Thanks to the addition of microscopic silicate particles, Caffélatex now moves more slowly through holes, allowing the sealing ingredient more time to heal the puncture. These particles are NOT of macroscopic size (e.g., glitter 150-300 microns) but are instead microscopic particles less than 2 microns in diameter. Please read the MBUK's Six of the best guide to tyre sealants. Thus, Caffélatex flow characteristics change on a microscopic level without the headaches of valve-clogging glitter. Puncture repair speed is up to 5 times faster, an improvement especially noticeable with lightweight or thin-casing tyres. Recommended quantities: 30 to 50ml per wheel for road/cyclocross applications; 50ml for mtb tyres up to 26x2.10/29x2.00; 60 to 100ml for mtb tyres over 26x2.10/29x2.00.
When the damage size exceeds the maximum sealable by normal tyre sealants (around 5mm) and Caffélatex sealant escapes the hole without repairing it. ZOT! can be injected through the damage then the catalyzed Caffélatex will then be able to repair damages up to 10mm (well above the capacity of any liquid sealant). Caffelatex ZOT! Nano 10ml is the new improved formula of the original ZOT! 30ml. The Caffelatex specific catalyser is contained inside a small, flexible blister ending with a 1cm long x 1mm-diameter metal needle, activating Caffelatex (or Espresso) with surgical precision even on sensitive high-pressure tyres/tubulars. Instructions Caffélatex has to be liquid inside the tyre when the puncture occurs (ZOT! by itself has no sealing properties, it simply accelerates Caffélatex solidification). While ZOT! + Caffélatex can also work on tyre and inner tube setups, tubeless or tubeless-converted tyres are the easiest to work with. Tubulars with a tubular-tubeless construction (where the inner tube is integrated in the casing, like Tufos) are the easiest to work with. Inserting the tip of ZOT! bottle and squeezing it inside the tyre damage will instantly solidify Caffélatex, sealing holes. WARNING: simply pouring ZOT! on the outside of the tyre, won’t fix major damages. For maximum results, insert ZOT! bottle tip slightly inside the casing through the cut (to create a physical plug of solid Caffélatex inside the tyre). ZOT! solidifies Caffélatex locally, without compromising its normal lifespan inside the tyre. ZOT! has been engineered to work specifically with Caffélatex sealant formula.
Effetto Mariposa Caffelatex ZOT! Nano Tyre SealantCaffélatex Zot! is an instant polymerisation catalyser for Caffélatex, useful in cases of significant tyre damage such as when the damage size exceeds the maximum sealable by normal tyre sealants (around 5mm) and Caffélatex sealant escapes the hole without repairing it.Simply inject Zot! through the damaged area to solidify the Caffélatex inside and repair damages up to 10mm (well above the capacity of any liquid sealant).Caffélatex Zot! Nano 10ml is the Road/XC racer version of the original Zot! 30ml. The Caffélatex-specific catalyser is contained inside a small, flexible blister ending with a 1cm-long x 1mm-diameter metal needle, activating Caffélatex (or Espresso) with surgical precision even on sensitive high-pressure tyres/tubulars. Features: Instantly solidifies localised Caffélatex to mend tyre damage measuring 5-10mm in size Metal needle allows precise injection of Zot! into the site of small punctures Small, lightweight bottle contains enough to get you out of trouble Can be re-sealed with a practical silicone plug for further uses Fits under the bottle cage with special holding clip (supplied)Buy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Carbomove from Effetto Mariposa is a release spray, acting at the same time as penetrating oil and as powerful solvent. It s a great ally to free blocked components.Carbomove is very effective to free any blocked component of the bikeIt s the last resort to remove blocked aerodynamic seat-postsEasily cleans Carbogrip tracesDoesn t damage carbon composites or metalsWhen to use it: If the bicycle components have been mounted professionally, using Carbogrip or other specific assembly products, it's quite easy - for example - to modify the saddle height, even after some time. On the other hand, if the components have been assembled dry or not with the right products, repositioning or removing them can be a real challenge. There are ways to resolve the problem, but they all involve the use of brute force. Carbomove is a great help even in desperate cases, penetrating between the surfaces and facilitating their movement.Typical applications:Removal of a seat-postRemoval of threaded bottom bracketsRemoval of aerodynamic extensions from their clampsRemoval of traces of glue from the frame (vinyl stickers)Removal of CarbogripExample - Using Carbomove for a seized seat-post:Create a funnel by wrapping the seat tube with packing tape, leaving it open around the seized seat-postSpray abundantly Carbomove inside the funnel, in order to have the interface between seat-post and seat tube constantly moistenedLet it rest for a few hours. If needed, spray more Carbomove if neededCheck if the seat-post starts to move. If it s still stuck, repeat from #2The length of insertion of the seat-post into the bicycle frame heavily affects the duration (and success) of the operation: if the seat-post is inserted for more than 20 cm, the task becomes very difficult. It is sometimes useful to turn the bicycle upside down, remove the bottom bracket and spray Carbomove inside the frame from there.The worst case scenario is with aerodynamic seat-posts, whose section is not round. This means that their components cannot be twisted. In this case, Carbomove is the best and only option.
