Look have completely remodelled the shape of the Keo 2 Max, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.The contact surface width has been increased to 60mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look have also sought to optimize power transfer thanks to its new 500mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance.The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized Chromoly Plus steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Body: CarbonAxle: Chromoly +Float: 8 or 12 adjustable springContact surface area: 500mm²Pedal stack height + Cleats: 17,3mmPedal weight: 125g (312g per pair with cleats and screws)Cleats: Keo grip cleats (included)
Crank Brothers new Stamp 2 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough forged aluminium body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 439g per pair (small size)Small suitable for 32-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a low profile 16mm thin platform and 10 pins per side, the Stamp 2 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 2 is perfect for riders who want a great value and durable aluminium flat pedal!
For some riding, the regular Look X-Track En-Rage can feel a little small. The Look X-Track En-Rage Plus features a bigger platform with 2 traction pins on either side to offer more support for your riding shoes as well as additional grip. The X-Track En-Rage Plus is perfect for heavy-duty trail and Enduro riding.Larger platform than the X-Track En-Rage to increase support and grip when descendingAdjustable release tension allows you to fine tune resistance to your preferenceCompatible with included Look cleats as well as Shimano SPD cleatsGeometry of clip mechanism sheds mud with easeLightweight aluminium construction keeps weight down to just 225g per pedalCleats includedDesigned to be the perfect pedal for Enduro riding, the X-Track En-Rage Plus uses a Shimano SPD-compatible mechanism, allowing you to use the supplied Look cleats or Shimano cleats and SPD-compatible cleats from other brands. The mechanism is not only versatile then, but it also sheds mud easily and is tough enough to shrug off rock strikes from errant pedal strokes. Like Shimano SPD pedals, the release tension can be adjusted to suit your preference; it can be left fairly easy to suit beginners or can be cranked down hard for experienced riders who want maximum retention to avoid any accidental unclipping. The extended aluminium body of the X-Track En-Rage Plus has a bigger contact patch than the regular X-Track En-Rage along, with 2 traction pins per side, providing better stability and grip over rough terrain, but the low profile also help to keep them clear of rocks when pedalling through jagged rock gardens. The aluminium body also keeps weight down to just 225g per pedal. Durability is one of Look s trademarks and the X-Track En-Rage Plus is no different. Equipped with a double weather-resistant seal to help keep the elements away from the spindle and bearings, these pedals are built to last and stand the test of time. Incredibly tough with excellent pedal support, the Look X-Track En-Rage Plus is perfect for trail & enduro riders who want a great value, user friendly clipless pedal.
The DMR Vault V2 Pedal is a much-loved classic flat pedal that s ideal for all types of mountain bike riding. They are however especially liked by all mountain and downhill riders due to their large platform, easy servicing and outstanding levels of grip.Lightweight at 430g per pairTough & durable extruded 6061 Aluminium & 4140 CroMo steel axlesServiceable high load DU bush & cartridge bearingReplaceable pinsThe large platform gives you tremendous stability, a huge amount of grip and excellent mud clearance thanks to the open body design. Constructed from tough 6061 aluminium these pedals are the epitome of tough.The pins are reversible, so you can customise these pedals to your liking; from long and sharp to short and more rounded. A sealed bearing keeps out all that muck and wet that you ll inevitably encounter while servicing is just a case of removing a 6mm dust cap and applying fresh grease.The DMR Vault V2 are a highly durable, light flat pedal that offers almost unrivalled grip and the only choice left to make is what colour you d like them in.
The DMR Vault V2 Pedal is a much-loved classic flat pedal that s ideal for all types of mountain bike riding. They are however especially liked by all mountain and downhill riders due to their large platform, easy servicing and outstanding levels of grip.Lightweight at 430g per pairTough & durable extruded 6061 Aluminium & 4140 CroMo steel axlesServiceable high load DU bush & cartridge bearingReplaceable pinsThe large platform gives you tremendous stability, a huge amount of grip and excellent mud clearance thanks to the open body design. Constructed from tough 6061 aluminium these pedals are the epitome of tough.The pins are reversible, so you can customise these pedals to your liking; from long and sharp to short and more rounded. A sealed bearing keeps out all that muck and wet that you ll inevitably encounter while servicing is just a case of removing a 6mm dust cap and applying fresh grease.The DMR Vault V2 are a highly durable, light flat pedal that offers almost unrivalled grip and the only choice left to make is what colour you d like them in.
The DMR Vault Mag Pedal is a much-loved classic flat pedal that s ideal for all types of mountain bike riding and is no more friendly on the planet and your wallet! Thanks to a unique pressure die casting technology, the Vault Mag V2 is great value and kinder to the environment!Lightweight at 404g per pairED Painted black finish onlyTried and tested at pro levelTrusted Vault platform - 105mm x 105mm17mm concave footbed gives excellent pedal feelThe large platform gives you tremendous stability, a huge amount of grip and excellent mud clearance thanks to the open body design. A sealed bearing keeps out all that muck and wet that you ll inevitably encounter while servicing is just a case of removing a 6mm dust cap and applying fresh grease. The DMR Vault Mag V2 are a highly durable, light flat pedal that offers almost unrivalled grip and helps you do your part for the planet.
Crank Brothers new Stamp 2 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough forged aluminium body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 439g per pair (small size)Small suitable for 32-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a low profile 16mm thin platform and 10 pins per side, the Stamp 2 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 2 is perfect for riders who want a great value and durable aluminium flat pedal!
