Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
It features a soft compound chocolate block pattern for increased grip and it has "Peaty" inscribed on it, for increased cool.
The LinkLube All Season Starter Pack contains one 60ml Bottle of Dry All Weather and Wet LinkLube so with one purchase you'll be covered for riding in all season and any weather condition. At a 10% discount (compared to buying the three bottles of 60ml LinkLube individually) The All Season Starter Pack works as a gift or for someone to try out the full LinkLube range for the first time. Features One bottle of 60ml LinkLube Dry. One Bottle of 60ml LinkLube All Weather. One Bottle of 60ml LinkLube Wet. Attractive shelf-ready packaging with integrated Euro hanger made from FSC certified cardboard.
Peaty's Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup - Peaty's RimJob Rim Tape Tubeless Valves and Sealant. If you value more time spent on the bike and less time fixing punctures this is the perfect set up. Not just a few bits thrown carelessly in a bag! Peaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits are available in a variety of configurations so that you can ride with the perfect tubeless set up whatever your discipline: road cyclocross XC enduro downhill - all good to go. Every conversion kit features a handy installation guide on the box with QR links to step by step YouTube videos for each stage of installation - rest assured that the installation process will be slick and swift. WHAT'S INCLUDED? 2 x 120ml Tubeless Sealant pouches (1 x 120ml for the 21mm Road/Cyclocross option). 2x Tubeless Valves. 1x 9metre roll of RimJob Rim Tape which will approximately fit: 5x 26' Rims. 4x 27.5' Rims. 4x 29' Rims. 4x 700c Rims. KIT OPTIONS Road/Cyclocross - 21mm tape / 60mm valves / 120ml Sealant. XC/Urban - 25mm tape / 42mm valves / 240ml Sealant. DH/Enduro - 30mm tape / 42mm valves / 240ml Sealant. DH Wide - 35mm tape / 42mm valves / 240ml Sealant. PEATY'S RIMJOB RIM TAPE Peaty's RimJob Rim Tape is a super high-tensile strength tape primed with a bespoke adhesive which ensures maximal bonding. It has a tried and tested degree of stretch and the large rigid recyclable core allows the tape to be pulled and applied with tension contouring your rim tightly for the best fit. The semi-transparent finish makes locating the valve hole quick and efficient. PEATY'S TUBELESS VALVES Peaty's Tubeless Valves are machined from premium lightweight 7075 anodised aluminium. What makes them a leap above the rest is both valve cores come with integrated valve core removers which makes valve removal and sealant top up a quick and efficient process whether in the workshop or on a ride. If you're looking for the very best tubeless set up on your bike then Peaty's is simply unequalled in lasting performance and ease of installation. TUBELESS SEALANT Peaty's tubeless sealant is an ammonia-free non-hazardous latex-based tubeless tyre compound. Our sealant lasts up to 6 months in the tyre in temperate climates* won't ball up in the tyre and is easily washed out with water. Our lightweight formula seals quickly and effectively while our biodegradable glitter platelets take care of holes and tears up to 6mm. added corrosion inhibitors prevent degradation of tyres and rims. Our biodegradable glitter platelets are derived from starch extracted from sustainably managed Eucalyptus trees.
Whether you've lost a valve cap or just want to bling your existing pair of peaty's valves this kit gives you everything you need. Package contents: 1x spoke key cap (for 3.4mm spoke nipple). 1x valve core remover cap. 2x lock rings. Compatible with all Peaty's Tubeless Valves. Reuse Refresh Recycle Did you know we also make maintenance kits with fresh o-rings rubbers & valve cores?
