Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink™ lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.Weight: 370g (direct mount, 800mm hose, 160mm CL rotor)Lever Material: Forged aluminumCaliper Design: 2-piston caliperFinish: Gloss BlackRotor: CenterLinePad: Steel-backed organicFluid: DOT 5.1Adjustment: Tooled reach adjustTechnology Highlights: DirectLink™, Expandable Bladder, Timing Port ClosureMaterial: AluminumPad / Holder: Top loadingIntended Use: XC, TrailSystem: Open systemRotor Sizes: 140 (rear), 160, 170, 180, 200mmTri-Align Caliper Positioning System: NoSpeed Dial: NoBend Zone™: YesAmbidextrous: YesStainless Hardware: Steel
Lightweight and RacyA sleek and stylish upgrade to the best mechanical caliper on the market. The BB7S stainless steel hardware and anodized finish make it right at home on any road-disc build..Compatible with Red, Force, Rival and Apex levers..Tech Spec : Weight : 197 grams, Caliper Only,Caliper Design : Mechanical, Forged 2-piece Aluminum,Finish : Black Anodized,Rotor : Centerline 140/160mm,Pad : Organic with Steel Backing Plates,Adjustment : Dual Knob Pad Adjustment, Tri-Align Caliper Positioning System,Intended Use : CX/TRK/URBAN/ROAD.Technologies : Tri-Align™ Caliper Positioning System™Another original Avid technology making your life better—there’s never been an easier brake to install and adjust. With Avid’s Tri-Align™Caliper Positioning System™, aligning the caliper to the rotor literally takes seconds. Just loosen the CPS™ bolts a little, and then squeeze the brake lever while re-tightening the bolts. Perfect caliper alignment—just like that.
They are made from 7003 T6 alloy and feature Zero extensions (straight). Pads also included.
7003 T6 alloy drawn aerobar with new design forged clamps. Two curve grip ("S" bend), offers several handle positions, ideal for long rides. Bar end shifter compatible.Adjustable armrest padsArmrest pads includedClamp to fit 35mm handlebar diameterMax length: 290mmWeight: +/- 378g.
The ultimate in performance and durability with low stack height and genuinely low weight. Machined from 7050-T6 aluminium with a split-lip seal to keep contaminants out and grease in with less dragA captured compression ring sets the bearing preload and stays true no matter how you ride (no rocking or creakingPremium split-lip sealed stainless steel bearings give double the protection while decreasing frictionCompatible with Interlock spacersHand polished and anodised.
Confident. Committed.Guide T brings the consistent performance that you have come to expect from our lightweight four-piston calliper. Match this with MatchMaker™ for the cleanest looking bar set-up, plus the ease of use with our Bleeding Edge drip-free bleed port and you have a smart budget minded brake that keeps you in control.Key Features:Lightweight 4-piston dual-diameter calliper,MatchMaker™ compatible,Connectamajig™ available,Now featuring the World Championship-winning S4 calliper with Bleeding Edge™ and Heat Shield technologies,. Specifications:Application (DB): MTB,Brake type: Hydraulic,Blade material: Aluminum - Stamped,Colour (DB): Gloss Black,Rec MMX clamp (not included): n/a,Orientation: L/F, R/R,Pad type (Disc): Steel-backed organic,Bracket (Disc Brake): Direct mount DIR,Hose length (mm): 1800mm, 950mm,Rotor (AM only): n/a, not included,Pistons: 4,Piston material: Phenolic Plastic,Rotor type recommended: 1-piece CenterLine,.
They are made from 7003 T6 alloy and feature Uno extensions (J-bend). Pads also included.
Deda Elementi Parabolica Uno Clip-On Aero BarsIf you’re looking for UCI-approved aero bars to give you a competitive edge on your Time Trail (TT) or Triathlon bike, the Parabolica Uno Clip-On type is a great option. Deda Elementi has made them from light and rigid 6061 aluminium, keeping the weight low and ensuring minimal flex when you’re sprinting. They also come with adjustable armrests and spacers so you can dial in the perfect riding position for efficient aerodynamics, control and power output. Finished off with an anodised matt black coating, they will complement the looks of any modern bike.Features:Material: Alloy 6061 Finish: Black matt anodised Shape: J-bend extensions Extensions Maximum Length: 350mm Handlebar Clamp Area: 31.7mm Bar End Shifter Compatibility: Shifters with 18-23mm diameter Armrest: Full adjustable with pads included Riser Spacers Kit Weight: 140g (weight related to the complete set) Internal Cable Routing: Yes Mechanical and Electronic Shifter Compatible: Yes All Assembly Bolts Included: Yes UCI Approved: Yes, (3:1 rule) Weight: 750g (with packaging)Buy Deda Elementi from Chain Reaction Cycles, the World's Largest Online Bike Store.
