DMR does performance composite.Presenting the V11 pedal. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR has arrived!The V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip.V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted.V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Lezyne Pedal Rod has been designed for ease of use, with two 15mm offset wrench openings for optimal leverage. The tool head is made of a stamped, CNC-machined heat treated steel plate with an integrated bottle opener. Ergonomic wooden handle for comfortable use.
The Cult Plastic Pedal is a beefy, heavy duty style with a horizontal concave design to grip the sole of your shoe better. A durable nylon construction with solid heat-treated cromo spindles and unsealed bearings. Knurled surface area and molded pins add plenty of grip. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: 456g / 16.1oz
Garrett Reynolds signature pedal from Fiend aims for lightweight, durable perfection with its nylon composite body, classic concave shaped body and chromoly spindle keeping things smooth. The surfaces feature micro-knurling paired with 12 molded pin for added grip. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Unsealed PACK SIZE: Come in Pairs WEIGHT: 357g / 12.6oz
The Tall Order Catch Pedal is built with a nylon plastic body that's incredibly strong and durable, plus it's low friction for when you're grinding. A heat-treated axle helps the pedal feel smooth while a knurled surface with molded pins provides loads of grip and traction. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Plastic BEARINGS: TBC PACK SIZE: 2 (Pair) WEIGHT: TBC
The platform now has increased leading and trailing edge height with knurled traction patches above the axle body to increase overall traction. Along with this, an updated pin layout will ensure the rider’s foot remains ‘planted’ on the pedal to provide improved grip and performance. Light and Tough Flat Pedals These Neutron Evo Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair. Durable and Grippy Built using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip. Installation is done using an 8mm hex key. Click here for a Step by Step Installation Guide Spares Available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.