The Allpine Light Eco cleaner is a deep-cleaning, highly efficient and biodegradable bike cleaner that is formulated using pine oil - this superb bike cleaner is ideal for quick cleaning without the need to rinse using water afterwards. With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its formula is very effective against dirt and does not require rinsing, making it ideal also for electric bikes (E-Bikes). Biodegradable Pine Oil Eco Bike Cleaner Allpine Light is harmless to the environment but very effective against dirt. After using it, you can get on a clean bicycle with a nice pine scent - a good way to start an epic ride. It is also ideal for E-Bikes since there is no need to rinse it away after cleaning. There are times when you are in a hurry and a quick cleaning is sufficient, or – especially for e-bikes - you want to limit the use of water close to electrical contacts. For these situations of moderate dirt, Allpine Light and a rag are enough to clean the bike, without the need to rinse with water. Use Without Rinsing: - Spray Allpine Light on a clean rag and wipe the entire frame - After cleaning, the surface will be shiny, with an anti-water and antistatic effect - As it does not contain silicone, it avoids that annoying sticky effect which is a real dust magnet. The surface thus treated also facilitates the flow of water - Note: Allpine Light does not remove the lubricant from the chain, so it is not necessary to relubricate it after such a cleaning - When the going gets tough, it doesn't hold back - If the bike is very dirty and / or muddy, you have to perform a serious cleaning Use With Rinsing: - Generously spray Allpine Light all over the bike - Wait a few minutes to let the product act - Rinse with plenty of water. A sponge or brush is recommended for an optimal result - Dry with a clean cloth. If needed, use more Allpine Light - without rinsing - to remove any streaks or traces of dirt - Lubricate the bicycle (chain, suspension, moving parts) after such a thorough cleaning
Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo™ and Selle Italia MonoLink™ saddles with separate adapter LINK Carbon Posts use FlexLogic carbon layup developed for ProTour team bikes from Stevens, Canyon and Scott – 15% more vertically compliant with no loss of lateral or torsional stiffness 15mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment
Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment. Precision forged alloy clamp assembly for strength with low-profile head for optimal saddle clearance and sleek lines. The wide saddle clamp reduces stress on lightweight saddle rails whilst the interchangeable clamp provides compatibility for all popular rail sizes.
Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo™ and Selle Italia MonoLink™ saddles with separate adapter. 20mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment.
The patented LINK clamp on the Ritchey WCS 1-Bolt seatpost works with all standard saddle rail designs as well as Ritchey Vector Evo™ and Selle Italia MonoLink™ saddles with a separately sold adapter. Plus, this Ritchey WCS alloy seatpost has 20mm of offsets and a reversible clamp, which allows for an additional 10mm of fore-aft saddle adjustment.
Clamp adapter for WCS Alloy and/or WCS Carbon LINK Seatposts
Clamp adapter for WCS Alloy and/or WCS Carbon LINK Seatposts.
With its simple design, the Seal BMX Progression Seat & Post Combo features a padded black vinyl seat attached to super strong, 200mm long steel seatpost.
Available in a range of colours to match your frame or components colour scheme, the Wolf Tooth bolt-on seatpost clamp has a self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.
Designed for simple and seamless drivetrain integration, this ShiftMount adaptor lets you mount your shifter to a specific brake type. This means that you'll benefit from more handlebar space thanks to this model's clever design that easily integrates your brakes and shifters for a clean look. Please note: There are multiple mounting options available for this product. Please select from the menu the mounting option that matches your set-up. Manufacturer's Part Numbers: SHF-MM-IS11 Black SRAM MM - I-Spec II WTSHF22ISII Black 22.2mm I-Spec II WTSHF22ISEV Black 22.2mm I-Spec EV WTSHFISEVMM Black I-Spec EV SRAM MM
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.
If you have a carbon rail saddle that will not fit into the clamping jaws of the original ZX-1 EVO seatpost, you will need a specific fitting kit. This kit allows the more oval shape of carbon rails to work with the ZX-1 EVO aero seatpost. Simply disassemble the hardware on top of the carbon seatpost and replace with the items supplied within this kit. This should allow you to fit 99% of carbon railed saddles on the market to your bike.