The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 278g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: cast stainless steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colours options: Silver/Blue or Silver/Red You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
crankbrothers Mallet 2 MTB PedalsDual material pedal DH/Race with stamped steel wings. Adjustable pins for custom traction control.Features:Weight: 495g per pairSpindle: forged scm435 chromoly steelPlatform: two piece aluminum nylon bodyWings: stamped steelSpring: 300 series stainless steelSpindle: forged scm435 chromoly steelInner bearing: bushingOuter bearing: cartridgeRelease angle: 15° - 20°Cleats: premium brassManufacturers Warranty: 5 years Warning: Polycarbonate is incompatible with anaerobic liquids. Do NOT use any non-Polycarbonate approved thread locking solvent (such as Loctite 242) on any part of this pedal or cracking could occur. Loctite 380 or 401 is approved for use on all bolts and pins. Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 428g per pair Platform: Two piece aluminium + composite Wings: Stamped steel Spring: 300 series stainless steel Spindle: Forged scm435 chromoly steel Inner bearing: Bushing Outer bearing: Cartridge Traction pins: 8mm adjustable
Mallet DH are the pedal of choice by most Pro World Cup riders.
crankbrothers Mallet 3 Clipless Mountain Bike PedalsThe crankbrothers Mallet 3 Pedals are now even more durable with a lightweight aluminium inner body and premium bearings.Features:Flat pedal feel with clipped-in controlAluminium platform for enhanced durability6 adjustable pins per side for grip 4-sided entry / superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSpecifications:Spindle Material: Forged SCM 435 CrMo steelBody Material: AluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing type: Igus LL-glide bearingOuter Bearing type: Enduro cartridge bearingCleat: Premium brass cleats with shims includedWeight: 499g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet 3 Clipless Mountain Bike PedalsThe crankbrothers Mallet 3 Pedals are now even more durable with a lightweight aluminium inner body and premium bearings.Features:Flat pedal feel with clipped-in controlAluminium platform for enhanced durability6 adjustable pins per side for grip 4-sided entry / superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSpecifications:Spindle Material: Forged SCM 435 CrMo steelBody Material: AluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing type: Igus LL-glide bearingOuter Bearing type: Enduro cartridge bearingCleat: Premium brass cleats with shims includedWeight: 499g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 435g per pair Platform: Two piece aluminium + composite Wings: Investment cast steel Spring: 300 series stainless steel Spindle: Forged scm435 chromoly steel Inner bearing: Needle Outer bearing: Cartridge Traction pins: 8mm adjustable
The ideal pedal for those wanting the feel of a flat pedal with the security of being clipped in.
crankbrothers Mallet DH 11 Clipless MTB PedalsThe crankbrothers Mallet DH pedals have enjoyed worldwide success on the World Cup Downhill scene and this DH 11 model takes the performance one step further with its titanium wings and dual chamfered edges. This construction and design reduces the weight even further and increases performance. The DH 11 pedals also feature a very distinctive double-anodised black and gold colour scheme, 8 adjustable pins on each side, and a concave shape for a secure foothold and outstanding grip in all conditions.Features: Traction pad technology Ribbed body for better traction when unclipped 4-sided entry Superior mud shedding Customisable float & release angle Premium bearings & double seal system Platform: Extruded/machined 6061-T6 Aluminium Wings: 6al/4v Titanium Spring: 300 series Stainless Steel Spindle: Forged Scandium 435 CrMo Spindle Factor: 57mm Inner Bearing: Type igus LL-glide bearing Outer Bearing: Type enduro cartridge bearing Traction Pins: 8mm adjustable Release Angle: 15°-20° Cleat: Premium brass cleats with shims included Pins: Adjustable pins 8 per side Warranty: 5 years Max Rider Weight: No restriction Weight: 445g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spinning on a CrMo axle, a reliable and strong engagement to your cranks is assured, while the ribbed body section enhances traction for a better grip to your sole. Coming with brass cleats and shims, these hard-riding pedals come with eight optimally-placed pins, letting you ride with controlled aggression whether clipped in or not. Designed with a 15-20 degree release angle, cleat entry and removal is comfortably simple, allowing you to focus on a truly fearless flight to the finish.
crankbrothers Mallet DH Clipless Mountain Bike PedalsIt's easy to see why the Mallet downhill (DH) model is the first choice for multiple professional downhill riders. This is because crankbrothers constructs the body from a bombproof 6061-T6 aluminium, adds stainless steel for the wings and adds forged chromoly (CrMo) axles. The fast-engaging clipless system has a 4-side entry design so you can just stamp your foot in and go, plus its open mud-shedding design prevents dirt build-up. Tough enough to withstand the harshest landings, these high grip, strong and smooth operating pedals are ready to attack the trails.Features: Platform Material: 6061-T6 AluminiumWing's Material: 17-4PH Stainless SteelSpring Material: 300 series Stainless SteelAxle Material: Forged Scandium 435 Chromoly (CrMo)Axle Factor: 57mmAxle Size: Standard 9/16" threadInner Bearing: Type igus LL-glide bearingOuter Bearing: Type enduro cartridge bearingTraction Pins: 8mm adjustableRelease Angle: 15°-20°Cleats: Premium brass cleats with shims includedCleat Type: Shimano Pedalling Dynamics (SPD) typePins: Adjustable pins 8 per sideSpare Pins Included: NoMax Rider Weight: No restrictionWarranty: 5 yearsConcave platform for secure footholdTraction pad technologyCustomisable interfaceRibbed body for better traction when unclippedChamfered edges4-sided entrySuperior mud sheddingCustomisable float & release anglePremium bearings & double seal systemWeight: 479g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.