Rally™ power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing Rally RS200 features SHIMANO SPD-SL cleat compatibility and measures total power, cadence and left/right balance. Even monitor how you apply power throughout the pedal stroke. For single-sensing total power and cadence, check out Rally RS100. These durable pedals install like any other pedals and are easy to transfer between bikes. Instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone*, and review later on the Garmin Connect™ app. View your data on Strava, TrainingPeaks® and TrainerRoad for further analysis, sharing and more.Key Features:Superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with SHIMANO SPD-SL cleats,Rally™?RS200 dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase,Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge® cycling computers or the Garmin ConnectTM app on your compatible smartphone,For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect™ app as well as platforms such as Strava, TrainingPeaks® and TrainerRoad,When the seasons change, you can transfer the spindle between Rally™ RK/Rally XC pedal body kits (sold separately), which are also compatible with the Vector™ 3 power meter,Battery life: up to 120 hours. *When paired with a?compatible smartphone downloaded with the Garmin Connect appTrainingPeaks is a registered trademark of Peaksware, LLC.
Upgrade your Rally RS100 to a dual-sensing power meter, and analyse more than just watts to see exactly how your pedalling style generates the force that moves you.When paired with Rally RS100, the upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics. The power sensor is even transferable to Rally XC pedals so you can have power for your off-road rides.Revolutionary cycling dynamics display where you’re generating power throughout the pedal stroke and show left/right balance. See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency.
Upgrade your Rally XC100 to a dual-sensing power meter, and analyse more than just watts to see exactly how your pedalling style generates the force that moves you.When paired with Rally XC100, the upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics. The power sensor is even transferable to Rally RS and RK pedals so you can have power wherever you ride.Revolutionary cycling dynamics display where you’re generating power throughout the pedal stroke and show left/right balance. See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency.
Garmin Rally XC MTB Power Meter Upgrade PedalSpecifically designed for riders who already own Garmin Rally XC100 power meter pedals, this upgrade pedal converts your single-sided power meter set-up into an in-depth dual-sensing power meter. Perfect for transforming your training sessions, you can analyse more than just watts to see exactly how your pedalling style generates the force that moves you.When paired with Rally XC100, the upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics. The power sensor is even transferable to Rally RS and RK pedals so you can have power wherever you ride.Revolutionary cycling dynamics display where you're generating power throughout the pedal stroke and show left/right balance. See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency.Left and Right Pedalling AnalysisGarmin's Rally power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing technology measures total power, cadence and left/right balance. You can even monitor how you apply power throughout the pedal stroke. The upgrade pedal installs like any other pedal and it's easy to transfer between bikes. Now you can have power readings whether you ride gravel, cross country (XC) mountain bike (MTB) or even cyclocross (CX).ANT+ and Bluetooth ConnectivityThe ANT+ and Bluetooth technology in these smart pedals enables you to instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone and review later on the Garmin Connect app. View your data on popular applications such as Strava, TrainingPeaks and TrainerRoad for further analysis, sharing and more.Features: Dual-Sensing Power Meter Upgrade Pedal Use: Cross Country (XC) Compatibility: Garmin Rally XC100 Axle Size: Standard 9/16" thread Cleat Type: SPD (cleats included) Battery Life: Up to 120 hours (with LR44 battery type) Accuracy: +/- 1.0% Communication: ANT+ and Bluetooth Box Includes: 1x upgrade pedal Adjustable cleat release tension Sleek design provides greater cornering clearance and improved stack height Fully integrates with Garmin cycling ecosystem for data analysis Allows for easy software updates via your Garmin watch, Edge cycling computers or the Garmin ConnectTM app on your compatible smartphone For post-ride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and TrainerRoad When the seasons change, you can transfer the spindle between Rally RS/Rally XC pedal body kits (sold separately), which are also compatible with the Vector 3 power meter Manufacturer's Part Number: 010-12987-02 Black XC SPDBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Garmin Rally Upgrade PedalWith Rally RK100 or Rally RS100 options to choose from, this Garmin upgrade pedal is ideal for transforming your current