The Spark overtrousers are fully waterproof, getting you from A to B in comfort when the weather lets you downReflective exclamation points across the lower leg area gives great night time visibility to passing motorists,Constructed from fully waterproof fabric with taped seams, these trousers are 5k/5k Waterproof/Breathable,An elasticated waistband is backed up by a shock cord to keep these trousers firmly in place,Hook and loop adjusters around the calf allow you to fine tune the fit,Flared fold away hems make the Spark overtrousers easy to take on and take off whilst keeping your shoes on for maximum convenience,Packs away to the size of two apples for stowing in your backpack or pannier if not needed,Main Fabric; 100% Polyester, 85g/m2, coated with C6 DWR.
The Urban is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac, Velcro lock-through panel. The cover can be tweaked to suit any seat and handle bar height. The URBAN design also features unique Velcro lock-through panels, so your lock can be pushed through to secure the cover to your bike. This also keeps the cover down low rather than riding above the lock. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack, and the URBAN Stuff Sac also easily attaches to your bike frame. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Chain Gang Cleaning System (CG-2.4)Keeping your bike drivetrain clean is a breeze thanks to this Chain Gang Cleaning System from Park Tool. This dynamic set includes all the tools you'll need to quickly clean your bike’s chain, freewheel/cassette cogs, and chainrings for a smoother ride every time.Features:The CG-2.4 works on all derailleur bikes and many 3-speed, single-speed, coaster brake bikes, and electric bikes (E-Bikes)Includes:CM-5.3 Cyclone Chain ScrubberGSC-1 GearClean Brush8 oz. bottle of Bio ChainBriteBuy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool Chain Gang chain cleaning system contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. It contains a CM-5.3 Cyclone Chain Scrubber, GSC-1 GearClean Brush and 8 oz. bottle of Bio ChainBrite.
The oversized, asymmetrical head on the Park Tool pedal wrench is made from investment cast Cro-Moly steel for superior strength and durability. While strong, the PW-4 is thin enough to access all wrench flats. The handle is round and vinyl-dipped so it won't dig into the hand like flat wrenches. Its two 15mm wrench openings are oriented at 30 degrees and 45-degree angles so the user can always achieve the best mechanical advantage, regardless of the pedal position.
Park Tool has been manufacturing bicycle specific tools since 1963. Based out of St. Paul Minnesota, they are the world's largest bicycle tool manufacturer. A long-term dedication to quality, innovation, and customer service has made Park Tool the first choice of professional and home bicycle mechanics around the world. Ensure you get a straight clean cut every time. Key Features: Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 3.5 (89mm). Guides fork steerer tubes and other round tubes from 1-1/8 to 1-3/4 (32mm to 45mm). Two different cutting slots included: standard and carbon cutting blade widths. Hardened steel body with moulded contact points to protect tubes and frames.
Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fastenersKey Features:Ergonomic, CNC machined and hard anodized 6061 aluminum handle,Cross tip (#2 Phillips) driver built to exceed JIS standards,Covered by Park Tool's legendary limited lifetime warranty.
Park Tool Derailleur Screwdriver - DSD The Derailleur Screwdriver - DSD from Park Tool is a long-reaching driver, designed to guarantee a perfect fit with compatible fasteners when you are removing and installing your derailleur. The ideal screwdriver for the professional mechanic. Precision Crafted Professional Screwdriver Machined to exact standards for an accurate engagement with suitably sized components, the Derailleur Screwdriver - DSD features a 5mm precision ground flat blade or cross tip at the tip, manoeuvred by an ergonomic handle made from CNC machined and hard anodised 6061 aluminium. This construction makes for a durable and lightweight screwdriver that can easily get to hard-to-reach fasteners as you carry out your necessary maintenance. Features: Material: CNC Machined, hard Anodised Aluminium Head Size and Type: 5mm precision-ground flat blade or cross tip Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.