Ritchey Classic SeatpostOffering you the perfect balance of low weight and high strength, this Classic Seatpost from bike component experts Ritchey adopts the proven 2-bolt saddle rail clamp that’s highly adjustable. Assembled with a low-profile clamp, your saddle's rails will be under less stress, plus the clamp's carefully orientated bolts ensure an optimised clamping force. This means none of your pedalling efforts will be wasted, as there will not be any unwanted flex. Finished in a high-polished silver, it will enhance the looks of any classic or modern road bike.Features: Material: 3D Forged 2014 Alloy Finish: Hi-polish silver Length: 350mm Set Back: 25mm Suits Saddle Rail Sizes: Standard 7x7mm Rail Clamp Head Dimensions: 43x38mm Ritchey's "Classic" hi-polish silver finish Two-bolt design for easy to adjust, vice-like grip Low profile clamp reduces stress on lightweight rails and won't bottom out Bolts oriented to the axis of the rails for a greater contact area with the saddle Manufacturer's Part Number: 41075008001 Weight: 245g (27.2/350mm)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Link Seatpost ClampClamp adapter for WCS Alloy and/or WCS Carbon LINK SeatpostsFeatures: Converts for standard 2-rail saddle usage Offset: 5 or 25mm Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Vector Evo Seatpost ClampClamp adapter for WCS Alloy and/or WCS Carbon LINK Seatposts.Features: Converts for Ritchey Vector Evo saddle usage Offset: 15mm Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Carbon Bike SeatpostDesigned, constructed and extensively tested in the United Kingdom (UK), Hope has packed its very best construction techniques into its Carbon Bike Seatpost. It brings you the strength and performance needed to ride your bike at its limit. Lightweight and stiff enough for cross country (XC) racing and tough enough for riding aggressive downhill (DH) trails, it also has super-fine angle adjustment for obtaining the perfect saddle position.Each seat-post employs 24 individual "plies" of carbon, pre-impregnated with a highly toughened epoxy resin system, designed to ensure a safe and rugged unit. The bulk of the laminate comprises Unidirectional T700 fibre - the highest strength Standard Modulus fibre available. (Unidirectional fibres provide the maximum tensile strength and stiffness with minimum weight.) The strategically positioned plies of 3K twill woven fabric, add hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply also contributes in this respect, together with a super smooth finish and striking visual aesthetic.Features: Material: High strength Carbon Fibre with aircraft grade aluminium seat rail clamps Layback/Offset: 15mm Use: Road, Mountain Bike Smooth internal surface finish removes any unnecessary resin-rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on the Eternity Seatpost 100% designed, tested and manufactured in Barnoldswick, EnglandWeight: 27.2mm: 185g; 30.9mm and 31.6mm: 220gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Carbon Bike SeatpostDesigned, constructed and extensively tested in the United Kingdom (UK), Hope has packed its very best construction techniques into its Carbon Bike Seatpost. It brings you the strength and performance needed to ride your bike at its limit. Lightweight and stiff enough for cross country (XC) racing and tough enough for riding aggressive downhill (DH) trails, it also has super-fine angle adjustment for obtaining the perfect saddle position.Each seat-post employs 24 individual "plies" of carbon, pre-impregnated with a highly toughened epoxy resin system, designed to ensure a safe and rugged unit. The bulk of the laminate comprises Unidirectional T700 fibre - the highest strength Standard Modulus fibre available. (Unidirectional fibres provide the maximum tensile strength and stiffness with minimum weight.) The strategically positioned plies of 3K twill woven fabric, add hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply also contributes in this respect, together with a super smooth finish and striking visual aesthetic.Features: Material: High strength Carbon Fibre with aircraft grade aluminium seat rail clamps Layback/Offset: 15mm Use: Road, Mountain Bike Smooth internal surface finish removes any unnecessary resin-rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on the Eternity Seatpost 100% designed, tested and manufactured in Barnoldswick, EnglandWeight: 27.2mm: 185g; 30.9mm and 31.6mm: 220gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend