The Truvativ Powerspline bottom bracket will only fit Truvativ 12 spline chainsets. This bottom bracket is intended for road or trekking use.
The Truvativ Powerspline bottom bracket will only fit Truvativ 12 spline chainsets. This bottom bracket is intended for road or trekking use.
Designed to fit FSA's Power Drive cranks, this Power Drive bottom bracket uses a forged hollow cro-moly axle with sealed cartridge bearings in forged aluminium cups for smooth and stiff performance. With the addition of double snap seals for water and dirt protection this bottom bracket is built to last.Weight: 325g
Designed to fit FSA's Power Drive cranks, this Power Drive bottom bracket uses a forged hollow cro-moly axle with sealed cartridge bearings in forged aluminium cups for smooth and stiff performance. With the addition of double snap seals for water and dirt protection this bottom bracket is built to last.Weight: 325g
The Truvativ Powerspline bottom bracket will only fit Truvativ 12 spline chainsets. This bottom bracket is intended for road or trekking use.
Flowerpower is a performance wax-based lubricant using natural ingredients including a high sunflower seed wax content. It is an efficient way to lubricate bicycle chains yet harmless to the environment with its formula avoiding any fluorinated compounds (PFAS), graphene or sulphides.Effective and clean lubricant for chainsHarmless to the environmentStrong adhesion to metal - High sunflower seed wax content adheres to clean metalWater resistant formulaSuitable for road or off-road ridingLong lastingLow friction formulaStore and apply temperature range 5 - 35 ° C (41 - 95 ° F)Made in Italy100mlAfter treatment with Flowerpower lube, the chain will run quietly and more efficiently, giving more power to the rider. It will not attract dirt like oil-based lubes, so the life of the chain is extended. Flowerpower is a wax emulsion based in water, not alcohol. It has a high wax-to-water ratio exceeding 50%. Applied to a clean chain Flowerpower penetrates and coats the chain with a thick layer of wax which anchors to the metal as the water base evaporates. This leaves a long-lasting wax coating that is resistant to pedalling stresses and water from rain or the trail/road.It is recommended that about 4ml of Flowerpower lube is used on a clean chain. This will last approximately 300km in dry riding road conditions or 7,500km per 100ml bottle. Off-road or use in heavy rains are likely to require more frequent applications.
Your next power move starts at your pedals. Rally power meters are designed to seamlessly transfer between bikes to provide advanced cycling dynamics to help you ride more efficiently and improve over time. Rally dual sensing power meters (RK200, RS200 and XC200) measure total power, cadence, left/right balance and where in the pedal stroke you're applying power. What's more, the transferable spindle can be installed in the pedal body kits to keep cyclists riding year-round.Pedal Design: Features a sleek, pod-less design for improved cornering clearance and stack height for smarter ergonomicsSimple Installation: Installs like any other pedal for easy transfer from 1 bike to another - without bike shop assistancePerformance Metrics: Measures total power at +/-1% accuracy and cadence. Dual-sensing versions also measure left-right balance and advanced cycling dynamics to show how and where you're producing powerEcosystem: Fully integrates with the Garmin ecosystem to allow easy data analysis, software or settings updates via compatible Garmin watches, Edge cycling computers, and Garmin Connect. Leverage the power of Garmin Connect to receive training content and get your data where you want it for analysis on 3rd party platforms such as Strava, TrainingPeaks, and TrainerRoadTransferable Spindle: When the seasons change, you can transfer the spindle to Vector 3 or Rally RS/RK/XC pedal body kits (sold separately)Ant+ And Bluetooth Technology: Connect over ANT+ or Bluetooth to your supporting Garmin watch or Edge device. Also supports connections with your popular indoor training application like Zwift or TrainerRoadBattery Life: Up to 120 hours. Easily replaceable LR44/SR44 (x4) or CR1/3N (x2) batteryWeight: RS200: 320 g / RS100: 328 g / RK200: 326 g / RK100: 334 g / XC200: 444 g / XC100: 451 gStack Height: RS and RK: 12.2 mm / XC: 13.5 mmQ Factor: 53 mm (55 mm with supplied 2mm spacers)Cleat Type: RS: Shimano SPD-SL Rider Weight Limit: 105kg
Your next power move starts at your pedals. The Garmin Rally power meters are designed to seamlessly transfer between bikes to provide advanced cycling dynamics to help you ride more efficiently and improve over time. Rally dual sensing power meters (RK200, RS200 and XC200) measure total power, cadence, left/right balance and where in the pedal stroke you're applying power. What's more, the transferable spindle can be installed in the pedal body kits to keep cyclists riding year-round.Pedal Design: Features a sleek, pod-less design for improved cornering clearance and stack height for smarter ergonomicsSimple Installation: Installs like any other pedal for easy transfer from 1 bike to another - without bike shop assistancePerformance Metrics: Measures total power at +/-1% accuracy and cadence. Dual-sensing versions also measure left-right balance and advanced cycling dynamics to show how and where you're producing powerEcosystem: Fully integrates with the Garmin ecosystem to allow easy data analysis, software or settings updates via compatible Garmin watches, Edge cycling computers, and Garmin Connect. Leverage the power of Garmin Connect to receive training content and get your data where you want it for analysis on 3rd party platforms such as Strava, TrainingPeaks, and TrainerRoadTransferable Spindle: When the seasons change, you can transfer the spindle to Vector 3 or Rally RS/RK/XC pedal body kits (sold separately)Ant+ And Bluetooth Technology: Connect over ANT+ or Bluetooth to your supporting Garmin watch or Edge device. Also supports connections with your popular indoor training application like Zwift or TrainerRoadBattery Life: Up to 120 hours. Easily replaceable LR44/SR44 (x4) or CR1/3N (x2) batteryWeight: RS200: 320 g / RS100: 328 g / RK200: 326 g / RK100: 334 g / XC200: 444 g / XC100: 451 gStack Height: RS and RK: 12.2 mm / XC: 13.5 mmQ Factor: 53 mm (55 mm with supplied 2mm spacers)Cleat Type: XC: Shimano SPDRider Weight Limit: 105kg