LinkLube Dry is a readily biodegradable wax-based chain lube for use in desert dry and dusty to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting clean-running quiet chain. Looking for a lube to handle wetter weather? Check out LinkLube All Weather. ALL WEATHER VS. DRY... WHAT'S THE DIFFERENCE? Linklube all weather is our one-stop chain lube for most weather conditions. While the base carrier fluid we use has fast penetrating chain cleaning properties it will never become fully dry to the touch. This can lead to unwanted dust attraction in the driest dustiest conditions so a more bespoke dry lube is required. WHY WATER? WHY WAX? Wax is the best lubricant for dry conditions because when applied correctly it will fill your links and rollers with a hard slippery coating which will last for ages on the trails and is dry to the touch - so dry dirt and dust will not stick to it. For more details on the formulation check out the 'tell me more' section below. APPLICATION When applied for the first time it is essential that linklube dry is applied to a well-degreased and dry drivetrain. If a chain is dirty then dirt and old lube take up space in the rollers preventing new lube from reaching the places it needs to and any residual oil-based lube can also result in reduced durability and premature blackening. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use our foaming drivetrain degreaser or in the case of brand new chains use xxx solvent degreaser to remove stubborn factory greases. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all). Allow chain to dry thoroughly before application. Apply to the inside face of the chain only. The light blue colour to the chain lube allows you to see exactly where you have and haven't applied. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers. Check for over-application. You can tell if you over-apply linklube dry because you'll see the lube start to fill the narrow chain links. If this happens just slowly cycle through your gears a few times to transfer the excess lube onto the cassette. You'll see the lube disappear from the narrow links leaving lube only where it's needed on the chain. Leave to fully dry so the lube goes from a light blue colour to completely clear (you're waiting for the water to evaporate so leaving it in the sun helps). How long it takes for the water to evaporate - and for the lube to turn clear in colour - depends on the weather conditions. This can range from just a few minutes (if hot) to a few hours (if cold and damp). For best results apply the night before. Ride! CAUTION - Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Made from high quality 316 Stainless steel the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft to clean out punctures before plugging and to be as slim as possible so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.With knurling on the tool base and ribbing on the lid you shouldn't have any issues gripping the tool even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags. Features Available in 12x Chris King colours. Quick and easy to insert tyre plugs. With our unique single-sided fork design you simply push and roll the plug into the hook of the fork. With no tight gap to squeeze through the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there. Fork made from 316 stainless steel. Body made from anodised 6061 aluminium. Knurled body and ribbed lid / handle for extra grip. Weather sealing o-rings make the tool waterproof when assembled. Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs.
Bold, fast, light and breathable! This 100% organic ring-spun combed cotton T-shirt can take whatever life chucks its way, whether that's out on the trail, in the pub or at the gym.Key Features:Peaty's Crown Print Logo on the front chest, small peaty's crown print logo on the rear left shoulder.,Available in Mid Heather Blue and Mid Heather grey.,Stanley/Stella 100% Organic ring-spun combed cotton.,Medium Fit S-XXL..
Peaty's Foaming Drivetrain Degreaser is the ultimate bike specific, high strength foaming drivetrain degreaser. Our powerful biodegradable formula has been designed to be tough on grime for fast and powerful drivetrain degreasing, while remaining kind to the rest of your bike and the environment.Application:1. Apply liberally to the cassette while cycling the chain backwards, building up a thick layer of foam.2. Apply directly to any other areas not already coated such as crank arms, derailleur bodies or jockey wheels.3. If you have a bike stand, run through all of your gears several times to agitate the grime.4. Agitate any stubborn areas where needed then leave to soak for two minutes.5. Rinse off thoroughly with clean water.6.Dry the chain using a clean cloth.7. Apply Peaty's LinkLube.
For Desert Dry and Dusty to Mildly Moist conditions.Our readily biodegradable LinkLube Dry Weather chain lube uses a unique blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain!Application Instructions:Fully degrease drivetrain. For best results, use Peaty's Drivetrain Degreaser. ,Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all). ,Remove as much water as you can from the chain - a quick wipe with a clean cloth will do fine. ,Give the bottle a good shake to evenly distribute the secret sauce. ,Apply but do not remove any excess lube.,Allow lube to fully dry clear!,RIDE! (Yes, you read that correctly!).
Born in the lab and raised between the tapes, Peaty's Link Lube is a minty fresh, triple distilled, ultra high speed chain oil for use in all conditions. Our unique formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime and replacing them with unique blend of oils and waxes (Peaty's secret sauce) to lubricate and protect. Yes, you read that correctly! Peaty's Link Lube actually cleans your chain as you use it!Application:1. Always fully degrease your drivetrain before applying fresh lube. For best results, use Peaty's Drivetrain Degreaser.2. Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all).3. Remove as much water as you can from the chain - a quick wipe with a clean cloth will do fine.4. Give the bottle a good shake to evenly distribute the secret sauce.5. Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered.6. Keep cycling the chain for 10seconds or so to help the lube work its way into your chain.7. Thoroughly wipe away all excess lube from your chain using a clean cloth (excess oil on the outside of the chain will attract dust in dry conditions).Tips:1. For wet weather conditions, leave a small amount of lube on the outside of the chain for longer-lasting protection.2. On first use with pre-used chains, you may find that your chain turns black - this is the LinkLube driving out grime from deep in your chain. Just keep riding, degreasing, lubing and repeating until your chain runs shiny clean once more! Caution - Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.