The Saltplus Pitch Slick Tyre offers modern street riding performance without compromising on grind snagging. Made from a high-quality rubber compound with an exclusive modern super slick design and smooth tread pattern it's the perfect tyre for grinding and sliding. The Pitch Slick Tyre is available in a 2.25" and 2.35" width. Max pressure rating: 65 psi ###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 65 PSI WEIGHT: 793g (27.9oz) PACK SIZE: Single
SKS COMPIT Stem Smartphone MountThe SKS COMPIT Stem mount is a secure and stylish smartphone mount that holds your smartphone on the top of your bike's stem.The COMPIT STEM mobile phone holder for mounting on the stem holds your mobile phone firmly and securely in place, even in tough off-road conditions. The high-quality smartphone holder is mounted below the existing ahead cap on the handlebar stem. Thanks to the bayonet mount, the mobile phone can be mounted quickly and easily with a single twist - in either direction. This means that the cockpit stays clean and the handlebar remains free. The mobile phone holder with its stem mounting also provides an ideal solution for using the COMPIT system for electric mountain bikes with 35mm handlebar clamps as well. Features: Fork Steerer/Headset Compatibility: 1 1/8" For Ahead stems Please Note: Smartphone cover required Part Number: 11655Buy Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mobile phone holder for universal use Simple fast and universal: With a robust hook and loop fastener and two locking rings the COMPIT ANYWHERE mobile phone holder can be mounted securely on the handlebars stem or top tube. The system can also be easily attached to buggies and removed again. The 30 cm long rubberised hook and loop fastener ensures a perfect hold; the locking rings are slip-resistant and protect the surface. Mounting with hook and loop fasteners Thanks to the tilt adjustment the position of the mobile phone can be optimally adjusted to ensure good readability from any angle. Note: A special smartphone cover/bag is required! For mounting on the handlebars stem or top tube Bayonet fastening Horizontal and vertical mounting Adjustable angle Mounting with hook and loop fasteners and locking rings Made in Germany
INTEGRATED · MINIMALISTIC · SIMPLE Can be integrated unobtrusively into the cockpit High stability Minimalist design Mobile phone holder with bayonet mount Head set | Ø 1 1/8 inches For ahead stems
RockShox Suspension Oil, 32oz 1 Litre Bottle, 'Zero Dragracing fork fluid. With a special anti-foam, anti-wear blend. Viscosity stable base stocks and lubricinol additive conditions seals and prevents fork drag."Zero Drag" racing fork fluidSpecial anti-foam, anti-wear blendViscosity stable base stocks and lubricinol additive conditions seals and prevents fork drag150+ viscosity index is superior to conventional fork oils.
Everything in view - In any weather!The waterproof COM/SMARTBAG universal smartphone case can be mounted to any COMPIT mobile phone holder thanks to the adapter. A special COMPIT cover is therefore not needed. The mobile phone is always in sight and is protected against splashing water at the same time. The COM/SMARTBAG can be attached and removed quickly with one twist. The large transparent window ensures easy use of the touch screen and the mobile phone can also be unlocked with the touch of a finger directly through the transparent film. The extra pocket underneath offers not only additional space for keys and money, but also space for the COM/UNIT power bank for inductive charging of the mobile phone during cycling. Strong vibrations might cause an interruption of the inductive charging. On rough grounds it’s advisable for this reason to charge the mobile phone with a cable. Still using a cable it’s possible to attach the COM/UNIT under the SMARTBAG, directly to the COMPIT mount. In this case charging runs exclusively with cable using the cable duct. Suitable for mobile phones with a maximum size of 155 x 80 x 15 mm.For all common Smartphones!Note: ONLY compatible with the Compit system.
The waterproof COM/SMARTBAG universal smartphone case can be mounted to any COMPIT mobile phone holder thanks to the adapter. A special COMPIT cover is therefore not needed. The mobile phone is always in sight and is protected against splashing water at the same time. The COM/SMARTBAG can be attached and removed quickly with one twist. The large transparent window ensures easy use of the touch screen and the mobile phone can also be unlocked with the touch of a finger directly through the transparent film. The extra pocket underneath offers not only additional space for keys and money but also space for the COM/UNIT power bank for inductive charging of the mobile phone during cycling. Strong vibrations might cause an interruption of the inductive charging. On rough grounds it’s advisable for this reason to charge the mobile phone with a cable. Still using a cable it’s possible to attach the COM/UNIT under the SMARTBAG directly to the COMPIT mount. In this case charging runs exclusively with cable using the cable duct. Suitable for mobile phones with a maximum size of 155 x 80 x 15 mm. FOR ALL COMMON SMARTPHONES! NOTE!ONLY COMPATIBLE WITH THE COMPIT SYSTEM.
Pita Pedal Covers protect your bike, and other bikes around it, against damage when in storage and transit.If you've ever scratched a mate's paint with your pedal or bent a spoke in the van you'll know exactly why you can't live without a Pita.Color: Black, Camo GreenSize: Large (Fits pedals up to 4.53" x 4.53" (115mm x 115mm) / Small (Fits pedals up to 3.94" x 3.35" (100mm x 55mm)
The smartphone has to be provided with a suitable COMPIT COVER before it can be securely mounted on the COMPIT or the +COM/UNIT.The smartphone cover with the special mounting device makes it possible to dock the smartphone onto the system by pushing it on and turning it over the oversize bayonet mounting.Shock absorbing materials that the cover is made of, enclose the outer edges of the smartphone and protect it in the event of impact.Use of high quality and wear-resistant plastic makes the cover especially robust at the points of maximum stress.The 2-component cover that is pleasant to the touch can be easily attached to and removed from the smartphone.Material: Plastic
Cover for the COMPIT or COMPIT/E smartphone holderCompatible with iPhone 6/7/8, 6+/7+/8+ and iPhone X
The smartphone has to be provided with a suitable COMPIT COVER before it can be securely mounted on the COMPIT or the +COM/UNIT. The smartphone cover with the special mounting device makes it possible to dock the smartphone onto the system by pushing it on and turning it over the oversize bayonet mounting. The shock absorbing materials that the cover is made of enclose the outer edges of the smartphone and protect it in the event of impact. The use of high quality and wear-resistant plastic makes the cover especially robust at the points of maximum stress. The 2-component cover that is pleasant to the touch can be easily attached to and removed from the smartphone.
Samsung S7 compatible cover for the COMPIT or COMPIT/E smartphone holder. Bayonet fitting on the outside, with a soft inner layer on the inside.