Rally power meter pedal set-up into a dual-sensing power meter and analyse more than just watts to see exactly how your pedalling style generates the force that moves you. When paired with compatible Rally RK100 or RS100 pedals, this upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics. The power sensor is even transferable to Rally XC pedals so you can have power for your off-road rides. Revolutionary cycling dynamics display where you're generating power throughout the pedal stroke and show left/right balance. See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency.Left and Right Pedalling AnalysisGarmin's Rally power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing technology measures total power, cadence and left/right balance. You can even monitor how you apply power throughout the pedal stroke. This upgrade pedal installs like any other pedal and it's easy to transfer between bikes.ANT+ and Bluetooth ConnectivityThe ANT+ and Bluetooth technology in this model enables you to instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone and review later on the Garmin Connect app. View your data on popular applications such as Strava, TrainingPeaks and TrainerRoad for further analysis, sharing and more.Features: Dual-Sensing Power Meter Upgrade Pedal Use: Road Compatibility: Multiple options available to select separately Axle Size: Standard 9/16" thread Battery Life: Up to 120 hours (with LR44 battery type) Accuracy: +/- 1.0% Communication: ANT+ and Bluetooth Box Includes: 1x upgrade pedal Superior pedal design installs like any other pedal and quickly transfers between bikes Adjustable cleat release tension Sleek design provides greater cornering clearance and improved stack height Fully integrates with Garmin cycling ecosystem for data analysis Allows for easy software updates via your Garmin watch, Edge cycling computers or the Garmin ConnectTM app on your compatible smartphone For post-ride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and TrainerRoad When the seasons change, you can transfer the spindle between Rally RS/Rally XC pedal body kits (sold separately), which are also compatible with the Vector 3 power meterManufacturer's Part Numbers: 010-12987-00 Black RK - Look 010-12987-01 Black RS - ShimanoBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Garmin Rally Upgrade PedalWith Rally RK100 or Rally RS100 options to choose from, this Garmin upgrade pedal is ideal for transforming your current Rally power meter pedal set-up into a dual-sensing power meter and analyse more than just watts to see exactly how your pedalling style generates the force that moves you. When paired with compatible Rally RK100 or RS100 pedals, this upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics. The power sensor is even transferable to Rally XC pedals so you can have power for your off-road rides. Revolutionary cycling dynamics display where you're generating power throughout the pedal stroke and show left/right balance. See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency.Left and Right Pedalling AnalysisGarmin's Rally power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing technology measures total power, cadence and left/right balance. You can even monitor how you apply power throughout the pedal stroke. This upgrade pedal installs like any other pedal and it's easy to transfer between bikes.ANT+ and Bluetooth ConnectivityThe ANT+ and Bluetooth technology in this model enables you to instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone and review later on the Garmin Connect app. View your data on popular applications such as Strava, TrainingPeaks and TrainerRoad for further analysis, sharing and more.Features: Dual-Sensing Power Meter Upgrade Pedal Use: Road Compatibility: Multiple options available to select separately Axle Size: Standard 9/16" thread Battery Life: Up to 120 hours (with LR44 battery type) Accuracy: +/- 1.0% Communication: ANT+ and Bluetooth Box Includes: 1x upgrade pedal Superior pedal design installs like any other pedal and quickly transfers between bikes Adjustable cleat release tension Sleek design provides greater cornering clearance and improved stack height Fully integrates with Garmin cycling ecosystem for data analysis Allows for easy software updates via your Garmin watch, Edge cycling computers or the Garmin ConnectTM app on your compatible smartphone For post-ride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and TrainerRoad When the seasons change, you can transfer the spindle between Rally RS/Rally XC pedal body kits (sold separately), which are also compatible with the Vector 3 power meterManufacturer's Part Numbers: 010-12987-00 Black RK - Look 010-12987-01 Black RS - ShimanoBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Garmin Rally XC MTB Pedal Body Conversion KitThis conversion kit is developed for riders who already own a compatible Garmin pedal-based power meter and would like to swap the power sensor to new pedal bodies for use on another bike. Bringing power to every ride, whether you're clocking up the miles on your road bike or exploring off-road routes on your gravel bike, this