Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Part of Fox Suspension's Performance Series, it features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. - 58mm crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). - 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model. Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mm
Fox Suspension 38 Float Performance Grip ForkPart of Fox Suspension's Performance Series, this enduro fork features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, the Fox Suspension 38 Float Performance Grip Fork sets a new benchmark for confidence, performance, and durability. Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (3-position on-the-fly adjustability) Adjustments: Compression damping positions Open, Medium, Firm; Additional micro-adjust between settings Detents; Low-speed rebound Travel: 170mm Rake: 44mm Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. 58mm crown diameter to match modern frame shape profiles. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model.Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standards.FEATURESDedicated 26" wheel configuration delivers shortest possible crown height for flickable front end.,Legendary Bomber durability with 36mm stanchions.,Buttery and easy-to-use GRIP damper.,Tapered steerer tube for maximum stiffness.,Adapters available for 15x100mm axle..SPECIFICATION100mm travel.,Grip Damper.,1.5 Tapered steerer.,20x110 non-boost or 15x100.,26" Wheel Optimized.,37mm offset.,Gloss Red and Matte Black.,2095 grams..
Roll on the past or relive your childhood on the GT Heritage. Inspired by GT’s Freestyle roots loaded with the details to make this vintage inspired bikes as legendary as their predecessors. ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 29" TOP TUBE LENGTH: 23.5" CHAIN STAY LENGTH: 17.4" HEADTUBE ANGLE: 71° SEAT TUBE ANGLE: 72° FORKS: GT 86' Pro Performer Design, 100% Cr-Mo 2pc. Steerer, 31.8 O.D. Blades, 3/8" Axle Dropouts BARS: GT Pro Performer Cruise Control 2pc. 100% Cr-Mo, 7.875"H x 31.5"W, 5°Up, 9° Back STEM: GT Mallet 100% CNC Front Load, 1-1/8", 19mm Rise, 43mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Promax P-1 Aluminum V-Brake w/ Soft Compound Pad FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT Smoothie 29 x 2.5" SPROCKET: GT 5mm 36T 86' Performer Design Alloy Chainwheel CRANKS: GT Power Series Alloy 3pc., 175mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Cruise Control Railed GEARING: 36/16 WEIGHT: TBC ###section### Product Highlights Larger Wheels for that road bike performance with a BMX feel Larger wheels allow for a more comfortable ride without sacrificing too much of that BMX feel Strong Lightweight Chromoly Frame Sealed Bearings All Round Strong Lightweight 3 Piece Chromoly Cranks ###shogun-image-section###
The Street Sweeper is designed with serious street riders in mind. Built around Jake Seeley’s chromoly aftermarket signature frame, it uses a 75.25° head tube angle, a very short chainstay and a higher bottom bracket to match perfectly with Jake’s technical riding style. With its 4-piece bars, 160mm cranks, sealed Odyssey Clutch freecoaster and Sunday Street Sweeper tyres, this is truly a pro-level bike. ###section### Product Specs FRAME MATERIAL: 100% Chromoly Frame WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 12.7"-13” HEADTUBE ANGLE: 75.25° SEAT TUBE ANGLE: 71° FORKS: Sunday Pro, 20", 100% chromoly fork w/ 1-piece steerer tube and welded pre-load, 25mm offset BARS: Sunday, 100% chromoly, 4-piece 9" STEM: Sunday Freeze Top load, 48mm HEADSET: FSA integrated conical, 1-1/8" BRAKE MOUNTS: Removable BRAKES: Odyssey Springfield U-brake FRONT HUB: Sunday, 36H, low-flange, sealed , 3/8" female axle FRONT RIM: Odyssey Quadrant, 20", 36H REAR HUB: Odyssey Clutch v2 freecoaster, 36H, 14mm female axle w/ 9T driver, non-drive PC guard REAR RIM: Odyssey Quadrant, 20", 36H TYRES: Sunday Street Sweeper 20 x 2.4" SPROCKET: Sunday Sabretooth v2, 25T, 6061 aluminum CRANKS: 160mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Odyssey Twisted PC Pro SEAT: Sunday Badge, Pivotal GEARING: 25/9 WEIGHT: 24.97lbs (brakeless) ###section### Product Highlights Great for riders who are between 5ft and 6ft tall (150cm - 180cm) Designed to excel at Street riding thanks to responsive geometry but will feel at home in any riding environment Allows for more fakie tricks Sealed bearings throughout Removable Brake Hardware ###shogun-image-section###
The Fox 32 SC is the ultralightweight cross-country racing weapon. The Step-Cast's pioneering lower leg shape isn't just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor.New graphicsSame stiffness as 34Lockout for increased efficiencyOptional remote lockoutFLOAT EVOL air springSpecification:Damper: FIT GRIP 3-Pos LeverTravel: 100mmAir Spring: FLOAT EVOLAxle Options: Kabolt 110mmSteerer: TaperedWheel size: 29"Offset Options: 44mmUpper Tube Finish: Black AnodizedColours: Matte BlackWeight: 1387g starting weight (3.06 lbs.)