The DMR Vault V2 Pedal is a much-loved classic flat pedal that s ideal for all types of mountain bike riding. They are however especially liked by all mountain and downhill riders due to their large platform, easy servicing and outstanding levels of grip.Lightweight at 430g per pairTough & durable extruded 6061 Aluminium & 4140 CroMo steel axlesServiceable high load DU bush & cartridge bearingReplaceable pinsThe large platform gives you tremendous stability, a huge amount of grip and excellent mud clearance thanks to the open body design. Constructed from tough 6061 aluminium these pedals are the epitome of tough.The pins are reversible, so you can customise these pedals to your liking; from long and sharp to short and more rounded. A sealed bearing keeps out all that muck and wet that you ll inevitably encounter while servicing is just a case of removing a 6mm dust cap and applying fresh grease.The DMR Vault V2 are a highly durable, light flat pedal that offers almost unrivalled grip and the only choice left to make is what colour you d like them in.
The DMR Vault V2 Pedal is a much-loved classic flat pedal that s ideal for all types of mountain bike riding. They are however especially liked by all mountain and downhill riders due to their large platform, easy servicing and outstanding levels of grip.Lightweight at 430g per pairTough & durable extruded 6061 Aluminium & 4140 CroMo steel axlesServiceable high load DU bush & cartridge bearingReplaceable pinsThe large platform gives you tremendous stability, a huge amount of grip and excellent mud clearance thanks to the open body design. Constructed from tough 6061 aluminium these pedals are the epitome of tough.The pins are reversible, so you can customise these pedals to your liking; from long and sharp to short and more rounded. A sealed bearing keeps out all that muck and wet that you ll inevitably encounter while servicing is just a case of removing a 6mm dust cap and applying fresh grease.The DMR Vault V2 are a highly durable, light flat pedal that offers almost unrivalled grip and the only choice left to make is what colour you d like them in.
The DMR Vault Midi V2 Pedals provide another great flat pedal option for riders with the Vault Midi being a scaled down version of DMR s award winning classic Vault pedal.Platform size 95mm x 104mmOnly 420g per pairSlim 17mm concave foot bedLow profile design for better clearanceThe Vault Midi V2 has the same pin layout and profile as its bigger brother but is 10% smaller making it ideal for those with smaller feet or alternatively those who prefer a smaller platform.They have been constructed from tough lightweight extruded 6061 aluminium with 4140 CroMo steel axles giving excellent durability. They have 11 flip pins per pedal which can be flipped to have the pins long or short allowing you to fine tune these pedals to your preference. They are also fully serviceable meaning you can keep them in full working order yourself with minimal fuss.
For some riding, the regular Look X-Track En-Rage can feel a little small. The Look X-Track En-Rage Plus features a bigger platform with 2 traction pins on either side to offer more support for your riding shoes as well as additional grip. The X-Track En-Rage Plus is perfect for heavy-duty trail and Enduro riding.Larger platform than the X-Track En-Rage to increase support and grip when descendingAdjustable release tension allows you to fine tune resistance to your preferenceCompatible with included Look cleats as well as Shimano SPD cleatsGeometry of clip mechanism sheds mud with easeLightweight aluminium construction keeps weight down to just 225g per pedalCleats includedDesigned to be the perfect pedal for Enduro riding, the X-Track En-Rage Plus uses a Shimano SPD-compatible mechanism, allowing you to use the supplied Look cleats or Shimano cleats and SPD-compatible cleats from other brands. The mechanism is not only versatile then, but it also sheds mud easily and is tough enough to shrug off rock strikes from errant pedal strokes. Like Shimano SPD pedals, the release tension can be adjusted to suit your preference; it can be left fairly easy to suit beginners or can be cranked down hard for experienced riders who want maximum retention to avoid any accidental unclipping. The extended aluminium body of the X-Track En-Rage Plus has a bigger contact patch than the regular X-Track En-Rage along, with 2 traction pins per side, providing better stability and grip over rough terrain, but the low profile also help to keep them clear of rocks when pedalling through jagged rock gardens. The aluminium body also keeps weight down to just 225g per pedal. Durability is one of Look s trademarks and the X-Track En-Rage Plus is no different. Equipped with a double weather-resistant seal to help keep the elements away from the spindle and bearings, these pedals are built to last and stand the test of time. Incredibly tough with excellent pedal support, the Look X-Track En-Rage Plus is perfect for trail & enduro riders who want a great value, user friendly clipless pedal.
The DMR Vault V2 Pedal is a much-loved classic flat pedal that s ideal for all types of mountain bike riding. They are however especially liked by all mountain and downhill riders due to their large platform, easy servicing and outstanding levels of grip.Lightweight at 430g per pairTough & durable extruded 6061 Aluminium & 4140 CroMo steel axlesServiceable high load DU bush & cartridge bearingReplaceable pinsThe large platform gives you tremendous stability, a huge amount of grip and excellent mud clearance thanks to the open body design. Constructed from tough 6061 aluminium these pedals are the epitome of tough.The pins are reversible, so you can customise these pedals to your liking; from long and sharp to short and more rounded. A sealed bearing keeps out all that muck and wet that you ll inevitably encounter while servicing is just a case of removing a 6mm dust cap and applying fresh grease.The DMR Vault V2 are a highly durable, light flat pedal that offers almost unrivalled grip and the only choice left to make is what colour you d like them in.