Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
The HUSKE from Seasucker (Hub Standards Keep Evolving) is a universal fork mount system that handles the most common fork mount standards of yesterday, today, and tomorrow. Interchangeable plugs fit into an anodized aluminium extrusion (sold separately) and are moulded from super-durable glass-filled nylon. HUSKE Plugs are sold in pairs.Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon. Moulded; high-strength durable plastic.
The HUSKE from Seasucker (Hub Standards Keep Evolving) is a universal fork mount system that handles the most common fork mount standards of yesterday, today, and tomorrow. Interchangeable plugs fit into an anodized aluminium extrusion (sold separately) and are moulded from super-durable glass-filled nylon. HUSKE Plugs are sold in pairs.Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon. Moulded; high-strength durable plastic.
The HUSKE from Seasucker (Hub Standards Keep Evolving) is a universal fork mount system that handles the most common fork mount standards of yesterday, today, and tomorrow. Interchangeable plugs fit into an anodized aluminium extrusion (sold separately) and are moulded from super-durable glass-filled nylon. HUSKE Plugs are sold in pairs.Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon. Moulded; high-strength durable plastic.
The HUSKE from Seasucker (Hub Standards Keep Evolving) is a universal fork mount system that handles the most common fork mount standards of yesterday, today, and tomorrow. Interchangeable plugs fit into an anodized aluminium extrusion (sold separately) and are moulded from super-durable glass-filled nylon. HUSKE Plugs are sold in pairs.Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon. Moulded; high-strength durable plastic.
The DynaPlugger is a simple, rugged, rad way to repair your tubeless tyre. Just find the puncture, align the tool, push into puncture, pull out and the plug stays in place. Now you're ready to get back to shredding! The DynaPlugger is a fast, dependable and lightweight tubeless repair kit, never leave home without it!No need to remove the tyre, no messy glues or solvents, just plug and rideIf a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there!A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationWhen not in use, the DynaPlugger is a pack-friendly 127 mm long and weighs just 34 grams, less than an energy gelPush fit cap ensures fast deployment when required and a spare pre-loaded insertion tube can be kept in the handleKit includes the durable glass-filled nylon tool, 4 x soft nose plugs, 2 stainless steel insertion tubes and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageDynaPlug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the insertion tube straight into the hole and extract the tool, depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the non-abrasive brass tip will not scratch your rim or puncture your rim tape. DynaPlugger is a moulded of Glass-Filled Nylon. Even though it weighs only 35 grams, this tool is extremely strong. The push-on silicone end cap can store an extra insertion tube and seals the interior storage compartment.
Top up your puncture repair kit with these Birzman Tubeless Repair Kit Tyre Plugs. This is a supplement pack containing 5 x 5 sets and is ideally used with the Birzman Tubeless Repair Kit insertion tool / cleaning file.This product is intended for emergency repairs onlyFor use with punctures no larger than 3mm on tubeless bicycle tyresThe effectiveness of each repair depends on the nature of puncture and condition of the tyre
A tough genuine Shimano tool. The FC15 Octalink Chainset Plug Tool allows for the removal of Shimano Octalink chainsets with the standard Shimano crank extractor.
The Knog Plug Twinpack Light Set is for every rider looking for a bright, easy to attach light set, with incredible visibility from a range of angles.Versatile, easy to use light set with 5 modes: Max, Medium, Pulse, Flash & Eco-FlashUSB rechargeable Lithium Polymer battery provides up to 240/100 hours of run time in Eco-Flash mode (front/rear)Single LED provides a powerful beam, while cutouts in the body and domed rear lens improve side visibilityDurable design is 100% waterproof against the elementsInterchangeable straps for both lights for different handlebar/frame/seatpost shapesBoth Plug lights use an overmolded TPU construction and are packed with technology, such as cutouts in the body o n the front light and domed lens on the rear for improved side visibility. Even with all of the light being dispersed by the Plug, riders don't need to sweat the battery life - with up to 240 hours for the front and 100 hours run-time for the rear on eco-flash mode. Designed to work with all genres of bicycles from commuters to aero road bikes, both Plugs comes with different silicone bands for securing it to handlebars, frame or seatpost. If you want a versatile, easy to use light set, the Knog Plug Twinpack is a great choice!
The BBB screw-on bar plugs provide a secure hold to all handlebar tapes when tightened up. They will keep your bar tape looking neat and professional, are easy to remove and insert and can be used over and over again. Supplied with 2 plugs, enough for 1 handlebar.
The BBB Bar End Plugs will help keep your bar tape looking neat, tidy, and secure. Supplied with 2 plugs, enough for 1 handlebar.
The BBB Bar End Plugs will help keep your bar tape looking neat, tidy, and secure. Supplied with 2 plugs, enough for 1 handlebar.