The Aqua Marina Tomahawk AIR-K 440 High Pressure Kayak (2 Person) Package has been designed for the most ambitious and experienced of adventure paddlers. Fully constructed with Drop Stitch Technology and a high pressure drop-stitch PVC hull from top to down, it combines the efficiency, stability, comfort, and speed of both a kayak and canoe in one. Offering all you need for a perfect cruising with a light load, it is a leading speed-air-watercraft with a streamlined floor, moulded V-shaped form under its bow and stern, which alongside its high-end fin system, offers a remarkable tracking performance as well as allowing paddlers to make quick and stable turns. Durable and faster than traditional inflatable kayaks, it is also complemented with three separate air chambers for safety over long-distance exploring and a water splash guard to keep passengers protected. Furthermore, this all-round package is finished with two adjustable and removable kayak seats, alongside a built-in adjustable footrest for comfort, two kayak fins, a Double Action Liquid Air V1 Pump for quick and easy inflating, and a zipped backpack, making it easily portable for adventuring home and away.
RockShox Reverb AXS Dropper SeatpostIdeal for your next upgrade, this seatpost from RockShock uses a robust alloy composition that's ready to tackle any terrain. Featuring IFP (Internal floating piston) technology that offers fast post-actuation without force, you can also tailor its movement to your preferences with the AXS mobile app. Thanks to the wireless remote, you can easily adjust to your perfect height whilst on the move, so you can concentrate purely on the track ahead. Features:Part No: SP-RVB-AXS-A1Material: AlloyDiameter Options: 30.9mm, 31.6mm, 34.9mmLength Options: 340mm, 390mm, 440mm, 480mmTravel Options: 100mm, 125mm, 150mm, 170mmConnection Type: WirelessRemote includedWeight: 681g (approx. for 170mm version)Technologies:Vent Valve Technology: For super simple service if the need arises without any disassembly of the postLower friction IFP: Allows for faster actuation of the post and less force neededAXS Technology: Allowing for customisation to an individual rider’s liking via the AXS Mobile AppBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Reverb AXS Dropper SeatpostIdeal for your next upgrade, this seatpost from RockShock uses a robust alloy composition that's ready to tackle any terrain. Featuring IFP (Internal floating piston) technology that offers fast post-actuation without force, you can also tailor its movement to your preferences with the AXS mobile app. Thanks to the wireless remote, you can easily adjust to your perfect height whilst on the move, so you can concentrate purely on the track ahead. Features:Part No: SP-RVB-AXS-A1Material: AlloyDiameter Options: 30.9mm, 31.6mm, 34.9mmLength Options: 340mm, 390mm, 440mm, 480mmTravel Options: 100mm, 125mm, 150mm, 170mmConnection Type: WirelessRemote includedWeight: 681g (approx. for 170mm version)Technologies:Vent Valve Technology: For super simple service if the need arises without any disassembly of the postLower friction IFP: Allows for faster actuation of the post and less force neededAXS Technology: Allowing for customisation to an individual rider’s liking via the AXS Mobile AppBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Reverb AXS Dropper SeatpostIdeal for your next upgrade, this seatpost from RockShock uses a robust alloy composition that's ready to tackle any terrain. Featuring IFP (Internal floating piston) technology that offers fast post-actuation without force, you can also tailor its movement to your preferences with the AXS mobile app. Thanks to the wireless remote, you can easily adjust to your perfect height whilst on the move, so you can concentrate purely on the track ahead. Features:Part No: SP-RVB-AXS-A1Material: AlloyDiameter Options: 30.9mm, 31.6mm, 34.9mmLength Options: 340mm, 390mm, 440mm, 480mmTravel Options: 100mm, 125mm, 150mm, 170mmConnection Type: WirelessRemote includedWeight: 681g (approx. for 170mm version)Technologies:Vent Valve Technology: For super simple service if the need arises without any disassembly of the postLower friction IFP: Allows for faster actuation of the post and less force neededAXS Technology: Allowing for customisation to an individual rider’s liking via the AXS Mobile AppBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
