DMR Vault V2 PedalsBuilding on the established design of it top-selling V8 and V12 models, DMR’s V2 Vault flat MTB pedals are ideal for everything from smashing down descents and climbing steep trail sections. With their tough CrMo (Chromoly) axles and extruded 6061 aluminium platforms, they are both durable and low in weight.Tough Downhill Flat PedalsThis tough construction means you can confidently take on the biggest jumps and be certain that pedals can withstand the landing. They also offer excellent grip, foot stability and clearance, thanks to the 11 pins per pedal, concave-shaped footbed and thin 17mm profile.Features: Material: Body: Extruded 6061 Aluminium; Axles: 4140 CrMo (Cromoly) Steel Size: 105x105mm with 17mm concave footbed Tuneable: 11 ‘flipPin’ per pedal can be fitted ‘short’ or ‘long’ to fine-tune the grip available Bearing Type: Cartridge bearings Serviceable: High load DU bush and cartridge bearing Axle Size: 9/16” Use: All Mountain, Enduro, Downhill Weight: 430g (Pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Vault V2 Exclusive Flat MTB PedalThese exclusive pedals are built around the established design of DMR's top-selling V8 and V12 models. With their tough CrMo (Chromoly) axles and extruded 6061 aluminium platforms, they are both durable and low in weight. Coming equipped with an exclusive design that features copper pins, this model offers a dependable performance as you weave between the mountain bike trails at speed.Tough Downhill Flat PedalsThis model's tough construction means you can confidently take on the biggest jumps and be certain that they can withstand the landing. They also offer excellent grip, foot stability and clearance, thanks to the 11 pins per pedal, concave-shaped footbed and thin 17mm profile.Features: Body Material: Extruded 6061 Aluminium Axle Material: 4140 CrMo (Cromoly) Steel Pins: Exclusive Copper pinsUse: All Mountain, Enduro, Downhill Size: 105x105mm with 17mm concave footbed Tuneable: 11 "flipPin" per pedal can be fitted "short" or "long" to fine-tune the grip available Bearing Type: Cartridge bearings Serviceable: High load DU bush and cartridge bearing Axle Size: 9/16" Weight: 430g (Pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Terror Pins Extra long, Chrome plated pedal pins to give claw like grip for DMR V8 and V12 pedals - Wear Pads!Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Comp/Neutron Replacement PinsFuelled by a passionate team of riders, racers and mechanics, Nukeproof benefits from a wealth of knowledge and experience which can only be developed through years of hands on experience. Use the right parts with these genuine Nukeproof replacements.Features: Genuine 24 replacement and adjustable steel pins with nutsCompatible with Nukeproof Horizon Comp and Neutron (Electron) Evo pedalsBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SunRace 12 Speed Hollow Pin Bike ChainThe 12-Speed hollow pin chain is built around strong chromoly steel plates for maximum stability and performance. Its hollow pin design delivers superb plate retention strength and front and rear shifting efficiency. Weighing in at only 250g, you'll not have to worry about any excess weight holding you back as you achieve perfect shift performance.Features: Material: Chromoly plates; Chromised pins and rollers Speed: 12-Speed Weight: 250g (approx)Buy SunRace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor Cross Country Crank Arm Bumper SetThis stunning XC bumper set protects your crank arms against all the wear that comes with a long day exploring the mountains. When riding off-road you face everything from tree roots, rocks and unexpected jolts, so this superb bumper set will come in handy by offering another layer of protection.Features: Strong rubber construction Protection against wear Easy to useBuy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor 2Inpower Crank Arm Bumper SetThese superb bumpers are specifically designed for use with your Rotor 2INPower MTB cranks. Additionally, they provide excellent protection from scratches and chips caused by rocks, roots and trail obstacles. Finally, these come in a variety of selectable colour options, so you can compliment and customise your cranks with eye-catching bumpers.Features: Material: Rubber Compatibility: Rotor 2INPower MTB cranks Weight: 16.9gBuy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF41 Press Fit Stainless Bottom BracketDesigned and manufactured in the UK, this Hope Press Fit bottom bracket has stainless steel bearings and suits BB92 and BB89 bottom bracket shells. It's compatible with any crank with a 24mm axle, such as Shimano Hollowtech II chainsets and SRAM GXP (with separately sold adaptors). It can also easily be serviced with replaceable sealed bearings and external labyrinth seals.Features: Type: Press Fit Bearings: Stainless Steel Axle Compatible: 24mm Cup Diameter Measurements: 41mm external, 24mm internal Bearing cups thread into a centre tube to give a very secure, safe fit Easy to service and replaceable parts Specific fitting tool required - purchased separatelyManufacturer Reference Number: BBPF41SSN Weight: 112g (approx) Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA BB30 Road Bike Bottom Bracket (OS6000)Accurately machined by FSA to suit road bike BB30 bottom bracket shells, this pair of fully sealed BB30 bearings come with lightweight alloy carriers and durable chrome steel ball bearings. Delivering a smooth rotation and all-weather protection, they ensure you get the most from your drivetrain on every ride.BB30 is a design where the bearings press directly into the frame and seat against circlips installed in machined grooves inside the bottom bracket shell. BB30 compatible shells have a 42mm inner diameter (ID) and have no threading. BB30 bearings have a 30mm ID that directly fit BB30 model cranksets with a 30mm outer diameter (OD) spindle.Features: Material: Alloy Carrier, Chrome Steel BB30 cartridge bearings Bottom Bracket Type: BB30 BB Shell Width: 68mm, Road/BMX Includes: 2x Stainless steel BB30 cartridge bearings, Wave Spring and circlips, Nylon adjustment washers Suits Axle Size: 30mmManufacturer's Part Number: 200-3002 Weight: 50gBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.