Tubular tyres can be a daunting, difficult and time-consuming proposition for a lot of riders. While clinchers are a comparative breeze to mount, tubulars require glue or less-effective taping in order to be safely mounted. Effetto Mariposa's Carogna Tubular Tape provides all the performance of glue, with the ease of tape.Extremely easy to use, making tubular tyres far quicker to fit safelyProvides excellent adhesion and is highly heat-resistant; perfect for road racingLeaves the rim ready for next gluing or taping when removed.Suitable for road or cyclocross use on carbon or aluminium rimsSize-specific for different rim widthsGluing tubular tyres and rims is both time-consuming and messy. With the need for the glue to set before mounting the tyre, realistically it can take days rather than minutes to safely mount them. This is where Effetto Mariposa's Carogna Tubular Tape provides a key advantage; it is incredibly easy and quick to use and offers incredibly secure adhesion to rival gluing. It also offers excellent heat-resistance, making it perfect for high-performance use where rim temperatures can soar. The tape also leaves no residue, so once removed the rim needs no additional cleaning before it is next glued or more tape is re-applied.Not only is Carogna Tubular Tape extremely easy to use, it is also suitable for both road and cyclocross use, with it being rated to extremely high and low-temperature use. Rim material is not a problem either, as the Carogna Tape is suitable for use with both aluminium and carbon rims. The tape comes in different sizes to suit different rim widths, with the Small width suitable for rims up to 20mm wide, Small/Medium suitable for 21-24mm rims and Medium suitable for the latest modern rims between 25 and 28mm wide. Easy to use and incredibly secure, no longer should you fear tubular tyres thanks to Effetto Mariposa's Carogna Tubular Tape.
Tubular tyres can be a daunting, difficult and time-consuming proposition for a lot of riders. While clinchers are a comparative breeze to mount, tubulars require glue or less-effective taping in order to be safely mounted. Effetto Mariposa's Carogna Tubular Tape provides all the performance of glue, with the ease of tape.Extremely easy to use, making tubular tyres far quicker to fit safelyProvides excellent adhesion and is highly heat-resistant; perfect for road racingLeaves the rim ready for next gluing or taping when removed.Suitable for road or cyclocross use on carbon or aluminium rimsSize-specific for different rim widthsGluing tubular tyres and rims is both time-consuming and messy. With the need for the glue to set before mounting the tyre, realistically it can take days rather than minutes to safely mount them. This is where Effetto Mariposa's Carogna Tubular Tape provides a key advantage; it is incredibly easy and quick to use and offers incredibly secure adhesion to rival gluing. It also offers excellent heat-resistance, making it perfect for high-performance use where rim temperatures can soar. The tape also leaves no residue, so once removed the rim needs no additional cleaning before it is next glued or more tape is re-applied.Not only is Carogna Tubular Tape extremely easy to use, it is also suitable for both road and cyclocross use, with it being rated to extremely high and low-temperature use. Rim material is not a problem either, as the Carogna Tape is suitable for use with both aluminium and carbon rims. The tape comes in different sizes to suit different rim widths, with the Small width suitable for rims up to 20mm wide, Small/Medium suitable for 21-24mm rims and Medium suitable for the latest modern rims between 25 and 28mm wide. Easy to use and incredibly secure, no longer should you fear tubular tyres thanks to Effetto Mariposa's Carogna Tubular Tape.
