressed Headsets (Stepped At 25.7, 29.7, and 32.8 mm)Buy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lifeline Pro Bearing Press SetPerfect for home workshop use, this set features bearing gauges and adaptors that are specifically designed to suit all common bearing sizes used on bikes. It also comes with a pair of stainless-steel handles and a threaded axle for straightforward maintenance. In addition, all its bearing gauges and adaptors are made from 6061 aluminium for maximum durability and strength. Lifeline has also housed all of the set in a presentation case, so you can keep everything together and easily store it.The kit is supplied with pairs of gauges to work with the following bearing sizes: R6 6801 6900 608 6802 6901 6800 6803 6902 1728 6804 6903 1526 6805 6000 2437 6806 6001 In addition to the gauges above, this set is supplied with adaptors for installation of hub bearings where it is necessary to have the axle in place to install the last bearing. The additional adaptors/spacers are used to put over the axle, allowing you to safely press the bearing in by pressing against the hub shell without interference from the axle.OD-24mm adapter for 6802(15x24) and 6901(12x24)OD-26mm adapter for 6000(10x26), 6803(17x26) and 15267(15x26)OD-28mm adapter for 6001(12x28), 6902(15x28) and 17287(17x28)OD-30mm adapter for 6903(17x30)Additional spacers / Short x2 + Long x1Features: Bearing Gauges and Adaptors Material: 6061 Aluminium Handles Material: Stainless Steel Comes in a presentation case for easy storageBuy Lifeline Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Hydraulic Brake Piston Press PP-1.2Repair your hydraulic disc brake faster and with ease thanks to this Piston Press from Park Tool. This wedge can be inserted into a hydraulic disc brake caliper so you can pre-set the piston when performing component maintenance.The Park Tool PP-1 slides between the brake pads inside a caliper allowing the user to spread the pads and compress the pistons when servicing pads or wheels. The PP-1 expands the gap between the pads, making it easy to insert the disc between the pads when re-installing a caliper or wheel. "Sure-Grip" dual-density handle provides a positive grip.Features:Makes hydraulic disc brake maintenance and repair faster and easierForged steel construction with a plated finishComfortable rubber grip handleBuy Park Tool PP1 Brake Piston Press from Chain Reaction Cycles, the World's Largest Online Bike Store.