Size specific elite-level platform pedal provides optimal shoe/pedal interface. Details Magnesium pedal body for weight reduction Optimal surface area Minimal body profile - 16mm thin Concave pin profile & 10 adjustable pins per side for grip Premium bearings & seal system Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu) Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu) Specs adjustable pins 10 per side body material AM60B Magnesium Alloy endcap T15 footprint small footprint large 100mm x 100mm 114m x 111mm inner bearing type Igus Bearing max rider weight No restriction outer bearing type Double Cartridge Bearing shoe size US 5-10 // EU 37-43 spindle material Forged SCM 415 Chromoly Steel warranty 5 years weight small weight large 351g per pair 386g per pair
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The level 11 pedal is the top of the range crankbrothers flat pedal with a slimline thin concave profile adjustable pins for grip and a titanium axle. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. Titanium axle. 20 adjustable gold pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on an igus LL-glide bearing which has been exclusively formulated for crankbrothers and performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Specification Weight: 299g (Small) 325g (Large) Spindle: Titanium Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
Size specific elite-level platform pedal provides optimal shoe/pedal interface. Details Magnesium pedal body for weight reduction Optimal surface area Minimal body profile - 16mm thin Concave pin profile & 10 adjustable pins per side for grip Premium bearings & seal system Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu) Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu) Specs adjustable pins 10 per side body material AM60B Magnesium Alloy endcap T15 footprint small footprint large 100mm x 100mm 114m x 111mm inner bearing type Igus Bearing max rider weight No restriction outer bearing type Double Cartridge Bearing shoe size US 5-10 // EU 37-43 spindle material Forged SCM 415 Chromoly Steel warranty 5 years weight small weight large 351g per pair 386g per pair
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in. Moulded traction pins and diamond plate area provide grip and support. Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Double shot Weight (per pair) 403g Spindle Forged scm 435 chromoly steel Body A380 aluminum Wings Stamped steel Spring 300 series stainless steel inner bearing Igus LL-glide bearing Cleats premium brass cleats included Pins 8 adjustable traction pins release angle 15° or 20° Warranty 5 years
Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof extended axle design. Available in a variety of colors to match your rig. Body: Reinforced Premium Thermopoly Axle: CNC-machined Cro-Mo Bearings: Ultralight self-lubricating sealed bushings Replaceable pins Weight: 180 grams (each) Dimensions: 11 x 20 x 7 cm
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 11 pedal is a clipless pedal with a small platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Extremely lightweight: pedal design is very simple with only a few key parts. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 11 Weight (per pair) 249g Spindle 6al / 4v titanium Body 6061-T6 aluminium Wings 6al / 4v titanium Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
Express your personality while boosting your riding enjoyment and safety with the awesome new Geo City Grip featuring LOOK Activ Grip by Vibram. We’ve combined our legendary pedal performance with the expertise of the world’s most famous mountain grip brand to create a fantastic fun colorful town and country pedal. WHY YOU'LL LOVE IT ? Unique interchangeable LOOK Activ Grip by Vibram tread inserts to boost your safety while shouting your personal style. Red lime moody black or crazy camo colour options mean there’s a Activ Grip insert for every rider. Proven on the summits of the highest mountains the golden Vibram badge guarantees your riding confidence on city streets or countryside tours whatever the weather and whatever shoes you’re wearing. Specific grooved multi height ‘City’ tread design for total wet or dry trust. Also works with LOOK’s composite stud and rubber lug Vibram Activ Grip ‘Trail’ inserts for even more grip. Lightweight composite honeycomb base for mountain bike-level strength and durability. Top quality performance bearings for silk smooth pedalling performance however far you’re riding. Add our unique Vision In Light system for unbeatable dynamic visibility day or night. Simple magnetic security with up to 20 hours of standout multi-mode brightness from four powerful USB rechargeable LED lights. TECHNOLOGY: FLAT PEDALS + LOOK ACTIV GRIP BY VIBRAMBODY: COMPOSITEGRIP: VULCANIZED RUBBER ACTIV GRIPSPINDLE: CHROMOLY +SURFACE AREA: 107x103 mmQ FACTOR: 63 mmWEIGHT (PEDAL): 265 gWEIGHT PAIR: 530 g
Rigid body and new strong reinforced outboard design. Black one piece PP body Inc. pedalflip Boron spindle 9/16'
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in. Moulded traction pins and diamond plate area provide grip and support. Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers and Enduro bearings. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Specification Weight (per pair): 331g Spindle: Forged scm 435 chromoly steel Body: Composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Cleats: premium brass cleats included Pins: Moulded traction pins Release angle: 15° or 20° Warranty: 5 years
Super lightweight carbon SPD-SL road pedal for high performance road racing. Wide lightweight carbon body provides large shoe contact area to maximise power transfer and support whilst reducing weight Low profile design increases road clearance for increased confidence when slicing through corners 10 mm body height from axle centre to cleat contact surface Large binding target allows quick engagement while wide cleats provides more efficient pedalling Stainless steel pedal body plates for increased durability Open design allows for easy access and cleat adjustment Low maintenance sealed cartridge axle unit Three types of shoe cleats available: fixed 3 degrees of float in each direction or 3 degrees of float from a front-centre pivot Weight: 248 grams per pair
Great value pedals with ball burnished aluminium body low profile aluminium cage and super smooth sealed bearings.LSL & sealed ball bearingCNC machined CroMo spindles255g pair