Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Oversized Adjustable Saw Guide SG-7.2 Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 2.75"" (70mm), as well as fork steerer tubes and other round tubes from 1-1/16"" to 1-3/4"" (27mm to 45mm). The SG-7.2 features two different cutting slots — standard and carbon cutting blade widths — in a hardened steel body with moulded contact points to protect tubes and frames.Features: The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deep The guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameter Two cutting slots are provided, one for standard saw blades and one for thicker, carbon specific blades Hardened steel body with moulded contact points to protect tubes and frames Made in the USA and covered by Park Tool's legendary limited lifetime warrantyBuy Park Tool Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Cable & Housing Cutter (CN-10)The CN-10 Cable and Housing Cutter from Park Tool has been designed to cut through bicycle cables and housing with ease. A firm favourite from Park Tool, this is an essential no-nonsense maintenance tool that every cycling enthusiast needs in their kit. Features:Strong, durable steel handlesPrecision ground cutting jaws for a clean cutBuilt-in crimper for cable end caps and forming hole for reforming housing ends and housing ferrulesWire latch holds handles together when not in useUse: Bicycle cables and housingBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Precision ground cutting jaws for a clean cut every time Cold forged and heat treated steel handles for massive strength Dual density moulded grips for comfort and control Built in crimper for cable end cap Forming hole for reforming housing ends and housing ferrules Quite simply the best cutters money can buy
The RT-2 is specially designed for removing 1-1/4 and 1.5 inch head cupsThe flared end fits through the head tube and snaps behind the cup allowing the cup to be removed with a tap of a hammerDurable heat treated alloy steel with nickel finish for long lifeThe new RT-2 does not replace the RT-1 Head Cup Remover although similar in appearance the two tools are designed to work on different size head cupsAlso suitable for may motorcycle headtubes
Key Features:The MT-40 is a high quality, folding take-along tool.Features forged aluminum side plates.Hardened and plated tools.Smooth ergonomic operation.2.5, 3, 4, 5, 6 and 8mm hex wrenches.T25 & T30 Torx® compatible driver.Combo cross/straight tip screwdriver.CO2 cartridge inflator adapter.Key ring holder.243 grams.
The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deepThe guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameterTwo cutting slots are gived, one for standard saw blades and one for thicker, carbon specific bladesHardened steel body with moulded contact points to priotect tubes and frames.
A pannier rack built to perform and last, packed full of features and attention to detailRobust 10 mm tubular alloy TIG welded constructionNarrow top and wide base design offering the ultimate triangulation stability unmatched by other designsDual rail fitting system allows pannier bags to be fitted lower down for a lower centre of gravity, and additional bags can be mounted on the topMulti-mount fitting system allows the rack to be fitted to a wide variety of frame designsBolt on foot design dramatically increases strength and lifespanAdditional longer foot pack included for a true universal fitBuilt in cargo strap mount on the foot platesMax load carrying capacity 30 kgNo-quibble 5 year warranty.
Replacement freehubs (including sealed bearings), springs and pawls for all 6Drive hubs.
High quality flat pedals,Replaceable pins,Sealed cartridge bearings,Black alloy body,9/16 inch thread.
Top quality cable cutters for inner wires and outer casing, including index gear cablesPrecision ground cutting jaws make for a clean cut every timeCold forged and heat treated steel handles for massive strengthDual density moulded grips are contoured for comfort and controlBuilt in crimper for cable end capsForming hole for reforming cable housing and ferrulesA wire latch holds the handles together for storage
Key Features:Designed and built to install and remove BB30 bearings,The BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings into the bottom bracket shell,The included BB30 bearing remover works from inside the shell to easily push out bearings,Updated to also remove PressFit 30 (PF30), EVO 386, BBright-Ö and PF121,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.