Tubular tyres can be a daunting, difficult and time-consuming proposition for a lot of riders. While clinchers are a comparative breeze to mount, tubulars require glue or less-effective taping in order to be safely mounted. Effetto Mariposa's Carogna Tubular Tape provides all the performance of glue, with the ease of tape.Extremely easy to use, making tubular tyres far quicker to fit safelyProvides excellent adhesion and is highly heat-resistant; perfect for road racingLeaves the rim ready for next gluing or taping when removed.Suitable for road or cyclocross use on carbon or aluminium rimsSize-specific for different rim widthsGluing tubular tyres and rims is both time-consuming and messy. With the need for the glue to set before mounting the tyre, realistically it can take days rather than minutes to safely mount them. This is where Effetto Mariposa's Carogna Tubular Tape provides a key advantage; it is incredibly easy and quick to use and offers incredibly secure adhesion to rival gluing. It also offers excellent heat-resistance, making it perfect for high-performance use where rim temperatures can soar. The tape also leaves no residue, so once removed the rim needs no additional cleaning before it is next glued or more tape is re-applied.Not only is Carogna Tubular Tape extremely easy to use, it is also suitable for both road and cyclocross use, with it being rated to extremely high and low-temperature use. Rim material is not a problem either, as the Carogna Tape is suitable for use with both aluminium and carbon rims. The tape comes in different sizes to suit different rim widths, with the Small width suitable for rims up to 20mm wide, Small/Medium suitable for 21-24mm rims and Medium suitable for the latest modern rims between 25 and 28mm wide. Easy to use and incredibly secure, no longer should you fear tubular tyres thanks to Effetto Mariposa's Carogna Tubular Tape.
Carogna double sided adhesive tape for Tubulars bridges the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance.• Extremely easy to use compared to mastic.• Very reliable adhesion, in any condition.• Once removed, Carogna leaves the rim ready for the next gluing, without additional cleaning.• Works for Road and Cyclocross.• Also available in very convenient Shop Rolls.Why We Created It:We started developing Carogna (pronounced “car-own-ya”) double sided adhesive Tubular Tape with a clear and ambitious goal: to bridge the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance, while retaining all the advantages of tapes.In addition to this, we gave specific additional consideration to Cyclocross and MTB Tubulars, where specific features are needed from the gluing standpoint.Universal Performance:Carogna has been tested and is designed to perform flawlessly on any rim material (Aluminium, Carbon), with any Tubular (seamless, handmade, vulcanized sew-ups…), on and off-road.Specific Adhesive Properties on Rim and Tubular:Two Application-Specific SidesSemi-structural and removable on the rim-side: adhesion is guaranteed by industrial-grade acrylic glue, native to the base tape; this means that when removing the Tubular (breaking its bond with the rim), the acrylic glue will stay on the tape, not on the rim. Acrylic has a good adhesion on both Aluminium and Carbon without any specific surface preparation.Permanent on the Tubular SideThere’s a 1 mm-thick layer of a recently-developed permanent glue for underwater applications. This thick glue film will move and spread when the Tubular is first inflated, ensuring optimized contact with any Tubular base tape geometry. Humidity is obviously not an issue, and this glue adheres well to any kind of base tape material (nylon, cotton, poly-cotton) or external finishing (raw, brushed, or coated by neoprene).Wide Temperature Range in UseOnce adhesion is set, the use at low temperatures (down to -40°C) is not a problem. Thermal resistance of all materials used in the manufacture of Carogna was a high priority: Carogna will provide a perfect bonding at 150°C for extended periods (hours), exceeding the heat-resistance of even the best mastics and widely exceeding the heat-resistance of any other tubular tapeOptimized Adhesive Surface:Adhesion is very strong and uniform across the whole circumference of the rim for all Tubulars and it is also uniform across the tubular base tape. One short-coming of tubular tape to-date has been limited adhesion at the edges of the base tape or in the centre of Tubulars with a raised centre seam. Carogna solves these problems.Temperature Range When MountingIdeal thermal range for application of Carogna is between 21°C and 38°C (70 to 100°F), allowing 8 hours to reach 80% of the adhesive strength . Applying the tape below 10°C is not recommended. We recommend cleaning surfaces (rim and tubular base tape) using iso-propylic alcohol or mineral spirits.
