Building on the success of the original Ascend, Brand- X now offer an externally routed cable-operated option with the Ascend II. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing. It comes with an ergonomic lever that can be left or right hand mounted depending on your preference. The cable is actuated from the mid cap ensuring zero cable movement. The Ascend Dropper mechanical cable-operated seatpost sets new standards for reliability and performance at a fantastic price point. Please Note: The 27.2 option comes with the 2/3x Paddle Lever. The 27.2mm size also has a 2-piece saddle clamp so the saddle will sit slightly higher than on the 31.6 and 30.9mm options. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 390mm 105mm 90 128 31.6mm x 400mm 125mm 90 128 30.9mm x 400mm 125mm 90 128 31.6mm x 449mm 150mm 90 128 30.9mm x 449mm 150mm 90 128 Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.
The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Now available in both a 125mm and 150mm travel options, it allows riders to infinitely adjust their saddle height to suit the terrain ahead. Ergonomic Shifter-Style Dropper Remote The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that this dropper is ideally suited for those using a 1x chainring set up; without a front derailleur. However, a paddle style shifter is available separately for those who want to use the Ascend with a front derailleur and shifter. For installation, the seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. Please Note: This Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated - for externally routed bikes, please see the Ascend II 105/125mm/150mm travel version). Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide. Installation Guide Information Click here to view the Brand-X Ascend Internal Route Post Installation Guide.
Available with a selection of heights and offsets, this VIBE model maintains a stiff form to deal with the demands of powerful, fast-paced riding. Built using a 3D forged AL-2014 alloy, it is durable and dependable enough to be used all year round and in any weather. Attaching to your saddle using an innovative i-Bolt clamp, it also features strategically-placed cable ports to keep the wires from your Shimano Di2 shifting setup conveniently concealed. These features and its sturdy performance make this VIBE seatpost the ideal choice for the modern rider.
Fizik's Cyrano is everything you could ever want from a seatpost: simple, light and easy to use. It's crafted from aluminium for a fantastic blend of low weight, stiffness and durability. And, it features an internally ovalized cross-section to save precious grams and boost power transfer, a long lower plate to better support the seat rails and a short upper one with an angle-adjuster wheel to make adjustment easy. It is also compatible with both round and oval seat rails.
Ready for every mile of road, this seatpost comes equipped with a hard-wearing 6061 aluminium construction for an excellent combination of strength and durability on your road bike. Zipp has also kitted out this model with a 6061 aluminium clamp and steel hardware, so you can benefit from a tight and secure hold to your saddle rails whatever the conditions. Another highlight is its etched Zipp logo finishing, which gives it a sleek appearance to complement your ride. Adjustable Road Bike Seatpost Zipp’s Service Course seatpost is lightweight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro-adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure, low-profile clamp allows the saddle to slide farther back along the rails, and with this 20mm setback option, it’s possible for nearly any rider to achieve the perfect fit. For high strength, low weight, and efficient use of every gram, the shaft and head are not bonded but are 3D-forged from 6061 aluminium. The Service Course seatpost is 350mm in length. Technologies: - 2-bolt adjustability. - 3D-forged from 6061 aluminium. - Fits all common saddle rail types. - Lifetime manufacturer's warranty. Manufacturer's Part Numbers: ZP8048001 Silver 31.6mm x 350mm ZP8048000 Silver 27.2mm x 350mm
Ready for every mile of road, this seatpost comes equipped with a hard-wearing 6061 aluminium construction for an excellent combination of strength and durability on your road bike. Zipp has also kitted out this model with a 6061 aluminium clamp and steel hardware, so you can benefit from a tight and secure hold to your saddle rails whatever the conditions. Another highlight is its etched Zipp logo finishing, which gives it a sleek appearance to complement your ride. Adjustable Road Bike Seatpost Zipp’s Service Course seatpost is lightweight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro-adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure, low-profile clamp allows the saddle to slide farther back along the rails, and with this zero setback option, it’s possible for nearly any rider to achieve the perfect fit. For high strength, low weight, and efficient use of every gram, the shaft and head are not bonded but are 3D-forged from 6061 aluminium. The Service Course seatpost is 350mm in length. Technologies: - Two cosmetic options, bead-blast black or distinctive silver. - 2-bolt adjustability. - 3D-forged from 6061 aluminium. - Fits all common saddle rail types. - Lifetime manufacturer's warranty. Manufacturer's Part Number: ZP8049001 Silver 31.6mm x 350mm ZP8049000 Silver 27.2mm x 350mm
The patented LINK clamp on the Ritchey WCS 1-Bolt seatpost works with all standard saddle rail designs as well as Ritchey Vector Evo™ and Selle Italia MonoLink™ saddles with a separately sold adapter. Plus, this Ritchey WCS alloy seatpost has 20mm of offsets and a reversible clamp, which allows for an additional 10mm of fore-aft saddle adjustment.
Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo™ and Selle Italia MonoLink™ saddles with separate adapter. 20mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment.
Providing you with plenty of height to play with as you seek out your ideal riding spot, this durably-designed ITM seatpost gives a suitably stiff performance, however hard you ride. Featuring a 16mm offset and ITM's "Sit'n'Go" micro adjust head, subtle positional changes can be made to your saddle's angle to ensure the most comfortable sitting experience possible.
Whether you're exploring countryside gravel roads with your riding buddies or competing in an event, this seatpost is engineered for reliability and performance. It comes kitted out with an EA70 TaperWall alloy construction, which offers an excellent balance of stiffness and strength as you pedal across demanding mixed terrain conditions. Another highlight is its anodised finish that provides additional protection against corrosion, making it suitable for all weather conditions. Coming complete with a durable two-bolt integrated head and a zero offset, this is a perfect choice of upgrade for a comfortable and secure hold, wherever your next adventure takes you. Manufacturer's Part Number: EASP21EA7030-9X400X0MM2B Black 30.9mm x 400mm
With 350mm of length to play with, this Deda post lets you set your seat at your optimal height with ease. The zero offset allows you to take up a more forward-focused spot as you shoot for silverware. The two-bolt seat clamp lets you make simple and effective adjustments to your saddle angle, while the post also houses the Deda adapter for the internal battery used with DI5 shifting setups. A state-of-the-art post, this inline model is geared towards the modern, performance-focused rider.
3D Forged from 7050 aluminium, it boasts the same innovative 1-bolt clamping system as seen on Deda’s higher spec Superleggero model. This system allows for quick and easy assembly and easy saddle angle adjustments. It’s also ideal bikes with a Shimano Di2 drivetrain, as it is compatible with Deda’s internal adapter to hold a Di2 battery.