The Didriksons Kenny 5 Parka is a thinner longer-length men’s parka with a clean, stylish look and straight shape. It is wind and waterproof with taped seams and made from a lightweight breathable fabric. It has several handy pockets too on the exterior and inner, which are perfect for housing all your essentials. The cuffs and hood can also be adjusted as needed to keep any excess cold at bay. Further protection is provided by a high collar to protect against cold winds. Additionally, the lining has been dyed using a solution dyeing technique. This technique saves up to 80% water compared to conventionally dyed fabric in the same material. Care Instructions Machine wash 40° gentle cycle. Do not bleach. Do not tumble dry. Iron low heat. Do not dry clean.
The Didriksons Women's Helle 5 Parka will take you from your daily commute to weekend adventures with its high performing design technology. Featuring a regular fit and a figure-shaped silhouette that is slightly tapered at the waist, it has been made with a fully wind and waterproof construction alongside taped seams and a breathable finish for day-long comfort. A fixed hood, high collar and adjustable cuffs and hem also protect against cold winds, while two front pockets and two inside pockets with zips provide ample space for keeping essentials within easy reach. Additionally, for extra sustainability points, the lining has been dyed using a solution dyeing technique. This technique reduces water, energy and chemical consumption during production. The insulation is crafted using recycled fibres and it is complemented with a PFC-free water-repellent treatment. Care Instructions Machine wash 40° gentle cycle. Do not tumble dry. Do not dry clean. Do not bleach. Iron low heat.
The Didriksons Women's Nomi 2 Parka is a padded puffer parka that offers premium protection from harsh weather conditions. Made with a PFC-free water-repellent shell fabric, it boasts an oversized fit with a straight silhouette and features a fixed, adjustable hood and a full-length two-way front zip for optimum warmth. Two zipped front pockets and one inner pocket also provide easy-reach space for essentials. For top sustainability credentials, the Nomi parka's lining has been dyed using a solution dyeing technique. This technique reduces water, energy and chemical consumption during production. Additionally, the Thermore Ecodown Fibres 2.0 insulation had been made from 100% recycled polyester fibres. This synthetic loose-fibre wadding is a down-like material that has all the positive characteristics of down but is completely animal free. Didriksons also use certification under the Global Recycled Standard (GRS) to guarantee the recycled fibres in the recycled materials used. This material has a high level of insulation capacity and provides plenty of volume, so it will keep you warm and cosy even in the coldest of weather. Care Instructions Machine wash 40° gentle cycle. Tumble dry low heat. Do not dry clean. Do not bleach. Do not iron.
The Didriksons Women's Bea Parka Jacket is an ultra versatile shell layer for anything from city life to weekend walks. It is fully waterproof and windproof with all seams taped for a 100% waterproof construction, and is made of a soft polyester with a stylish matte finish. The classic parka also features a feminine cut with a tapering at the waist and a pleated back to ensure a great fit. Additionally, multiple pockets provide ample space for keeping essentials within easy reach, while a fixed hood and adjustable cuffs ensure every ounce of cold is kept at bay. Finished with reflective detailing on the zip pulls and logo front and back. Care Instructions Machine wash 40° gentle cycle. Do not tumble dry. Do not dry clean. Do not bleach. Iron low heat.
Park Tool Mini Pump - PMP-4.2 Mini-pumps with maximum performance don't come much better than the Park Tool Mini Pump - PMP-4.2. Great for mid-ride tyre inflation due to its ultra-portability or for getting you up to pressure in the garage, this handy and durable inflator is a brilliant riding companion. Long-lasting and Efficient Pumping The Park Tool Mini Pump - PMP-4.2's all-aluminium construction gives a durable yet lightweight feel when pumping up your bike tyres, making it a tool you will get a lifetime's worth of use from. Capable of inflating to a maximum 90psi, it is compatible with Presta and Schrader valves and can be carried easily in your kit bag or on the included water bottle cage bracket for ultimate convenience. Weighing in at a tiny 130 grams, the Park Tool Mini Pump - PMP-4.2 offers fantastic inflation and portability for any rider. Features: Material: Barrel - Aluminium Maximum Inflation Pressure: 90 psi Compatibility: Presta, Schrader Valves Length: 265 mm Weight: 130 g Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Stash Bike CoverKeep your bike sheltered from the outside elements with the Stash Bike Cover BikeParka. Ideal for use both indoors and outdoors, it securely fixes to your bike and when not in use can be stored away in the Stuff Sac.Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars, and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Polyester Ripstop.Fully Seam Sealed.PU Coated.UPF50+Toggle AdjustableEyelets for a LockLight & BreathableStuff Sac Dimensions: 20cm x 12cmDimensions: 220cm x 140cm (L x H) and will fit handlebars up to 65cmBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.