Carogna double sided adhesive tape for tubulars bridges the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance.Key Features:Extremely easy to use compared to mastic,Very reliable adhesion, in any condition,Once removed, Carogna leaves the rim ready for the next gluing, without additional cleaning,Works for road and cyclocross,Also available in very convenient Shop rolls.Why we created it:We started developing Carogna (pronounced “car-own-ya”) double sided adhesive tubular tape with a clear and ambitious goal: to bridge the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance, while retaining all the advantages of tapes.In addition to this, we gave specific additional consideration to cyclocross (read the specific how-to guide here!) and mountain-bike tubulars, where specific features are needed from the gluing standpoint.Universal performance:Carogna has been tested and is designed to perform flawlessly on any rim material (aluminum, carbon), with any tubular (seamless, handmade, vulcanized sew-ups…), on and off-road.The tape has two application-specific sides:Semi-structural and removable on the rim-side: adhesion is guaranteed by industrial-grade acrylic glue, native to the base tape; this means that when removing the tubular (breaking its bond with the rim), the acrylic glue will stay on the tape, not on the rim. Acrylic has a good adhesion on both aluminum and carbon without any specific surface preparation.Permanent on the tubular side: there’s a 1 mm-thick layer of a recently-developed permanent glue for underwater applications. This thick glue film will move and spread when the tubular is first inflated, ensuring optimized contact with any tubular base tape geometry. Humidity is obviously not an issue, and this glue adheres well to any kind of base tape material (nylon, cotton, poly-cotton) or external finishing (raw, brushed, or coated by neoprene).Wide temperature range in use:Once adhesion is set, the use at low temperatures (down to -40°C) is not a problem. Thermal resistance of all materials used in the manufacture of Carogna was a high priority: Carogna will provide a perfect bonding at 150°C for extended periods (hours), exceeding the heat-resistance of even the best mastics and widely exceeding the heat-resistance of any other tubular tape.Optimized adhesive surface:Adhesion is very strong and uniform across the whole circumference of the rim for all tubulars and it is also uniform across the tubular base tape. One short-coming of tubular tape to-date has been limited adhesion at the edges of the base tape or in the center of tubulars with a raised center seam. Carogna solves these problems.Temperature range when mounting :The ideal thermal range for application of Carogna is between 21°C and 38°C (70 to 100°F), allowing 8 hours to reach 80% of the adhesive strength . Applying the tape below 10°C is not recommended.We recommend cleaning surfaces (rim and tubular base tape) using iso-propylic alcool or mineral spirits.
Carogna double sided adhesive tape for tubulars bridges the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance.Key Features:Extremely easy to use compared to mastic,Very reliable adhesion, in any condition,Once removed, Carogna leaves the rim ready for the next gluing, without additional cleaning,Works for road and cyclocross,Also available in very convenient Shop rolls.Why we created it:We started developing Carogna (pronounced “car-own-ya”) double sided adhesive tubular tape with a clear and ambitious goal: to bridge the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance, while retaining all the advantages of tapes.In addition to this, we gave specific additional consideration to cyclocross (read the specific how-to guide here!) and mountain-bike tubulars, where specific features are needed from the gluing standpoint.Universal performance:Carogna has been tested and is designed to perform flawlessly on any rim material (aluminum, carbon), with any tubular (seamless, handmade, vulcanized sew-ups…), on and off-road.The tape has two application-specific sides:Semi-structural and removable on the rim-side: adhesion is guaranteed by industrial-grade acrylic glue, native to the base tape; this means that when removing the tubular (breaking its bond with the rim), the acrylic glue will stay on the tape, not on the rim. Acrylic has a good adhesion on both aluminum and carbon without any specific surface preparation.Permanent on the tubular side: there’s a 1 mm-thick layer of a recently-developed permanent glue for underwater applications. This thick glue film will move and spread when the tubular is first inflated, ensuring optimized contact with any tubular base tape geometry. Humidity is obviously not an issue, and this glue adheres well to any kind of base tape material (nylon, cotton, poly-cotton) or external finishing (raw, brushed, or coated by neoprene).Wide temperature range in use:Once adhesion is set, the use at low temperatures (down to -40°C) is not a problem. Thermal resistance of all materials used in the manufacture of Carogna was a high priority: Carogna will provide a perfect bonding at 150°C for extended periods (hours), exceeding the heat-resistance of even the best mastics and widely exceeding the heat-resistance of any other tubular tape.Optimized adhesive surface:Adhesion is very strong and uniform across the whole circumference of the rim for all tubulars and it is also uniform across the tubular base tape. One short-coming of tubular tape to-date has been limited adhesion at the edges of the base tape or in the center of tubulars with a raised center seam. Carogna solves these problems.Temperature range when mounting :The ideal thermal range for application of Carogna is between 21°C and 38°C (70 to 100°F), allowing 8 hours to reach 80% of the adhesive strength . Applying the tape below 10°C is not recommended.We recommend cleaning surfaces (rim and tubular base tape) using iso-propylic alcool or mineral spirits.