Deda Elementi Parabolica Alloy Clip-On AerobarsDesigned with road and time trial cycling in mind, these Alloy Clip-On Aerobars from Deda Elementi are the ideal addition to your bike. Made from durable, lightweight 6061 alloy, forged clamps and arm pads are included. Incredibly versatile, they are available in different extensions, which are suitable for use with mechanical and electronic bar-end shifters.Features:Use: Road, Time TrialMaterial: 6061 alloy 7073Parabolica Zero is straight, just straight, perfect for aerodynamic.Parabolica Due Two curve grip (S bend), offers several handle positions, ideal for long rides.Parabolica Uno has curved ends to improve comfort on longer events and rides and is perfect for getting the optimal aerodynamic position.Bar width measured outside to outsideUCI approvedMaterial: Alloy 6061Armrest: Full adjustable with pads includedCompatibility: Mechanical and electric bar-end shifters compatible Maximum Extension Length: 310mm (Zero), 300mm (Uno), 285mm (Due)Weight: 396g (Zero), 350g (Uno), 300g (Due)Buy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Deda Elementi Parabolica Alloy Clip-On AerobarsDesigned with road and time trial cycling in mind, these Alloy Clip-On Aerobars from Deda Elementi are the ideal addition to your bike. Made from durable, lightweight 6061 alloy, forged clamps and arm pads are included. Incredibly versatile, they are available in different extensions, which are suitable for use with mechanical and electronic bar-end shifters.Features:Use: Road, Time TrialMaterial: 6061 alloy 7073Parabolica Zero is straight, just straight, perfect for aerodynamic.Parabolica Due Two curve grip (S bend), offers several handle positions, ideal for long rides.Parabolica Uno has curved ends to improve comfort on longer events and rides and is perfect for getting the optimal aerodynamic position.Bar width measured outside to outsideUCI approvedMaterial: Alloy 6061Armrest: Full adjustable with pads includedCompatibility: Mechanical and electric bar-end shifters compatible Maximum Extension Length: 310mm (Zero), 300mm (Uno), 285mm (Due)Weight: 396g (Zero), 350g (Uno), 300g (Due)Buy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Parachute is the trailblazer for a new category of helmets purpose-built for Enduro mountain biking. It combines the protection of a full face helmet with low weight, high ventilation and comfort. Riders buy a full face helmet to have more protection to their face, so it’s important to know if the chin guard has been stringently tested and passes the ASTM standard. The fact that the Parachute is ASTM certified gives the confidence to the rider that MET has designed and certified the Parachute to provide the best level of safety in its class. Lightweight comfort The Parachute is the ideal helmet for Enduro racing: weighing in at just 700g (Size M), it is extremely light and well ventilated making it comfortable to wear on climbs and safe on descents. A chin guard that does not restrict breathing The Parachute's non-removable chin guard is integrated into the helmet. Thanks to its construction it is the only chin guard of its kind that exceeds ASTM testing. This technology and highly innovative design create a solid, compact and highly-ventilated chin guard. Adjustable visor with integrated air intake The visor’s role is to protect the face especially the eyes from branches and the sun, or against mud. Fine tune your field of vision by adjusting the anodized aluminum side screws. The visor can easily be adjusted to provide plenty of space to stow your goggles. Keep your goggles secure The Parachute is goggle compatible; a clip system on the back of the helmet keeps your goggle strap in place. MOPOV multi-brand compatible camera mount MOPOV (My Own Point Of View) is a multi-brand compatible camera mount system that our engineers developed to securely mount an action camera onto the helmet without damaging the helmet's shell. Safe-T Advanced Fit System Safe-T Advanced, MET’s top of the line fit system, provides the best weight and comfort ratio. The contact points have a larger cradle surface increasing comfort and are also designed to keep weight low and allow perspiration at the back of the head. Be Seen: The Parachute is compatible with the Safe-T Advanced USB chargeable rear light, available seperately here. The integrated light sensor switches on LEDs automatically in darkness and lowlight conditions and turns the light off when exposed to daylight after a safety period of 15 seconds. Choose between Nightsafe mode and 4 other blinking modes including steady light. MET Warranty and Crash Replacement As an official MET dealer, when you purchase a helmet from us MET guarantee the helmet to be free from defects in both material and workmanship for 2 years from the original date of purchase. They also offer a replacement at a reduced price if your helmet is damaged in an accident. Find out more about the MET warranty and crash replacement here.
Highly adjustable and with comfortable armrest pads included, these extensions are easy to set up and their fully straight shape will help you to adopt an aggressive and very aerodynamic position.