Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Ride XC Mountain Bike SeatpostComing with the perfect length and construction for your epic trail rides and fast cross country (XC) racing, the Ride XC seatpost is the ideal upgrade for your mountain bike (MTB). Race Face has made it from a tough forged 6061 aluminium and heat-treated the tube for extra durability. The two-bolt head on this excellent value for money post offers you fine saddle angle adjustment so you can easily obtain your preferred riding position.Features: Material: Head: Forged from 6061 Aluminium; Post: 3D forged 6061 heat-treated aluminium tube Built for: XC/Trail Length: 350mm Seatpost head is strong & fatigue resistant Two-bolt design for easy adjustment while holding rails securely Low profile clamps reduce stress on light-weight rails Lightweight aluminium hardware Butted tube optimises strength to weight ratio & provides a strong tube at a reasonable weight Tube is anodised and shot-peened for increased fatigue life Weight: 295g (27.2mm)Buy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Ride XC Mountain Bike SeatpostComing with the perfect length and construction for your epic trail rides and fast cross country (XC) racing, the Ride XC seatpost is the ideal upgrade for your mountain bike (MTB). Race Face has made it from a tough forged 6061 aluminium and heat-treated the tube for extra durability. The two-bolt head on this excellent value for money post offers you fine saddle angle adjustment so you can easily obtain your preferred riding position.Features: Material: Head: Forged from 6061 Aluminium; Post: 3D forged 6061 heat-treated aluminium tube Built for: XC/Trail Length: 350mm Seatpost head is strong & fatigue resistant Two-bolt design for easy adjustment while holding rails securely Low profile clamps reduce stress on light-weight rails Lightweight aluminium hardware Butted tube optimises strength to weight ratio & provides a strong tube at a reasonable weight Tube is anodised and shot-peened for increased fatigue life Weight: 295g (27.2mm)Buy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:High spec entry level seatpost,2 bolt easy adjustment, low profile clamps,Lightweight aluminium hardware,Butted tube is strong yet lightweight,Forged 6061 heat treated aluminium tube.Specification:Built for XC/Trail,Length 375mm/350mm.Weight 295g (27.2mm).
The new Chester seat post is a durable, no nonsense post that can take on rock gardens and plenty of rough landings while still leaving bills in your pocket for aprés ride festivities.Key Features:Seat tube drawn from 6061 Alloy,Proven dual bolt, multi-adjustable head design.,Shot peened for high impact strength & fatigue resistance.,Length: 325mm,Weight: 231g (31.6),Material: 6061 .
The Chromag quick release seatpost clamp features a unique bushing that contacts the entire cam surface of your bike for smooth and strong action. This superb clamp combines a precision brass bushing and smooth lever for an enjoyable experience. The brass bushing is precision machined to press-fit perfectly into the collar and pair up with the lever cam. A custom Chromag 6mm bolt ensures reliability so you can stay at the top of your game.
Effetto Mariposa Mangiacatena Chain CleanerThe Mangiacatena Chain Cleaner from Effetto Mariposa is a durable, efficient and fast acting chain cleaning device that scrubs deep into chain links. This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains.If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle.Chain Cleaning with Minimum WasteThere is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvent is wasted without getting to a deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike.Please Note: Reducing the amount of solvent used doesn't mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside.Deep Cleaning FormulaThe chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively remove dirt on each side, pushing the solvent inside the chain.Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it's perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended keeping the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. At the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa have selected Mangiacatena materials and construction for a long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistanceFor Single-Speed Transmissions and 5 to 13 Speed ShainsThe chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.Features: The best way to clean the chain with minimum consumption of degreasing liquid The lamellar elements at both ends retain dirt and liquid inside Mangiacatena, while the six rotating brushes - continuously wet with degreaser - also act mechanically on the chain It can be used both on the lower and upper part of the chain, pedaling in both directions Degreasing liquid or water can be added from above, without the need to open Mangiacatena Made of shockproof and solvent resistant plastic. It can be refurbished with the appropriate replacement brush kit It works with single-speed transmissions (maximum chain width: 9 mm) and 5 to 13 speed chains Buy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stolen Hive BMX Seat and Thermalite SeatpostThis superb BMX combo combines two of the finest components Stolen has to offer for unrivalled support and comfort. The hive saddle features a large sized seat with an anti-slip side panel, so you can land comfortably and stay in control at all times. Additionally, its vegan leather cover with a hive patterned top makes it look as amazing as it performs while also allowing for brilliant grip and longevity.Thermalite BMX SeatpostFully-equipped for both park and street use, this brilliant combo includes a thermalite seatpost with 150mm of travel for amazing stability and composure. This is the ultimate choice of upgrade for half-pipe warriors who want two tough, high-performing components keeping you at the top of your game. Features: Material: Vegan Leather, hive pattern top Use: BMX Largest size seat pan Thickest padding Reinforced nose design Anti-slip side panel Ultimate grip and wear life Thermalite 150mm travel seatpost Weight: 411g (approx)Buy Stolen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Chester Mountain Bike SeatpostReady for whatever challenge you meet on the trail, the Chester Seatpost from Race Face has been designed to ensure a smooth landing when the terrain gets tough. Made from lightweight and durable 6061 alloy, it benefits from a shot-peened finish for ultimate strength and resistance. The ideal addition for all-mountain, downhill and free ride cycling. Features:Use: All-Mountain (AM)/Downhill (DH)/Free Ride (FR)Material: Seat tube drawn from 6061 AlloyProven dual bolt, multi-adjustable head design.Shot peened for high impact strength & fatigue resistance.Size: 30.9, 31.6mmDiameter: 27.2mm, 31.6mmLenght: 325mmWeight: 231g (31.6mm)Buy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
A handy rigid pouch that'll fit into that odd space behind your head tube for storing a CO2 tube and tools. Every hardtail and even the raddest of full-suspension bikes has an unused space behind the head tube that it's not using. We've commandeered that space on your behalf. Nothing to rattle against your seatpost and nothing for your tire to buzz on. Carry (nearly) anything. Hook and loop straps and daisy-chain loops let you fit the bag securely. A separate internal mesh pocket for your tube and loops for your CO2 keep the contents tidy. With a tube tool and air within reach and a bottle on your bike who needs a backpack? • Includes 6 hook-and-loop straps 7' and 10'
The ultimate layer piece! This hoodie can also be worn during sessions due to its lightweight and breathable design. A flattering fit mixed with added stretch for movement, this is the perfect hoodie. Fabric: 48% Cotton 46% Modal 6% Elastane