Search found 1164 items

Park Tool 471XX - Oversize Wood-Thread Storage Hook
  • £9.99

Key Features: Oversized storage hook for use with 'fat bikes',Deep and wide enough to fit even the fattest 5.0" tyres on 100mm rim,Heavy vinyl coating protects the bike or wheel,Zinc-plated and dipped in blue to prevent scratching,Hook measures approximately 5.5 inches (14cm) wide and 9 inches (23cm) deep.

VIEW ITEM
Park Tool 690-XL - Cutter Low-Profile Headsets For HTR1
  • £142.99

Key Features: Facing improves the alignment of bearings in the headset, The 690-XL has an approximate diameter of 58mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsets,Must be used with the 768 pilot to ensure the frame is reamed and faced accurately.

VIEW ITEM
Park Tool 750 - Centering Cone Adaptor
  • £31.99

The Park Tool 750 Centering Cone Adaptor adapts the centering cone on HTR-1 for use on low profile , integrated and OnePointFive (1.5 inch) headsets. The HTR-1 must have the correct cutting tool and pilot for the corresponding standard.

VIEW ITEM
Park Tool 750.2 - Centering Cone Adaptor / Low-profile / Integrated / 1.5 Inch Headsets
  • £31.99

Key Features: The 750.2 Centring cone adapter increases the size of the centering cone of the HTR-1 Head tube Reaming and Facing Set,Fits headtubes with an inside diameter of 38-60mm,Several headset standards use large head tube inside diameters,The 750.2 will allow the HTR-1 to be used with the IS (intergrated headset cups) and the OnePointFive (1.5 inch) headset standard,The HTR-1 must have the correct cutting tool and pilot for the corresponding standard.

VIEW ITEM
Park Tool 752 - Reamer and Spacer Set For BB30 Bottom Bracket Shells
  • £194.99

Key Features:The #752 is used to ream BB30 bottom bracket shells to an ID of 41.94 mm.,Must be used with the HTR-1 Head Tube Reaming and Facing Set with a QK750 Centring Cone Adaptor,

VIEW ITEM
Park Tool 758.2 - Cutter And Reamer 1.5 Inch Headsets For Htr1 & Htr1b
  • £359.99

  The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adaptor to ensure correct alignment1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facerBores a machined surface to a depth of approximately 25mm and then faces the end of the headtubeSHIS terminology: The 758.2 is for EC49 upper and lower headtubesUse with generous quantities of Park CF2 cutting fluid for best results and prolonged tool life

VIEW ITEM
Park Tool 764 - 40.98mm Bottom Bracket Pilot
  • £10.99

Key Features:The #764 pilot is used when facing BB86/92 bottom bracket shells and reaming is not required.,Used in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter..

VIEW ITEM
Park Tool 768 - Pilot 43.8 mm Low-profile Headsets For HTR1
  • £21.99

Key Features: The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headset,The 768 is used with the 690-XL facer and the 750 centering cone adapter,Facing the head tube will improve the alignment of the bearings,The 768 pilot fits the Park tool HTR-1 Head tube Reamer and Facer Set.

VIEW ITEM
Park Tool 788 - Reamer 43.95mm for HTR-1
  • £107.99

Key Features:For use with the HTR-1 Head tube Reaming and Facing Set.,The 788 reams the headtube to an internal diameter at 43.95 mm to accept internal headset cups with 44.05 mm - 44.10 mm outer diameter (1-1/8 inch ZS standard)..

VIEW ITEM
Park Tool Adjustable Crown Race Puller CRP-2 - Silver, Silver
  • £250.00
  • RRP £294.99
  • Saving you £15

Park Tool Adjustable Crown Race Puller CRP-2The CRP-2 from Park Tool is a highly-precise workshop tool for the accurate, simple and safe removal of fork crown races. This fully adjustable and easy to use tool allows for accurate adjustment of the individual blades, which are positioned around the edges of the crown race, once set tight, the crown race can be pulled off efficiently without any risk of damaging the fork. This tool is very versatile and fits around most possible interferences caused by fork top caps and crown protrusions.Features: Material: Steel Compatible Steerer Diameter: 1", 1-1/8", 1-1/4", 1.5 forks - Suspension and Rigid Compatible Steerer Tube Length: 14 to 43cm (5.5 to 17 inches)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Park Tool Adjustable Spanner (SPA-6) - Silver, Silver
  • £27.99

Park Tool Adjustable Spanner SPA-6As a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features:This spanner uses hardened, replaceable pins approximately 2.2mm in diameter. Designed for heavy duty use, the distance between the pins is adjustable, allowing use on virtually all hanger cups using pin holes.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Park Tool Adjustable Torque Driver
  • £72.24
  • RRP £85.00
  • Saving you £15

Here is the Park Tool Adjustable Torque Driver which is a high-quality tool that will enable you to tighten any bolt etc on your bike to the correct torque setting. This will ensure that you don t cause any unnecessary damage especially to lightweight components. The internal construction is all metal for long life with a hand friendly comfortable moulded grip handle which also stores the driver bits helping to ensure you don t lose any. The socket is magnetic too which helps to retain the bit you are using.Torque range: 4, 4.5, 5, 5.5 & 6Nm1 ¼ inch driveIncludes 3mm, 4mm, 5mm and T25 bits

VIEW ITEM
expand_less