The DTD-8 is a precision Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-8 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T8 tip. DTD-8 FEATURES T8 Torx®-compatible wrench Not intended for high-torque applications Total length: 3.75' (95 mm) Shaft length: 1.7' (43 mm) Weight: 2.22 oz. (63 g)
The DTD-10 is a precision component Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T10 tip. DTD-10 FEATURES 10 Torx®-compatible wrench Not intended for high-torque applications Total length: 3.75' (95 mm) Shaft length: 1.7' (43 mm) Weight: 2.22 oz. (63 g)
A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean adjust maintain and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools. INCLUDES: AWS-10 Fold-Up Hex Wrench Set BBB-4 Big Blue Book of Bicycle Repair — 4th Edition CC-3.2 Chain Checker CN-10 Professional Cable and Housing Cutter CT-5 Mini Chain Tool FR-5.2 Cassette Lockring Tool GSC-1 GearClean™ Brush HCW-16.3 Chain Whip / Pedal Wrench HR-8 8mm Hex Wrench MLP-1.2 Master Link Pliers SD-2 #2 Phillips Screwdriver SW-7.2 Triple Spoke Wrench TL-1.2 Tire Lever Set TWS-3 3-Way Torx® Compatible Wrench — T10/T25/T30
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings including Shimano® Ultegra® BBR60 and Deore XT® MT-800 bottom brackets. Manufactured in-house by Park Tool anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8' drive. The BBT-59.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent adjustable pressure to the tool ensuring full engagement with the tool fitting and preventing slippage. BBT-59.3 FEATURES Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 41–42 mm and a minor diameter (inside of notches) of 39 mm including: Shimano® Ultegra® BBR60 Shimano® Deore XT® MT-800 3/8' drive fitting
A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit as well as a quick-release height adjustment lever for easy secure adjustment. Featuring 18' (460mm) of height adjustment and 360 degrees of clamp rotation positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability with tubular support braces a locking support yoke and upgraded internals for extra dependability The PCS-10.3 is able to hold up to 80lbs. (36kg) which allows for compatibility with virtually all two-wheeled pedal-driven bicycles including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) so your tools and small parts are always within reach Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments cleaning and repair The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8' to 3' (22mm - 76mm) diameter tubes and seat posts of any shape and material including aero posts and dropper posts Narrow clamping jaws (2.7'/70mm) fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) Maximum weight capacity*: 80lbs. (36kg) Height adjustable from 39' to 57' (990mm - 1450mm) using convenient quick-release lever Base when open forms a triangle of 36' x 36' x 48' (920mm x 920mm x 1210mm) Folds down to 45' x 14.5' (1140mm x 370mm) Weight: 16lbs. (7.2kg) Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs
The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic 'quick-change' handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use and is fully rebuildable. Includes the following magnetic 1/4' bits: 2mm 2.5mm 3mm 4mm 5mm & 6mm hex T25 Torx®-compatible #2 Philips cross tip Bit holder includes empty spaces for 2 extra bits
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The CG-2.4 contains everything needed to quickly and easily clean the chain cogs and chainrings: CM-5.3 CYCLONE™ CHAIN SCRUBBER Clean bicycle chains quickly easily and effectively without the hassle and mess of removing the chain from the bike. The CM-5.3 uses an extra-large solvent reservoir and a series of four rotating brushes to get chains sparkling clean inside and out. A magnet at the bottom of the CM-5.3's solvent reservoir draws away particles scrubbed from the chain effectively keeping them from being redistributed on the chain during cleaning. The durable sponge material draws solvent from the chain as it exits the CM-5.3 reducing drips and mess. The CM-5.3 can handle any bike-specific chain from wide 3/16' single-speed* to narrow 12 and 13-speed. A reversible handle allows the chain to pass through forwards or backwards for compatibility with center drive e-bikes. CB-4 BIO CHAINBRITE Park Tool CB-4 is a 100% biodegradable natural plant-based degreaser formulated for use in the CM-5.3 Cyclone Chain Scrubber CM-25 Professional Chain Scrubber or with a scrubbing brush as a general purpose degreaser. When used with a chain cleaner CB-4 gets bicycle chains clean inside and out so they're good as new. Will not harm alloy plastic rubber or carbon fiber parts so it's safe to use for cleaning cassettes chainrings pulleys or any other component that accumulates muck and grime. GSC-1 GEARCLEAN™ BRUSH The GSC-1 is specially designed to free your bicycle drivetrain from muck and grime. The comfortable handle features a contoured toothed end to reach dirt deep between the gears and tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and cassette. Also works great on derailleur pulleys brakes or other places where dirt collects. CG-2.4 FEATURES The Chain and Drivetrain Cleaning Kit includes: CM-5.3 Cyclone™ Chain Scrubber GSC-1 GearClean™ Brush 8 oz. bottle of Bio ChainBrite™ The CG-2.4 works on nearly any bike including multi-speed single-speed and e-bikes. INCLUDES: CM-5.3 Cyclone™ Chain Scrubber — Instructions GSC-1 GearClean™ Brush CB-4 Bio ChainBrite™ — Instructions
A precision CNC-machined aluminium tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings including Shimano® XTR® BB93 Dura-Ace® BB9000 and Token® bottom brackets. Manufactured in-house by Park Tool anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8' drive. The BBT-49.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System. (sold separately) Features: Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 39-40mm and a minor diameter (inside of notches) of 37.6mm inlcuding Shimano BB93 Dura-ace BB9000 and Token Also fits chainring lockrings on Shimano® STEPS square spindle e-bike systems including E6000 E6002 and E6050
Shop quality adjustable torque driver that limits torque applied to fasteners preventing overtightening and damage to lightweight components. Adjusts to apply 4 4.5 5 5.5 or 6 Newton Meter (Nm) of torque when rotating clockwise All metal internal construction for long life Comfortable ergonomic composite molded grip Includes 3mm 4mm 5mm and T25 bits (stored in handle) 1 1/4 inch drive Magnetic socket retains bits Assembled and calibrated at the PARK TOOL factory in St. Paul Minnesota
Cleans bicycle chain quickly easily and effectively without the hassle and mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir hundreds of rotating bristles and a two-step cleaning process to get chains really clean improve shifting performance and extend the life of the chain and other expensive drivetrain parts. Works with all multi-speed bikes (5 6 7 8 9 10 11 and 12-speed) as well as some single-speed models and e-bikes The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain Special wicking sponge draws solvent from the chain as it exits minimizing drips and mess Sturdy handle makes the Cyclone™ easy to use and control Holds 2 fluid ounces (59ml) of solvent
Professional quality 7 inch side cutting pliersForged heat-treated cro-moly steel construction for years of useInvisible separator spring and comfortable dual density grips for comfort and convenienceCovered by Park Tool's legendary limited lifetime warranty
Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital dial or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks. DCA-1 FEATURES Compatible with most standard vernier dial and digital caliper designs