Look Keo 2 Max Carbon PedalsEnjoy enhanced pedalling power, with the Max Carbon Pedals from Look. Offering a wider pedal to push and drive you forward and benefiting from a slimmer design, these pedals combine comfort and power to make a package that helps you push forward. Features:Body Material: CarbonSpindle Material: Oversized Chromoly (CrMo)Intended Use: Recreational to competitionPedal Stack Height: 17.3mm (inc. cleats)Contact Surface Area: 500mm²Tension: 8Nm to 12Nm adjustable springCleats: Supplied with grey Look Keo Grip CleatsFloat: Black Cleat: 0°; Grey Cleat: 4.5°; Red Cleat: 9° (grey 4.5° cleats supplied)Weight: Pedal: 125g; Pair with Cleats: 312gTechnologies:Optimised Surface Contact: The Look Keo 2 Max Carbon pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max Carbon pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best.Improved Spindle Profile: The spindle profile of the Keo 2 Max Carbon pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LOOK KEO 2 MAX CARBON PEDALS WITH KEO GRIP CLEAT RIDE AT YOUR BEST THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodelled the shape of the KEO 2 MAX giving it a new slimmed down line yet a wider contact surface increasing its style and efficiency. TECHNOLOGIES OPTIMIZED CONTACT SURFACE The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep regardless of the position of your foot (depending upon the angular float you use) the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface without any additional weight gain improves the Power to Weight ratio making the product even better and allowing you to perform at your best. IMPROVED SPINDLE PROFILE The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle it is composed of an axle with an inner ball bearing and a needle roller bearing located under the contact surface to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer previously used to hold the needle roller bearing in place has been replaced with a conical spacer. This technical solution reduces friction increases fluidity and by consequence decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. SPECIFICATIONSUSAGE: Recreational to CompetitionBODY: CarbonAXLE: Chromoly +PEDAL STACK HEIGHT + CLEATS: 173 mmCONTACT SURFACE AREA: 500 mm²FLOAT: 8 or 12 adjustable springCLEATS: Kéo Grip CleatsPEDAL WEIGHT: 125 gr (312 gr per pair with cleats and screws)COLOURS: BlackACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years
Ride At Your BestThe new KEO 2 Max is the best product that will give you the confidence you need to go beyond your personal limits.The Look design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.Optimized Contact Surface: The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.Improved Spindle Profile: The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Key Features:Usage: Recreational to Competition,Body: Carbon,Axle: Chromoly +,Pedal Stack Height + Cleats: 17,3 mm,Contact Surface Area: 500 mm² ,Float: 8 or 12 adjustable spring,Cleats: Kéo Grip Cleats,Pedal Weight: 125 gr (312 gr per pair with cleats and screws),Accessories: A pair of Grey Kéo Grip cleats + screws,Guaranty: 2 years.
Whether you're riding for the fun of it or pushing for the top spot on the podium, the Look Keo 2 Max Carbon pedals give you the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max Carbon pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max Carbon pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max Carbon pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Alternative Cleat Float Options: Black Cleats: 0 degrees; Red Cleats: 9 degrees (both alternative versions sold separately)
THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodeled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency. Optimized Contact Surface The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling. This creates a feeling of unrivaled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Specifications: Usage: Recreational To Competition Body: Composite Axle: Chromoly + Pedal Stack Height + Cleats: 17,3 Mm Contact Surface Area: 500 Mm² Float: 8 Or 12 Adjustable Spring Cleats: Kéo Grip Cleats Pedal Weight: 130 Gr (328 Gr Per Pair With Cleats And Screws) Colors: Black Or White Accessories: A Pair Of Grey Kéo Grip Cleats + Screws Guaranty: 2 Years, Look Warranty Policy
Look have completely remodeled the shape of the KEO 2 Max, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.The contact surface width has been increased to 60mm to provide a larger platform and improved foot stability during pedaling. This creates a feeling of unrivaled comfort not found in any other pedal. Look have also sought to optimize power transfer thanks to its new 500mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance.The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized Chromoly Plus steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Body: CompositeAxle: Chromoly +Float: 8 Or 12 Adjustable SpringContact Surface Area: 500mm²Pedal Stack Height + Cleats: 17,3mmPedal Weight: 130g (328g Per Pair With Cleats And Screws)Cleats: Keo Grip Cleats
