Park Tool Adjustable Crown Race Puller CRP-2The CRP-2 from Park Tool is a highly-precise workshop tool for the accurate, simple and safe removal of fork crown races. This fully adjustable and easy to use tool allows for accurate adjustment of the individual blades, which are positioned around the edges of the crown race, once set tight, the crown race can be pulled off efficiently without any risk of damaging the fork. This tool is very versatile and fits around most possible interferences caused by fork top caps and crown protrusions.Features: Material: Steel Compatible Steerer Diameter: 1", 1-1/8", 1-1/4", 1.5 forks - Suspension and Rigid Compatible Steerer Tube Length: 14 to 43cm (5.5 to 17 inches)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Disc Brake Mount Facing Set (DT-5.2) Designed for accurate facing of front and rear disc mounts, the Park Tool Disc Brake Mount Facing Set DT-5.2 is a precision tool system that helps to eliminate poor brake performance, noisy braking and premature wear of parts caused by misaligned disc brake mounts.Robust and VersatileSuitable for facing IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 works with any open or thru-axle dropout setup and width thanks to its telescopic axle adaptors. Complete with a pair of IS Mount and Post and Flat Mount cutters and a solid, compact storage case, the Park Tool Disc Brake Mount Facing Set DT-5.2 is just the job for any workshop or service area.Features: Compatible Mounts: Any IS Mount, Post Mounts, Flat Mounts, Low-Clearance Chainstay Mounts Compatible Axles: Open, Thru-Axle (including Boost 110, Boost 148 and all fat bike axles) Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crown Race Setting System (CRS-15.2)Designed for the fitting of bearing races for 1.5" and 1-1/4" forks, the Crown Race Setting System CRS-15.2 allows you to do so in an easy, damage-free manner. Safe and Accurate Race Seating The system utilises two different insert rings and a further aluminium insert to ensure there is no direct contact with your bearing's surface as you lightly hammer the tube's end cap to seat the race firmly and properly in place. Including an extension that will allow you to work on fork steering tubes up to 425mm, the Crown Race Setting System CRS-15.2 will allow you to fit your races safely and accurately. Features: Material: Aluminium SHIS Terminology: CRS-15 services crown races in SHIS 33 and 40. Compatible Bearing Races: 1.5", 1-1/4" Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bladed Spoke Holder BSH-4 A simple yet essential tool for keeping your spokes in check when truing your wheels, the Bladed Spoke Holder BSH-4 will ensure no twists or bends during realignment. Valuable Wheel-Building Aid Suitable for holding a variety of different sized bladed spokes, the holder is equipped with 4 slots to holder your spokes in place while vital repairs are made. It also doubles up as a bladed spoke straightening device when used in conjunction with a spoke nipple wrench, to make sure your wheel remains a wind-cheater and not an egg beater. The Bladed Spoke Holder BSH-4 may look basic, but it proves its worth in keeping your wheels and spokes in check. Features: Compatibility: Spoke Blades from 0.8 mm to 2 mm Width Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Campag Crank & Bearing Tool Set (CBP-8)The Campag Crank & Bearing Tool Set CBP-8 features everything you need to safely and efficiently remove and install on Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems. Safe Removal and Installation of Cranks and Bottom BracketsThe CBP-8 includes a crank puller for aluminium and carbon fibre Power Torque systems, a bearing puller for Power Torque and Ultra Torque systems and a bearing setter for both systems, making the job of replacing your cranks and BBs less labour intensive. Also included in the set are: Removal adaptor for Power Torque crank bearings Removal protection pads for use with carbon cranks Removal protection adaptor for use with aluminium crank arms Crank removal extension plug for Power Torque Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Adjusting Cap Tool BBT-10.2This Adjusting Cap Tool from Park Tool has been engineered to work with Shimano Hollowtech II Cranks. Constructed from durable investment cast steel, this hard-wearing tool will help you make light work of any maintenance required.Unique Crank Cap Removal Tool The 2-wing designed Adjusting Cap Tool BBT-10.2 provides great leverage for twisting the caps off and on by hand, with an additional spot for an 8mm hex wrench to be used for loosening seized-on caps. It also features a specially sized hook to lift the crank's safety plate, making the Adjusting Cap Tool BBT-10.2 the perfect companion for Shimano Hollowtech II users.Features: Material: Investment Cast Steel Compatibility: Shimano Hollowtech II cranks Functions: Unique cap fitting, safety-plate