A chain tool that is small enough to go anywhere, yet which performs like a full size workshop toolFine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivetsIncludes a loosening shelf to release stiff links after assemblyReplaceable driving pin headWorks on most bicycle chains, including 10-speedWeighs just 77 grams
This P-handled hex wrench will fit your hand as well as the task it's designed forThe high strength nylon handle has an ergonomic shape to give maximum grip and comfortThe long shaft is fitted with a genuine Bondhus balldriver for those hard to reach bolt headsThe short end of the wrench is conveniently mounted into the handle for any high torque applicationsBondhus Protanium high torque industrial steel is used for long life
TRUVATIV BOTTOM BRACKET TOOL ISIS DRIVE Truvativ Bottom Bracket Tool ISIS Drive
Key Features:Want to be covered no matter what happens or just really, really hate walking home? The Megapill is for all the truly prepared boy and girl scouts out there,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,If a single plug is not enough to seal a hole, just fold the -ætail-Æ flat on the tyre; hold it with your finger and stick another one in there!,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,The Megapill is a perfectly machined, waterproof 6061 aluminum capsule that contains everything you need for epic rides in the middle of nowhere, including a grand total of 7 pre-loaded Dynaplug insertion tubes and a micro knife for cutting the plug tail,Even as the big boy of the Dynaplug range, the Megapill is only 65 x 28 mm in size and weighs just 85 grams fully loaded,Kit includes the tool, 5 x standard and 2 x Megaplug compatible stainless steel insertion tubes 5 x Soft nose standard plugs, 2 x Megaplugs, 1 x micro knife, a handy carry pouch and a pipe cleaner to help prep the tubes for reloading,Made with pride in the USA with patented technology and warrantied for life under normal usage.
Key Features: Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners,Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminium handle hard anodized to take the rigours of everyday use.
Key Features: Made from a carefully selected combination of Chrome Vanadium and S-2 tool steels,Unique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortless,Machined, chamfered tips allow easier insertion into hex fittings,Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy,Sliding T-handle creates increased leverage and multiple access positions.
Key Features: Made from a carefully selected combination of Chrome Vanadium and S-2 tool steels, Featuring an unique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortless,Sliding T-handle creates increased leverage and multiple access positions.
Key Features: The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups and adaptors,The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact,Also included are eight installation drifts for pressing bearings into pre-installed cups,Organized in a convenient storage case,Full list of compatible bearing inner/outer diameters found on instructions/parts diagram,NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for useMade in the USA and covered by Park Tool's legendary limited lifetime warranty.
The Talon is a brand new tyre lever and quick-link tool. It’s super light at just 40g, small enough to strap to your frame or stash in a pocket and tough enough to go the distance. The tool works with 9 to 12-speed quick-links and chains.The Talon’s two pieces clip together to form a neat tool for breaking and fixing quick-links on chains. It pairs super-strong fibre-reinforced nylon levers and stainless-steel tips. There’s also room to store a spare quick-link so you’re never left in a jam.Unclip the Talon and you’ve got two sturdy tyre levers to help fix those annoying punctures on the trails. It’s tough enough for all but the stiffest of tyres but, thanks to the nylon material, won’t ruin those expensive carbon rims.Dimension: 8(H) x 19(W) x 130(L)mm / 2pc,Weight: 40g / 2pcs.
Having the right tool for the job is essential when working on bicycles and the cone wrench is a perfect example of this as it is simply the only tool available for adjusting many hubs on the market. Pedro's cone wrenches provide professional quality, precision fit wrenches required to properly install, remove, and adjust hubs. Pedro's cone wrenches are made from 2mm thick, precision laser cut, heat-treated tool steel for the ultimate in strength and long-lasting performance and are commonly revered for outlasting many other "shop" quality cones wrenches. Pedro's designed each cone wrench to fit perfectly protecting the hub and ensuring simple and safe usage for the mechanic. Each ergonomically designed flat wrench also features a single-ended design with cushioned grip to provide maximum leverage & comfort. Pedro's cone wrenches are available in 13, 14, 15, 16, 17, 18, 19, and 20mm sizes.
Key Features:For Shimano MF compatible freewheels.Cr-V steel construction.Also for Campagnolo cassettes and BBs (Record, Chorus, and Athena)..For use with 0.5 inch driver and 21mm spanner..
Key Features:Thumb lock to hold the cable tight for one hand operation.Steel construction.
Key Features: Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners,Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminium handle hard anodized to take the rigours of everyday use.
Carry bag for PRS20 and PRS21 workstandIdeal for storing workstand when not in use
Key Features: 6mm Tool clip (bag of 5),Fits workshop toolboard QKBTB or QKSTB,Zinc plated,Safety end caps,Perfolock.
Hydraulic Olive, Shroud and Barb Kit - 18 Types Covering all major brands.A workshop box of olives, barbs and shrouds for hydraulic hoses manufactured to OE spec,Rubber dust cover for brake lever end,Alloy micro shims,Copper oil seal,M8 x 1.0 threaded shroud, 5mm olive and 2.1mm barb for Formula Mega & The O.
A workshop box of various M5 bolts designed for the riguors of flat mount caliper mounting,All bolts are high impact black with nylok coating and exceed 95kgf-cm tests,M5 x 12mm,M5 x 23mm,M5 x 28mm,M5 x 33mm,M5 x 38mm,M5 x 43mm,M5 x 48mm.
BB mounted bike standHolds your bike easily and securely via open end of chainset axleLightweight and foldable design makes it perfect for travelling or when space is at a premium
5-8 Speed: The workshop quality chain whip on this sprocket remover gives great leverage without the risk of slipping. It has been heat-treated to prevent bending and flexing and features a long handle for extra leverage. 9 & 10 Speed: The Cyclo Tools Sprocket Remover is heat-treated to prevent bending and flexing. With a dipped plastic handle for comfort and an extra leverage long handle, this is an advanced tool used by the professionals.
Cr-V hex key.Key Features:Made with Cr-V Steel.Provided with coating for easier grip.