Look Keo 2 Max Road PedalsWith a thin body for reduced drag and wider size, the Keo 2 Max road bike pedals make your feet more stable and make the most of your power delivery. Made with a tough composite body, a plate of hard-wearing stainless-steel and a chromoly (CrMo) axle, their modern design complements the styling of today’s bikes. By increasing the overall contact area with your cycling shoe, Look has ensured these pedals bring you increased comfort and efficiency.Features: Body Material: Composite body with Stainless-Steel platform Axle Material: Oversized Chromoly (CrMo) Axle Size: Standard 9/16" thread Intended Use: Road (recreational to competition use) Pedal Stack Height: 17.3mm (including cleats) Platform Width: 60mm Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats Included: Yes, supplied with grey Look Keo Grip CleatsFloat: 4.5° grey cleats included (black 0° and red 9° cleats available separately) Distance Pedal Spindle / Crank Arm (Q Factor): 53mm Pair or Single: Pair Weight: Single Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your bestImproved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliabilityBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodeled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency. Optimized Contact Surface The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling. This creates a feeling of unrivaled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Specifications: Usage: Recreational To Competition Body: Composite Axle: Chromoly + Pedal Stack Height + Cleats: 17,3 Mm Contact Surface Area: 500 Mm² Float: 8 Or 12 Adjustable Spring Cleats: Kéo Grip Cleats Pedal Weight: 130 Gr (328 Gr Per Pair With Cleats And Screws) Colors: Black Or White Accessories: A Pair Of Grey Kéo Grip Cleats + Screws Guaranty: 2 Years, Look Warranty Policy
Look Keo 2 Max Road PedalsWith a thin body for reduced drag and wider size, the Keo 2 Max road bike pedals make your feet more stable and make the most of your power delivery. Made with a tough composite body, a plate of hard-wearing stainless-steel and a chromoly (CrMo) axle, their modern design complements the styling of today’s bikes. By increasing the overall contact area with your cycling shoe, Look has ensured these pedals bring you increased comfort and efficiency.Features: Body Material: Composite body with Stainless-Steel platform Axle Material: Oversized Chromoly (CrMo) Axle Size: Standard 9/16" thread Intended Use: Road (recreational to competition use) Pedal Stack Height: 17.3mm (including cleats) Platform Width: 60mm Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats Included: Yes, supplied with grey Look Keo Grip CleatsFloat: 4.5° grey cleats included (black 0° and red 9° cleats available separately) Distance Pedal Spindle / Crank Arm (Q Factor): 53mm Pair or Single: Pair Weight: Single Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your bestImproved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliabilityBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LOOK KEO 2 MAX PEDALS WITH KEO GRIP CLEAT RIDE AT YOUR BEST THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodelled the shape of the KEO 2 MAX giving it a new slimmed down line yet a wider contact surface increasing its style and efficiency. TECHNOLOGIES OPTIMIZED CONTACT SURFACE The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep regardless of the position of your foot (depending upon the angular float you use) the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface without any additional weight gain improves the Power to Weight ratio making the product even better and allowing you to perform at your best. IMPROVED SPINDLE PROFILE The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle it is composed of an axle with an inner ball bearing and a needle roller bearing located under the contact surface to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer previously used to hold the needle roller bearing in place has been replaced with a conical spacer. This technical solution reduces friction increases fluidity and by consequence decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. SPECIFICATIONSUSAGE: Recreational to CompetitionBODY: CompositeAXLE: Chromoly +PEDAL STACK HEIGHT + CLEATS: 173 mmCONTACT SURFACE AREA: 500 mm²FLOAT: 8 or 12 adjustable springCLEATS: Kéo Grip CleatsPEDAL WEIGHT: 130 gr (328 gr per pair with cleats and screws)COLOURS: Black or WhiteACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years
The new KEO 2 Max is the product that will give you the confidence you need to go beyond your personal limits.The Look design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.Optimized Contact Surface: The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.Improved Spindle Profile: The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Key Features:Usage: Recreational to Competition,Body: Composite,Axle: Chromoly +,Pedal stack height + cleats: 17,3 mm,Contact Surtace Area: 500 mm²,Float: 8 or 12 adjustable spring,Cleats: Keo Grip Cleats,Pedal weight: 130 gr (328 gr per pair with cleats and screws),Accessories: A pair of Grey Keo Grip cleats + screws..
LOOK Keo 2 Max Pedals with Keo Grip CleatsRIDE AT YOUR BESTTHE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS.The LOOK design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.TECHNOLOGIESOPTIMIZED CONTACT SURFACEThe pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product.The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal.We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance.Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.IMPROVED SPINDLE PROFILEThe spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.SPECIFICATIONSUSAGE: Recreational to CompetitionBODY: CompositeAXLE: Chromoly +PEDAL STACK HEIGHT + CLEATS: 17,3 mmCONTACT SURFACE AREA: 500 mm²FLOAT: 8 or 12 adjustable springCLEATS: Kéo Grip CleatsPEDAL WEIGHT: 130 gr (328 gr per pair with cleats and screws)COLOURS: Black or WhiteACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years