hook, 8mm hex wrench slot Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Fold-Up Hex Wrench Set (AWS-9.2) Bringing together five commonly used mini-tools in one compact and comfortable fold-up, the Fold-Up Hex Wrench Set AWS-9.2 is a great pocket-sized tool for on-the-go or workshop repairs. Durable and Lightweight Fold-Up Tool Comprising of three hex wrenches, a T25 Torx compatible driver and a flat blade screwdriver, the AWS-9.2 neatly holds the tools within a multi-position composite holder which acts as your tool handle. A whopping 40% stronger than most steel handles, the slip-resistant and comfortable housing allows you to twist, turn and tighten with absolute ease. A great fit for any tool bag or workshop, the Fold-Up Hex Wrench Set AWS-9.2 is as essential as it is compact. Features: Material: Industrial Tool Steel Tools: 3 x Hex Wrenches - 4 mm, 5 mm, 6 mm, 1 x T25 Torx Compatible Driver, 1 x Flat Blade Screwdriver Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Axle & Spindle AV-5 Vice InsertThe ideal vice tool to have in your workshop, this Axle & Spindle Vice Insert helps add control to your workbench vice when carrying out repairs on your bike. Easy to Fit, Magnetic Vice Accessory Equipped with nine standard jaw openings for holding a range of spindle and axle sizes steady, this precision extruded aluminium insert connects to your vice via its magnetic Mini V-block design which provides a strong, non-slip bond and retainer legs for further stability. Also compatible with all Park Tool Freewheel Remover/Lockring Tools, the Axle & Spindle Vice Insert AV-5 is an essential repair tool for any workbench. Features: Material: Precision Extruded Aluminium Jaw Openings: Nine - 5, 9, 10, 12, 14, 20, 25, 30, and 36 mm (including one suitable for holding Hydraulic Tubing) Compatibility: Park Tool Freewheel Remover/Lockring Tool Attachment: Magnetic Mini V-BlockBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Derailleur Screwdriver - DSD The Derailleur Screwdriver - DSD from Park Tool is a long-reaching driver, designed to guarantee a perfect fit with compatible fasteners when you are removing and installing your derailleur. The ideal screwdriver for the professional mechanic. Precision Crafted Professional Screwdriver Machined to exact standards for an accurate engagement with suitably sized components, the Derailleur Screwdriver - DSD features a 5mm precision ground flat blade or cross tip at the tip, manoeuvred by an ergonomic handle made from CNC machined and hard anodised 6061 aluminium. This construction makes for a durable and lightweight screwdriver that can easily get to hard-to-reach fasteners as you carry out your necessary maintenance. Features: Material: CNC Machined, hard Anodised Aluminium Head Size and Type: 5mm precision-ground flat blade or cross tip Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Derailleur Screwdriver - DSD The Derailleur Screwdriver - DSD from Park Tool is a long-reaching driver, designed to guarantee a perfect fit with compatible fasteners when you are removing and installing your derailleur. The ideal screwdriver for the professional mechanic. Precision Crafted Professional Screwdriver Machined to exact standards for an accurate engagement with suitably sized components, the Derailleur Screwdriver - DSD features a 5mm precision ground flat blade or cross tip at the tip, manoeuvred by an ergonomic handle made from CNC machined and hard anodised 6061 aluminium. This construction makes for a durable and lightweight screwdriver that can easily get to hard-to-reach fasteners as you carry out your necessary maintenance. Features: Material: CNC Machined, hard Anodised Aluminium Head Size and Type: 5mm precision-ground flat blade or cross tip Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bearing Cup Press HHP-2A multi-purpose, quick-release device for fast and easy installation and removal, The Park Tool Bearing Cup Press HHP-2 offers fantastic leverage and accuracy when aligning and pressing headsets and cartridge cups in to place. Accurate and Efficient Pressing ToolThe ideal implement for aligning and pressing 1", 1 ⅛", 1 ¼", and 1.5" headset cups, this Park Tool press will also securely fit cartridge bearings and cups firmly in to one-piece bottom bracket shells. Featuring extra long handles for exceptional leverage when loosening and tightening and stepped bushings to ensure the perfect cup alignment is achieved, the HHP-2 can also be used for keeping fixed cup wrenches secure while your remove or install adjustable-type BBs. The Bearing Cup Press HHP-2 is a brilliant bit of kit for all of your pressing needs. Features: Compatibility: 1", 1⅛", 1¼", and 1.5" Headset Cups Maximum Working Length: 315 mm Inlcuded with Press: 530-2 Adaptors for Aligning 1" and 1-1/8" Pressed Headsets (Stepped At 25.7, 29.7, and 32.8 mm)Buy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.