Your next power move starts at your pedals. The Garmin Rally power meters are designed to seamlessly transfer between bikes to provide advanced cycling dynamics to help you ride more efficiently and improve over time. Rally dual sensing power meters (RK200, RS200 and XC200) measure total power, cadence, left/right balance and where in the pedal stroke you're applying power. What's more, the transferable spindle can be installed in the pedal body kits to keep cyclists riding year-round.Pedal Design: Features a sleek, pod-less design for improved cornering clearance and stack height for smarter ergonomicsSimple Installation: Installs like any other pedal for easy transfer from 1 bike to another - without bike shop assistancePerformance Metrics: Measures total power at +/-1% accuracy and cadenceEcosystem: Fully integrates with the Garmin ecosystem to allow easy data analysis, software or settings updates via compatible Garmin watches, Edge cycling computers, and Garmin Connect. Leverage the power of Garmin Connect to receive training content and get your data where you want it for analysis on 3rd party platforms such as Strava, TrainingPeaks, and TrainerRoadSingle-Sensing: RS100, RK100 and XC100 are the affordable power meter with options to upgrade to the dual-sensing system that provides cycling dynamicsTransferable Spindle: When the seasons change, you can transfer the spindle to Vector 3 or Rally RS/RK/XC pedal body kits (sold separately)Ant+ And Bluetooth Technology: Connect over ANT+ or Bluetooth to your supporting Garmin watch or Edge device. Also supports connections with your popular indoor training application like Zwift or TrainerRoadBattery Life: Up to 120 hours. Easily replaceable LR44/SR44 (x4) or CR1/3N (x2) batteryWeight: RS200: 320 g / RS100: 328 g / RK200: 326 g / RK100: 334 g / XC200: 444 g / XC100: 451 gStack Height: RS and RK: 12.2 mm / XC: 13.5 mmQ Factor: 53 mm (55 mm with supplied 2mm spacers)Cleat Type: XC: Shimano SPDRider Weight Limit: 105kg
Extend your ride with the Garmin Charge power pack. This external battery pack plugs directly in to the compatible Edge cycling computer, giving you up to 24 hours of additional battery life. It even fits into the new flush out-front bike mount (GMS56300).You can also charge on the go by connecting the Garmin Charge power pack to any compatible fitness device with an additional cable - including wearables and other cycling computers Just connect the power pack with a USB charging cable so you can stay in the action and get the most out of your activities. This power pack weighs 132g.Please note: Bike mount sold separately or included with the purchase of some Edge productsWearables with wrist-based heart rate that use a plug-based charger cannot be worn while chargingCompatible with:Battery Pack USB Adapter CableBattery Pack USB Adapter CableEdge 1000Edge 1000Edge 1030Edge 1030Edge 1030 PlusEdge 1030 PlusEdge 520Edge 520Edge 520 PlusEdge 520 PlusEdge 530Edge 530Edge 530 Mountain Bike BundleEdge 530 Mountain Bike BundleEdge 820Edge 820Edge 830Edge 830Edge 830 Mountain Bike BundleEdge 830 Mountain Bike BundleEdge ExploreEdge ExploreEdge Explore 820Edge Explore 820Forerunner 645Forerunner 645Forerunner 645 MusicForerunner 645 MusicForerunner 745Forerunner 745Forerunner 935Forerunner 935Forerunner 945Forerunner 945
Your next power move starts at your pedals. The Garmin Rally Power Meters are designed to seamlessly transfer between bikes to provide advanced cycling dynamics to help you ride more efficiently and improve over time. Rally dual sensing power meters (RK200, RS200 and XC200) measure total power, cadence, left/right balance and where in the pedal stroke you're applying power. What's more, the transferable spindle can be installed in the pedal body kits to keep cyclists riding year-round.Pedal Design: Features a sleek, pod-less design for improved cornering clearance and stack height for smarter ergonomicsSimple Installation: Installs like any other pedal for easy transfer from 1 bike to another - without bike shop assistancePerformance Metrics: Measures total power at +/-1% accuracy and cadenceEcosystem: Fully integrates with the Garmin ecosystem to allow easy data analysis, software or settings updates via compatible Garmin watches, Edge cycling computers, and Garmin Connect. Leverage the power of Garmin Connect to receive training content and get your data where you want it for analysis on 3rd party platforms such as Strava, TrainingPeaks, and TrainerRoadTransferable Spindle: When the seasons change, you can transfer the spindle to Vector 3 or Rally RS/RK/XC pedal body kits (sold separately)Ant+ and Bluetooth Technology: Connect over ANT+ or Bluetooth to your supporting Garmin watch or Edge device. Also supports connections with your popular indoor training application like Zwift or TrainerRoadBattery Life: Up to 120 hours. Easily replaceable LR44/SR44 (x4) or CR1/3N (x2) batteryWeight: RS200: 320 g / RS100: 328 g / RK200: 326 g / RK100: 334 g / XC200: 444 g / XC100: 451 gStack Height: RS and RK: 12.2 mm / XC: 13.5 mmQ Factor: 53 mm (55 mm with supplied 2mm spacers)Cleat Type: RK: Look Keo Rider Weight Limit: 105kg
External Di2 battery charger lead UK plug lead to be used in conjunction with SMBCR1 Di2 charger.