A throwback to the early days of Freestyle the Performer Pro even has all era appropriate graphics and gum wall tyres too. The Pro Performer 20 model looks back to GT's Freestyle roots, paying homage to those early Freestyle machines. Front and rear Odyssey Springfield brakes, a Gyro system and an old school frame construction. Full Cr-Mo construction across the 86' Performer Design frame, forks and bars for durability and strength, as far as retro remakes go the GT Performer Pro 20 is easily one of the best and most reliable. ###section### Product Specs FRAME MATERIAL: Full Cr-Mo WHEEL SIZE: 20" TOP TUBE LENGTH: 23.5" CHAIN STAY LENGTH: 17.4" HEADTUBE ANGLE: 71° SEAT TUBE ANGLE: 72° FORKS: GT 86 Performer Design: 100% Cr-Mo 2-piece Steerer, 3/8" Axle Dropouts BARS: GT Performer Cheat Code 2-piece: 100% Cr-Mo, 7.875" H x 31.5" W, 5° Upsweep, 9° Backsweep STEM: GT Mallet: 100% CNC Front Load, 1-1/8", 19mm Rise, 43mm HEADSET: 1 1/8" Integrated design, 45 x 45 degree sealed bearings BRAKE MOUNTS: Welded U-Brake BRAKES: Odyssey Springfield U-Brake FRONT HUB: GT Superlace High: Alloy CNC Body, Sealed Bearings, 36h, 3/8" x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: GT Superlace High Cassette: Alloy CNC body, 5 Sealed Bearings, 3 Pawl Cassette, 36h, 3/8" x 17mm Female Bolts REAR RIM: Alloy Double Wall, 36h TYRES: SPROCKET: CRANKS: GT Power Series: Alloy 3-piece, 175mm Arms, 22mm Square Cr-Mo Spindle, GT 5mm 36T 86 Performer Design Alloy Chainwheel BB: Mid Sealed Bearing PEDALS: GT Low Profile FS Platform Design SEAT: GT Pivotal Padded GEARING: 36/9 WEIGHT: ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) A great all rounder suitable for any type of riding High-quality Chromoly construction Strong and durable crankset U-brake system on welded mounts ###shogun-image-section###
Roll on the past or relive your childhood on the GT Heritage. Inspired by GT’s Freestyle roots loaded with the details to make this vintage inspired bikes as legendary as their predecessors. ###section### Product Specs FRAME MATERIAL: Chromoly Front Triangle & Chainstays WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 13.5" HEADTUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° FORKS: GT 86’ Performer Design, 100% Cr-Mo 2pc. Steerer, 3/8” Axle Dropouts BARS: GT Performer Cheat Code 2pc. 100% Cr-Mo, 7.875”H x 31.5”W, 5° Up, 9° Back STEM: GT Mallet 100% CNC Front Load, 1-1/8”, 19mm Rise, 43mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Odyssey Springfield U-Brake FRONT HUB: GT Superlace High, Alloy CNC Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: GT Superlace High Cassette, Alloy CNC body, 5 Sealed Bearings, 3 Pawl Cassette, 36h, 3/8” x 17mm Female Bolts REAR RIM: Alloy Double Wall, 36h TYRES: GT LP-5 20x 2.35” SPROCKET: GT 5mm 36T 86’ Performer Design Alloy Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 175mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Pivotal Padded GEARING: 36/9 WEIGHT: TBC ###section### Product Highlights Great for riders who are between 5ft and 6ft tall (150cm - 180cm) Designed to excel at Street riding thanks to responsive geometry but will feel at home in any riding environment Strong Lightweight Chromoly Front Triangle & Chainstays Sealed Bearings All Round Strong Lightweight 3 Piece Chromoly Cranks ###shogun-image-section###