Dropper Seatpost (100, 125 & 150)Precisely engineered to bring you fast and smooth operation on the trails, the Ascend dropper post will get you into the optimum riding position in a flash. This means you'll be primed for the upcoming terrain so you can attack a climb or descent without having to stop to change your saddle position. Designed for MTB frames with dropper post internal routing, it will give a clean look to your bike too.Ergonomic Dropper SeatpostThis mountain bike dropper seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. It's ideally suited for those running a 1x chainring transmission without a front derailleur.Your bike's frame must have internal dropper post routing for seamless compatibility with this dropper seatpost. To eliminate cable movement/pull, the smooth operating Brand-X Ascend 120mm & 150mm MTB Dropper Seatpost has been cable actuated at the end of the seatpost to deliver consistent performance.Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here.Reasons to Buy: Incredibly fast and smooth operation. Gives you an optimum riding position. Internal cable routing for a clean look. Effortlessly remote operated.Features: Material: AL7075-T651 Diameter: 30.9mm or 31.6mm Size: 410mm or 480mm Length/Travel: 100mm, 120mm or 150mm Cable Length: 1.5m Finish: Sand Blasted and Hard Anodised Black Warranty: 2 Years Compatibility: Frames with dropper post internal cable routing only Remote Included: Yes, bar mounted shifter style remote lever Infinitely adjustable Cable operated Internal routing only Linkage mechanism eliminates any outer cable pull Zero Offset Head type One Piece head/Upper Shaft Micro Adjust clamping mechanism Rider Weight: Min: 50-55kg; Max: 120kg Weight: 550g (without cable and shifter, 31.6mm)Please Note: The "Size" information relates to the seatpost's overall length. To know which size to buy, measure your current seatpost's length and diameterMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Manufacturer's Reference Codes: 120mm 31.6mm 410mm: BRNDXDRP01412316120; 120mm 30.9mm 410mm: BRNDXDRP01412309120; 150mm 31.6mm 480mm: BRNDXDRP01480316150; 150mm 30.9mm 480mm: BRNDXDRP01480309150; 125mm 30.9mm 412mm: BRNDXDRP0123412309125; 150mm 30.9mm 459mm: BRNDXDRP0123459309150; 125mm 31.6mm 412mm: BRNDXDRP0123412316125; 150mm 31.6mm 459mm: BRNDXDRP0123459316150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend Dropper Seatpost (100, 125 & 150)Precisely engineered to bring you fast and smooth operation on the trails, the Ascend dropper post will get you into the optimum riding position in a flash. This means you'll be primed for the upcoming terrain so you can attack a climb or descent without having to stop to change your saddle position. Designed for MTB frames with dropper post internal routing, it will give a clean look to your bike too.Ergonomic Dropper SeatpostThis mountain bike dropper seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. It's ideally suited for those running a 1x chainring transmission without a front derailleur.Your bike's frame must have internal dropper post routing for seamless compatibility with this dropper seatpost. To eliminate cable movement/pull, the smooth operating Brand-X Ascend 120mm & 150mm MTB Dropper Seatpost has been cable actuated at the end of the seatpost to deliver consistent performance.Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here.Reasons to Buy: Incredibly fast and smooth operation. Gives you an optimum riding position. Internal cable routing for a clean look. Effortlessly remote operated.Features: Material: AL7075-T651 Diameter: 30.9mm or 31.6mm Size: 410mm or 480mm Length/Travel: 100mm, 120mm or 150mm Cable Length: 1.5m Finish: Sand Blasted and Hard Anodised Black Warranty: 2 Years Compatibility: Frames with dropper post internal cable routing only Remote Included: Yes, bar mounted shifter style remote lever Infinitely adjustable Cable operated Internal routing only Linkage mechanism eliminates any outer cable pull Zero Offset Head type One Piece head/Upper Shaft Micro Adjust clamping mechanism Rider Weight: Min: 50-55kg; Max: 120kg Weight: 550g (without cable and shifter, 31.6mm)Please Note: The "Size" information relates to the seatpost's overall length. To know which size to buy, measure your current seatpost's length and diameterMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Manufacturer's Reference Codes: 120mm 31.6mm 410mm: BRNDXDRP01412316120; 120mm 30.9mm 410mm: BRNDXDRP01412309120; 150mm 31.6mm 