Hand built right here at Sourcebmx. This custom rear BMX wheel uses the tried and tested Profile Mini cassette hub in polished laced into a BSD NASA rim using high quality double butted rainbow spokes. NOTE: Please confirm the size of your driver at Checkout. Titanium driver and axle upgrades also available at checkout.###section### Product Specs WHEEL SIZE: 20" HUB: Profile Mini Cassette Hub AXLE: 14mm Male DRIVE SIDE: Left Side Drive RIM: BSD NASA Rim SPOKES: Double Butted Rainbow NIPPLES: Brass WEIGHT:
Dave Fisher, Profile’s head machinist, has created these limited edition, drilled out, Profile Mini Hubs. The Cats Eye Hubs have the same internals and hardware options as the Mini Hubs. Made in the USA, the Profile Mini hub features a low flange hub shell machined from heat treated 6061 aluminium spinning on two precision sealed bearings. The hub features a 7075 aluminium centre axle and steel capped cone washers to grip this hub in your forks better. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36 BEARINGS: Sealed WEIGHT: TBC
The Federal bottom bracket features high quality sealed bearings with alloy spacers featuring a laser etched Federal logo.
Mid BB kit from Stay Strong. This Kit includes 2 Sealed bearings, CNC'd anodized spacers with Stay Strong logo, centre tube spacer & multiple adjustment axle washers for precise crank installation. Available in sizes to fit all common cranks, 19, 22 & 24mm axle diameters.
Custom beveled 5-spoke design provides both looks and strength. CNC machined from 7075 alloy. Offset 1/8” teeth provides improved chain alignment ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
S&M have been hard at work revising their original race stem, keeping the geometry and feel the same but shedding weight from unnecessary material. A two piece clamp has been added in place of the traditional faceplate style to further strip weight without sacrificing bar security. Made in the USA from CNC machined 6061 aluminium and available in 4 different reach options. ###section### Product Specs TYPE: 22.2mm REACH: 49, 53 or 57mm RISE: 23.5mm CLAMPING DIAMETER: Top Load WEIGHT: 289g (10.2oz)
The Wethepeople Hydra Stem is as much of a beast as the one it was named after. Made from fully CNC machined 6061-T6 alloy that's strong and durable at a really good weight. Machining in key areas helps keep the weight down and gives the Hydra its distinct and clean design. The Hydra utilises Wethepeople's patented STC (Shark Tooth Clamping) technology, which features fine micro-knurling across the faceplate clamping area that allows the stem to "bite" into the knurling on the handlebars to create a much stronger grip. As well as their STC technology the Hydra features a wider 48mm cap to improve clamping as well as larger head bolts for improved clamping power. Please note: This is the Oversized version of the Wethepeople Hydra Stem to fit 25.4mm handlebars. ###section### Product Specs TYPE: 25.4mm REACH: 50mm RISE: 30mm CLAMPING DIAMETER: Top Load WEIGHT: 336g (11.85oz)
The Stay Strong V1 Pro Race Stem is built from fully machined alloy for the perfect balance between strength, durability and weight. Heat-treated M6 bolts and 31mm CNC'd compression bolt recess. CNC machined Stay Strong logos on the sides complete the stem. ###section### Product Specs TYPE: 22.2mm REACH: 35-45mm RISE: TBC CLAMPING DIAMETER: Top Load WEIGHT: TBC
All new Drain Man sprocket from S&M, Made from CNC'd 6061 Aluminum in USA .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 79g / 2.8oz
Fully CNC machined 7075 Alloy, 4mm Thick 4 Bolt design. CNC'd Stay Strong logo with a CNC'd bolt recess. BCD 104 ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 78g
Retro Old School sprocket from S&M. Made in USA from CNC machined 7075 T6 Aluminum. 1/8″ teeth, 15/16″ (24mm) center bore. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 3.5oz - 7.5oz
The Enduro V2 is a strong, clean-looking top load stem with 34mm rise and a fork top cap counter bore. Features include a thick single cap and less external machining than its predecessor. Internal machining to keep the weight down and two engraved Sharpie Shield logos round out the new, taller version of this popular dirt and street stem. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs TYPE: Top Load REACH: 40, 49 or 52mm RISE: 34mm CLAMPING DIAMETER: 22.2mm WEIGHT: 331g