conversion kit offers a simple solution for swapping your existing power sensor to new pedal bodies. This kit contains all the components you need to make the switch.Please note: This product contains pedal bodies only, spindles and electronics are not included.Compatibility:This conversion kit is designed for use with Rally RK100, Rally RK200, Rally RS100, Rally RS200 and Vector 3.Cleat Compatibility:The conversion kit is compatible with Shimano SPD style cleats.Features: Left and right pedal bodies (Shimano SPD style) Replacement seals 55mm Q-factor washers Battery doorsManufacturer's Part Number: 010-12900-02 SPDBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Garmin Rally Road Power Meter Upgrade PedalDeveloped for riders who already own a compatible Garmin pedal-based power meter, this conversion kit allows you to swap the power sensor to new pedal bodies for use on another bike. Whether you're clocking up the miles on your road bike or exploring off-road routes on your gravel bike, this conversion kit makes it easy to bring power to every ride. This kit contains all the components you need to make the switch.Please note: This product contains pedal bodies only, spindles and electronics are not included.Compatibility:There are two options available in this product:The Garmin Rally RS option is designed for use with Rally RK100, Rally RK200, Rally XC100, Rally XC200 and Vector 3.The Garmin Rally RK option is designed for use with Rally RS100, Rally RS200, Rally XC100, Rally XC200 and Vector 3.Cleat Compatibility:The Garmin Rally RS option is compatible with Shimano SPD-SL style cleats.The Garmin Rally RK option is compatible with Look Keo.Features: Left and right pedal bodies Replacement seals 55mm Q-factor washers Battery doorsManufacturer's Part Numbers: 010-12900-00 Black Look 010-12900-01 Black ShimanoBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Garmin Rally Road Power Meter Upgrade PedalDeveloped for riders who already own a compatible Garmin pedal-based power meter, this conversion kit allows you to swap the power sensor to new pedal bodies for use on another bike. Whether you're clocking up the miles on your road bike or exploring off-road routes on your gravel bike, this conversion kit makes it easy to bring power to every ride. This kit contains all the components you need to make the switch.Please note: This product contains pedal bodies only, spindles and electronics are not included.Compatibility:There are two options available in this product:The Garmin Rally RS option is designed for use with Rally RK100, Rally RK200, Rally XC100, Rally XC200 and Vector 3.The Garmin Rally RK option is designed for use with Rally RS100, Rally RS200, Rally XC100, Rally XC200 and Vector 3.Cleat Compatibility:The Garmin Rally RS option is compatible with Shimano SPD-SL style cleats.The Garmin Rally RK option is compatible with Look Keo.Features: Left and right pedal bodies Replacement seals 55mm Q-factor washers Battery doorsManufacturer's Part Numbers: 010-12900-00 Black Look 010-12900-01 Black ShimanoBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Garmin Rally XC200 MTB Power Meter PedalsOffering you accurate, reliable and instant ride data to help you adapt and improve your pedalling performance, the Rally RK200 Pedal Power Meter builds on the technologies of Garmin’s popular Vector 3 series. As easy to install as normal clipless pedals, they adopt the commonly used Shimano Pedalling Dynamics (SPD) cleat system for compatibility with most mountain bike (MTB) shoes.Left and Right Pedalling AnalysisGarmin's Rally power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing Rally XC200 measures total power, cadence and left/right balance. You can even monitor how you apply power throughout the pedal stroke. These durable power meter pedals install like any other pedals and are easy to transfer between bikes. Now you can have power readings whether you ride gravel, cross-country (XC) mountain bike (MTB) or even cyclocross (CX). ANT+ and Bluetooth ConnectivityThe ANT+ and Bluetooth technology in these smart pedals enables you to instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone and review later on the Garmin Connect app. View your data on popular applications such as Strava, TrainingPeaks and TrainerRoad for further analysis, sharing and more. Features: Rally XC200 dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase Installs like any other pedal and quickly transfers between bikes Superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with Shimano SPD cleats Sleek design provides greater cornering clearance and improved stack height Fully integrates with Garmin cycling ecosystem for data analysis Allows for easy software updates via your Garmin watch, Edge cycling computers or the Garmin ConnectTM app on your compatible smartphone For post-ride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and TrainerRoad When the seasons change, you can transfer the spindle between Rally RS/Rally XC pedal body kits (sold separately), which are also compatible with the Vector 3 power meter Field calibration Adjustable cleat release tension Axle Size: Standard 9/16" thread