HT set out to create a lightweight and strong, yet affordable pedal, and they've delivered with the PA12 Pedal. Made from fibre reinforced nylon the PA12s are strong and incredibly durable, their CNC machined CrMo parts ensure they feel smooth while molded pins add plenty of grip. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Sealed PACK SIZE: 2 (Pair) WEIGHT: TBC
Mark Gralla's signature pedal, the Animal Rat Trap. Boasting a classic, low profile design. Using a PC construction for the body that's lightweight and strong with chromoly axles and unsealed bearings. FInished with molded square pins and micro-knurling for added grip. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: TBC
Connor Keating designed his signature Primo pedals to feature a unique body shape that covers the end of the axle to give a near flush connection to the crank arm. This design allows for more foot placement freedom when standing on the pedal as well as more grip, an improved surface contact area for crank arm grinds and just a generally more aesthetically pleasing appearance. The Turbo Pedal can be easily tightened via an allen bolt on the backside of the spindle and also allows for the use of a thin park tool style wrench. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: TBC
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
The tool head on this Lezyne Pedal Spanner is made of a stamped, CNC-machined heat-treated steel plate with an integrated bottle opener. It comes with a shaped and varnished wooden handle for a classic look and comfortable grip. High-strength steel fastening hardware for durability.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.