480mm: BRNDXDRP01480316150; 150mm 30.9mm 480mm: BRNDXDRP01480309150; 125mm 30.9mm 412mm: BRNDXDRP0123412309125; 150mm 30.9mm 459mm: BRNDXDRP0123459309150; 125mm 31.6mm 412mm: BRNDXDRP0123412316125; 150mm 31.6mm 459mm: BRNDXDRP0123459316150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend Dropper Seatpost (100, 125 & 150)Precisely engineered to bring you fast and smooth operation on the trails, the Ascend dropper post will get you into the optimum riding position in a flash. This means you'll be primed for the upcoming terrain so you can attack a climb or descent without having to stop to change your saddle position. Designed for MTB frames with dropper post internal routing, it will give a clean look to your bike too.Ergonomic Dropper SeatpostThis mountain bike dropper seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. It's ideally suited for those running a 1x chainring transmission without a front derailleur.Your bike's frame must have internal dropper post routing for seamless compatibility with this dropper seatpost. To eliminate cable movement/pull, the smooth operating Brand-X Ascend 120mm & 150mm MTB Dropper Seatpost has been cable actuated at the end of the seatpost to deliver consistent performance.Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here.Reasons to Buy: Incredibly fast and smooth operation. Gives you an optimum riding position. Internal cable routing for a clean look. Effortlessly remote operated.Features: Material: AL7075-T651 Diameter: 30.9mm or 31.6mm Size: 410mm or 480mm Length/Travel: 100mm, 120mm or 150mm Cable Length: 1.5m Finish: Sand Blasted and Hard Anodised Black Warranty: 2 Years Compatibility: Frames with dropper post internal cable routing only Remote Included: Yes, bar mounted shifter style remote lever Infinitely adjustable Cable operated Internal routing only Linkage mechanism eliminates any outer cable pull Zero Offset Head type One Piece head/Upper Shaft Micro Adjust clamping mechanism Rider Weight: Min: 50-55kg; Max: 120kg Weight: 550g (without cable and shifter, 31.6mm)Please Note: The "Size" information relates to the seatpost's overall length. To know which size to buy, measure your current seatpost's length and diameterMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Manufacturer's Reference Codes: 120mm 31.6mm 410mm: BRNDXDRP01412316120; 120mm 30.9mm 410mm: BRNDXDRP01412309120; 150mm 31.6mm 480mm: BRNDXDRP01480316150; 150mm 30.9mm 480mm: BRNDXDRP01480309150; 125mm 30.9mm 412mm: BRNDXDRP0123412309125; 150mm 30.9mm 459mm: BRNDXDRP0123459309150; 125mm 31.6mm 412mm: BRNDXDRP0123412316125; 150mm 31.6mm 459mm: BRNDXDRP0123459316150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cinelli Vai SeatpostConstructed from durable 7075 aluminium, the Cinelli Vai Seatpost boasts a 2-bolt alloy clamp that means you can easily fix the angle of the saddle for an optimised riding position. Features:Use: Road, Mountain Bike (MTB)Material: Shaft: Aluminium 3D forged 7050 T6; Head: 6061 T6Length: 350mmDiameter: 27.2mm or 31.6mm optionsFinishing: PaintedOffset: 15mmWeight: 295gBuy Cinelli Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ITM Alcor Road SeatpostThe ITM Alcor road seatpost is made from lightweight yet strong 6061 alloy. It has a 2 piece clamp head that uses 2 bolts to provide maximum rigidity and security on the saddle rails. It also features ITM graphics that fit in well with the rest of the Alcor 80 line of components.Features: Material: 6061 Alloy Weight: 284g (27.2mm); 289g (30.9mm); 297g (31.6g)Buy ITM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ITM R Triango SeatpostThe ITM R Triango seatpost is made from lightweight yet strong 7075 alloy that has been wrapped in carbon fibre. It has a 2 piece clamp head that uses 2 bolts to provide maximum rigidity and security on the saddle rails. It also features ITM graphics that fit in well with the rest of the R Triango line of components.Features: Material: 7075 Carbon Wrapped Alloy Setback: 20 Weight: 268gBuy ITM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ITM X-One SeatpostThe X-One seatpost is made from carbon fibre with a 7075 alloy head. This makes the post incredibly lightweight. It features ITM's "Sit'N'Go" micro adjustment that allows a wide range of adjustments of the saddle, such as fore/aft and nose up/nose down. This will allow you to find the perfect fit. Features: Material: Carbon body with 7075 alloy head Setback: 16 Weight: 261gBuy ITM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.