Effetto Mariposa Carogna SM Tubular Rim Tape Effetto started developing their Carogna (pronounced “car-own-ya”) double sided adhesive tubular tape with a clear and ambitious goal to bridge the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance, while retaining all the advantages of tapes.In addition to this, they gave specific additional consideration to cyclocross and mountain-bike tubular tyres, where specific features are needed from the gluing standpoint.The “SM” tape is for rims with external width between 21 and 24mm. Features: Extremely easy to use. Very reliable adhesion, in any condition. Once removed, Carogna leaves the rim ready for the next gluing, without additional cleaning. Universal performance: Carogna has been tested and is designed to perform flawlessly on any rim material (aluminium/carbon), with any tubular (seamless, handmade, vulcanised sew-ups…), on and off-road. Wide temperature range: Once adhesion is set, the use at low temperatures (down to -40°C) is not a problem. Thermal resistance of all materials used in the manufacture of Carogna was a high priority: Carogna will provide a perfect bonding at 150°C for extended periods (hours), exceeding the heat-resistance of even the best mastics and widely exceeding the heat-resistance of any other tubular tape. Optimised adhesive surface: Adhesion is very strong and uniform across the whole circumference of the rim for all tubulars and it is also uniform across the tubular base tape. One shortcoming of tubular tape to-date has been limited adhesion at the edges of the base tape or in the centre of tubulars with a raised centre seam. Carogna solves these problems. Optimal use: The ideal thermal range for application of Carogna is between 21°C and 38°C, allowing 8 hours to reach 80% of the adhesive strength. Applying the tape below 10°C is not recommended. Effetto recommend cleaning surfaces using iso-propylic alcohol. Buy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa Carogna SM Tubular Rim Tape Effetto started developing their Carogna (pronounced “car-own-ya”) double sided adhesive tubular tape with a clear and ambitious goal to bridge the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance, while retaining all the advantages of tapes.In addition to this, they gave specific additional consideration to cyclocross and mountain-bike tubular tyres, where specific features are needed from the gluing standpoint.The “SM” tape is for rims with external width between 21 and 24mm. Features: Extremely easy to use. Very reliable adhesion, in any condition. Once removed, Carogna leaves the rim ready for the next gluing, without additional cleaning. Universal performance: Carogna has been tested and is designed to perform flawlessly on any rim material (aluminium/carbon), with any tubular (seamless, handmade, vulcanised sew-ups…), on and off-road. Wide temperature range: Once adhesion is set, the use at low temperatures (down to -40°C) is not a problem. Thermal resistance of all materials used in the manufacture of Carogna was a high priority: Carogna will provide a perfect bonding at 150°C for extended periods (hours), exceeding the heat-resistance of even the best mastics and widely exceeding the heat-resistance of any other tubular tape. Optimised adhesive surface: Adhesion is very strong and uniform across the whole circumference of the rim for all tubulars and it is also uniform across the tubular base tape. One shortcoming of tubular tape to-date has been limited adhesion at the edges of the base tape or in the centre of tubulars with a raised centre seam. Carogna solves these problems. Optimal use: The ideal thermal range for application of Carogna is between 21°C and 38°C, allowing 8 hours to reach 80% of the adhesive strength. Applying the tape below 10°C is not recommended. Effetto recommend cleaning surfaces using iso-propylic alcohol. Buy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.