BikeParka Stash Bike CoverKeep your bike sheltered from the outside elements with the Stash Bike Cover BikeParka. Ideal for use both indoors and outdoors, it securely fixes to your bike and when not in use can be stored away in the Stuff Sac.Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars, and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Polyester Ripstop.Fully Seam Sealed.PU Coated.UPF50+Toggle AdjustableEyelets for a LockLight & BreathableStuff Sac Dimensions: 20cm x 12cmDimensions: 220cm x 140cm (L x H) and will fit handlebars up to 65cmBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Stash Bike CoverKeep your bike sheltered from the outside elements with the Stash Bike Cover BikeParka. Ideal for use both indoors and outdoors, it securely fixes to your bike and when not in use can be stored away in the Stuff Sac.Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars, and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Polyester Ripstop.Fully Seam Sealed.PU Coated.UPF50+Toggle AdjustableEyelets for a LockLight & BreathableStuff Sac Dimensions: 20cm x 12cmDimensions: 220cm x 140cm (L x H) and will fit handlebars up to 65cmBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cleans bicycle chain quickly easily and effectively without the hassle and mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir hundreds of rotating bristles and a two-step cleaning process to get chains really clean improve shifting performance and extend the life of the chain and other expensive drivetrain parts. Works with all multi-speed bikes (5 6 7 8 9 10 11 and 12-speed) as well as some single-speed models and e-bikes The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain Special wicking sponge draws solvent from the chain as it exits minimizing drips and mess Sturdy handle makes the Cyclone™ easy to use and control Holds 2 fluid ounces (59ml) of solvent
The Park Tool DTD-10 is a precision component Torx-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminium handle and a precision T10 tip.The DTD-10 is a precision component Torx compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners.The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittingsFeaturing an ergonomic CNC-machined hard-anodized 6061 aluminium handle and a precision T10 tip10 Torx-compatible wrenchNot intended for high-torque applicationsTotal length: 3.75" (95mm)Shaft length: 1.7" (43mm)Weight: 2.22 oz. (63g)
The Park Tool DTD-8 is a precision Torx-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-8 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminium handle and a precision T8 tip.The DTD-8 is a precision Torx compatible driver machined to exact standards to ensure a perfect fit on compatible component fastenersThe stubby size of the DTD-8 provides extra control during removal and installation of delicate hydraulic brake fittingsFeaturing an ergonomic CNC-machined hard-anodized 6061 aluminium handle and a precision T8 tipT8 Torx-compatible wrenchNot intended for high-torque applicationsTotal length: 3.75" (95mm)Shaft length: 1.7" (43mm)Weight: 2.22 oz. (63g)
The LifeLine Pro Park it Stand is a workshop-quality bike stand. Ideal for use with all modern wheel sizes from 14" kids bikes up to 29" MTB (mountain bike) and 700c road wheels.100% assembledTested and far more stable than market-leading brandsCompatible with kids, road and MTB bikes ( kids 14, kids 20+, commute 700c, Road 700c and MTB 29er - all work well)2.4" max tyre size and 20mm is the minimumSpring loaded and lockout feature - can be released for easier storageReally robust stand helped by the 'rocking cradle' that helps seat the wheel
An accurate way to check for wear of roller and pin on chains1% of wear is enough to affect chainrings and sprockets and allow shifting performance to deteriorateJust insert the chain Checker's pins into two links press the swing arm gauge and then check the gauge window for an accurate readingReads wear from 0.25% to 1%10-speed compatible
The DTD-8 is a precision Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-8 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T8 tip. DTD-8 FEATURES T8 Torx®-compatible wrench Not intended for high-torque applications Total length: 3.75' (95 mm) Shaft length: 1.7' (43 mm) Weight: 2.22 oz. (63 g)
The DTD-10 is a precision component Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T10 tip. DTD-10 FEATURES 10 Torx®-compatible wrench Not intended for high-torque applications Total length: 3.75' (95 mm) Shaft length: 1.7' (43 mm) Weight: 2.22 oz. (63 g)
A heavy duty pedal wrench for serious workshop use. Key Features: A heavy duty pedal wrench for serious workshop use. Two 15 mm openings are orientated at 30 degree and 45 degree angles to ensure that you have the best mechanical advantage. The tubular section handle will resist flexing and it is vinyl dipped for comfort and a secure grip. Provides enough leverage to loosen the tightest pedals. Made from Cr-Mo steel for the best strength and durability.
Heavy duty tyre levers for use on the toughest of tyre and rim combinations8 inch long forged steel for superior leverageMakes removal of downhill tubeless Dutch style and high pressure BMX tyres an almost effortless jobSpecially designed tip lifts the tyre bead safely and smoothlySet of 2
The shop quality L-shaped Park Tool pro allen key set has a genuine Bondhus® balldriver tip on the long arm (excluding the 10mm) for hard to reach bolt heads and a straight tip on the short arm for high torque applications. It includes a handy portable tool organiser/holder that's hinged for easy access.