The race-proven transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, and notably reduced extended length - the new transfer post is ready to rise to any occasion. FEATURES Updated design., Patent-pending clamp design dramatically reduces stack height., Proven Transfer internals with even easier serviceability than 2020 model., Internal routing only., 30.9 and 31.6mm diameters - 100, 125, 150, and 175mm drop options., Reduced overall length and insertion depth:., 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction., 150mm, 38.7mm shorter, 15.5mm reduction., 125mm, 43.5mm shorter, 20.3mm reduction., 100mm, 48.4mm shorter, 25.2mm reduction.. 25g lighter than 2020 Transfer., 1x lever is Matchmaker and I-SPEC EV compatible (Sold Separately), Available in Kashima (Factory) and Black Anodized (Performance Elite)..
Uncompromising performance. The Float DPS helps you make perfect turns without cutting corners. The DPS' dual piston system pairs exceptional bump compliance with exceptional efficiency, helping conserve energy for when you need it most. FEATURES NEW graphics. ,NEW metric or trunnion-style remote shock offerings. ,DPS damper with three positions - Open, Medium, Firm modes. ,Dual Piston valve design improves both rebound and compression flow. ,Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. ,Factory Series models feature Genuine Kashima Coat..
Heavyweight features in a lightweight package. Designed specifically to meet the demands of aggressive trail riders, the new Float X combines sophisticated damping and fade free performance with incredible light weight and outstanding structural integrity. FEATURES ALL-NEW chassis and damper. ,High-flow main piston.,Air seal package. ,Volume spacers with smaller increments. ,MCU bottom out bumper.,Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. ,Independent firm mode circuit ÔÇô Clockable 2 position adjuster. ,Increased rebound adjuster range (over DPX2). ,Optimised reservoir lengths per shock size. ,Hydraulic top out feature. ,Reduced damper noise. ,Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. ,Bearing hardware compatible both sides.,Air valve location offers improved frame fitment and pump access..
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Black Anodized Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
The SL is 25% lighter than our standard transfer post, making it the lightest mainstream dropper on the market. With lever options for drop bars, flat bars, and 2x front shifters, it's the perfect upgrade for Gravel riders and diehard xc racers who want the Performance of a dropper but not the extra heft. Levers sold separately. Features: NEW lightweight design. NEW Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameters. 50, 70, 75, and 100mm drop options. 70-85deg seat angles are supported. 7mm and 7x9 ‘Ob-round' saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible.
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. “Factory” says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra durable Genuine Kashima Coat. These products are World Cup proven.
The SL is 25% lighter than our standard transfer post, making it the lightest mainstream dropper on the market. With lever options for drop bars, flat bars, and 2x front shifters, it's the perfect upgrade for Gravel riders and diehard xc racers who want the Performance of a dropper but not the extra heft. Levers sold separately. Features: NEW lightweight design. NEW Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameters. 50, 70, 75, and 100mm drop options. 70-85deg seat angles are supported. 7mm and 7x9 ‘Ob-round' saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible.
The race-proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, and notably reduced extended length ÔÇô the new transfer post is ready to rise to any occasion. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Kashima Coat Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Black Anodized Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
The race-proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, and notably reduced extended length ÔÇô the new transfer post is ready to rise to any occasion. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Kashima Coat Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
The SL is 25% lighter than our standard transfer post, making it the lightest mainstream dropper on the market. With lever options for drop bars, flat bars, and 2x front shifters, it's the perfect upgrade for Gravel riders and diehard xc racers who want the Performance of a dropper but not the extra heft. Levers sold separately. Features: NEW lightweight design. NEW Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameters. 50, 70, 75, and 100mm drop options. 70-85deg seat angles are supported. 7mm and 7x9 ‘Ob-round' saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible.
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. “Factory” says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra durable Genuine Kashima Coat. These products are World Cup proven.