Complete your FSA cockpit with these lightweight alloy headset spacers. Designed to fit 1 1/8 inch fork steerers the spacers come in a wide range of sizes including 3, 5, 10 and 15mm and are finished with the FSA logo on the side. Sold individually.
The Six Pack Mk4 now comes with an even wider beam pattern, it reaches far and wide down the trail whilst also enveloping the wheel to give total perspective. Shredding at high speed or tackling the most technical rock garden, is made even easier with an increased 5250 lumen measured output. REFLEX++ Technology ensures the right lumen output no matter the terrain, speed, or ride, combined with OMS to give runtime flexibility of 2 36 hours. Perfect for Enduro or Endurance.Reflex+ Technology - Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. In reality it is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.Smart Port+ Technology - Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices.OLED Status Display - OSD - An LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.Optimised Mode Selector - Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.Intelligent Thermal Management - Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once the light has cooled, the power is automatically restored.In the box: Six Pack MK12 GMB, QR Handlebar Bracket (31.8mm - 35.0mm), Fast Charger, QS Guide.Specification:LEDs: 6 x White XPL2(W3)IP Rating: IP65Max Lumens: 3750 (Reflex 5250)Battery: 17,000 mAh Li-IonRuntime: 2 - 36 HoursCharging Time: 8 HoursWeight: 386gMaterial: Anodised 6063 AluminiumLength: 118mmHead Diameter: 61mm
The Six Pack Sync from Exposure Lights now has a wider beam pattern combined with the same penetrating throw and an enhanced 5250 of measure lumens obliterates the dark to define the terrain in its path. With Sync the Six Pack can be programmed to the riders personal requirements by connecting the light to the new updated APP to ensure that it meets every desired requirement at the touch on the wireless remote control. REFLEX++ still selectable to have the right lumens of the right terrain automatically.Reflex+ Technology - Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. In reality it is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.Sync - Sync allows you to control the light with a remote switch and to make custom programs in the Exposure SYNC App, additionally both helmet and handlebar lights can be simultaneously controlled with a single remote via Bluetooth connectivity. App is available in both iOS and Android platforms.Smart Port+ Technology - Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices.OLED Status Display - OSD - An LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.Optimised Mode Selector - Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.Intelligent Thermal Management - Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once the light has cooled, the power is automatically restored.In the box: Six Pack SYNC MK4, SYNC Remote, QR Handlebar Bracket (31.8mm - 35.0mm), Fast Charger, QS Guide.Specification:LEDs: 6 x White XPL2(W3)IP Rating: IP65Max Lumens: 3750 (Reflex 5250)Battery: 17,000 mAh Li-IonRuntime: 2-36 HoursCharging Time: 8 HoursWeight: 386gMaterial: Anodised 6063 AluminiumLength: 118mmHead Diameter: 61mm
The 2 Cell Li-Ion Battery Pack from Hope has a built-in fuel gauge and is a replacement or spare for your Hope bike lights.
Keep your Hope wheels and drivetrain up to date with the XX1 driver body. This freehub allows you to fit the Sram XD cassettes to your Pro 2 Evo hubs allowing you to update your drivetrain to an 11/12 speed set up.
Keep your Hope wheels and drivetrain up to date with the XX1 driver body. This freehub allows you to fit the Sram XD cassettes to your Pro 2 Evo hubs allowing you to update your drivetrain to an 11/12 speed set up.
The Burgtec Direct Mount Stem Spacer is a no fuss mod for racers who want to lift the front end of the DH bike. Perfect for steeper tracks the Spacer allows you to adjust the height of your front end by sitting between your stem and crown.Fits BoXXers, Fox 40, DVO, Manitou, Marzocchi any other forks that use IS mountOnly available in 5mm stack heightWeight 15 gramsColour Burgtec BlackIncludes bolts
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Stem Spacer Kit is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Stem Spacer Kit is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Includes 2x5mm, 1x10mm and 1x20mm spacers.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Stem Spacer Kit is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Stem Spacer Kit is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Includes 2x5mm, 1x10mm and 1x20mm spacers.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Stem Spacer Kit is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Stem Spacer Kit is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Includes 2x5mm, 1x10mm and 1x20mm spacers.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Stem Spacer Kit is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Stem Spacer Kit is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Includes 2x5mm, 1x10mm and 1x20mm spacers.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Stem Spacer Kit is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Stem Spacer Kit is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Includes 2x5mm, 1x10mm and 1x20mm spacers.