Cleat Type: Shimano SPD (cleats included) Battery Type: LR44/SR44 (x4) Battery Life: up to 120 hours (with LR44 battery type) Accuracy: +/- 1.0% Communication: ANT+ and Bluetooth Box Includes: 2x Rally XC200 power pedals, cleats with 6 degrees of float, documentationBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Garmin Rally XC100 MTB Power Meter PedalsBringing you some of Garmin’s top cycling technologies but at a slightly more affordable price point, the Rally XC100 Pedal Power Meter pedals build on the success of the Vector 3S model. This Shimano Pedalling Dynamics (SPD) compatible pair work with most mountain bike (MTB) shoes on the market and give you single-sided power and cadence data, which you can then double up to get an accurate calculation of your overall output. These pedals are the ideal upgrade for those who want to take their training seriously, in order to see serious results on race day.Single-Sided Pedalling AnalysisGarmin's Rally power meters are tested to the extreme, so you can ride there too. Designed for off-road cyclists, you can even monitor how you apply power throughout the pedal stroke. These durable power meter pedals install like any other pedals and are easy to transfer between bikes. Now you can have power readings whether you ride gravel, cross-country (XC) mountain bike (MTB) or even cyclocross (CX).ANT+ and Bluetooth ConnectivityThe ANT+ and Bluetooth technology in these smart pedals enables you to instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone and review later on the Garmin Connect app. View your data on popular applications such as Strava, TrainingPeaks and TrainerRoad for further analysis, sharing and more. Features: Rally XC100 single-sensing power meter measures total power and cadence Rally XC100 is an affordable power meter with the option to upgrade to a dual-sensing system Installs like any other pedal and quickly transfers between bikes Superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with Shimano SPD cleats Sleek design provides greater cornering clearance and improved stack height Fully integrates with Garmin cycling ecosystem for data analysis Allows for easy software updates via your Garmin watch, Edge cycling computers or the Garmin ConnectTM app on your compatible smartphone For post-ride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and TrainerRoad When the seasons change, you can transfer the spindle between Rally RS/Rally XC pedal body kits (sold separately), which are also compatible with the Vector 3 power meter Field calibration Adjustable cleat release tension Axle Size: Standard 9/16" thread Cleat Type: Shimano SPD (cleats included) Battery Type: LR44/SR44 (x4) Battery Life: up to 120 hours (with LR44 battery type) Accuracy: +/- 1.0% Communication: ANT+ and Bluetooth Box Includes: 2x Rally XC100 power pedals, cleats with 6 degrees of float, documentationBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Garmin Rally RK200 Road Power Meter PedalsOffering you accurate, reliable and instant ride data to help you adapt and improve your pedalling performance, the Rally RK200 Pedal Power Meter builds on the technologies of Garmin’s popular Vector 3 series. As easy to install as normal clipless pedals, they adopt the commonly used LOOK KEO cleat system for compatibility with most road bike shoes.Left and Right Pedalling AnalysisGarmin's Rally power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing Rally RK200 measures total power, cadence and left/right balance. You can even monitor how you apply power throughout the pedal stroke. These durable power meter pedals install like any other pedals and are easy to transfer between bikes.ANT+ and Bluetooth ConnectivityThe ANT+ and Bluetooth technology in these smart pedals enables you to instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone and review later on the Garmin Connect app. View your data on popular applications such as Strava, TrainingPeaks and TrainerRoad for further analysis, sharing and more. Features: Rally RK200 dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase Installs like any other pedal and quickly transfers between bikes Superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with LOOK KEO cleats Sleek design provides greater cornering clearance and improved stack height Fully integrates with Garmin cycling ecosystem for data analysis Allows for easy software updates via your Garmin watch, Edge cycling computers or the Garmin ConnectTM app on your compatible smartphone For post-ride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and TrainerRoad When the seasons change, you can transfer the spindle between Rally RS/Rally XC pedal body kits (sold separately), which are also compatible with the Vector 3 power meter Field calibration Adjustable cleat release tension Axle Size: Standard 9/16" thread Cleat Type: KEO (cleats included) Battery Type: LR44/SR44 (x4) Battery Life: up to 120 hours (with LR44 battery type) Accuracy: +/- 1.0% Communication: ANT+ and Bluetooth Box Includes: 2x Rally RK200 power pedals, cleats with 6 degrees of float, documentationBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.