A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
Park Tool Adjustable Crown Race Puller CRP-2The CRP-2 from Park Tool is a highly-precise workshop tool for the accurate, simple and safe removal of fork crown races. This fully adjustable and easy to use tool allows for accurate adjustment of the individual blades, which are positioned around the edges of the crown race, once set tight, the crown race can be pulled off efficiently without any risk of damaging the fork. This tool is very versatile and fits around most possible interferences caused by fork top caps and crown protrusions.Features: Material: Steel Compatible Steerer Diameter: 1", 1-1/8", 1-1/4", 1.5 forks - Suspension and Rigid Compatible Steerer Tube Length: 14 to 43cm (5.5 to 17 inches)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do itCuts the outer edge and lower surface of the crown race seatA simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubesIncludes high speed steel cutters and adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks and 30.1 mm crown race seat on 1-1/8inch forks
Adaptor for the Park CRC-1 that allows the quick and perfect facing of 1.5' / 39.8 mm standard crown racesDesigned for use on tapered steerer forksGrub screws lock adaptor and cutter in place for easy useIncludes precision ground crown race cutterFor best results use plenty of Park CF-2 cutting fluid
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do itCuts the outer edge and lower surface of the crown race seatA simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubesIncludes high speed steel cutters and adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks and 30.1 mm crown race seat on 1-1/8inch forks
Park Tool Crown Race Setting System (CRS-15.2)Designed for the fitting of bearing races for 1.5" and 1-1/4" forks, the Crown Race Setting System CRS-15.2 allows you to do so in an easy, damage-free manner. Safe and Accurate Race Seating The system utilises two different insert rings and a further aluminium insert to ensure there is no direct contact with your bearing's surface as you lightly hammer the tube's end cap to seat the race firmly and properly in place. Including an extension that will allow you to work on fork steering tubes up to 425mm, the Crown Race Setting System CRS-15.2 will allow you to fit your races safely and accurately. Features: Material: Aluminium SHIS Terminology: CRS-15 services crown races in SHIS 33 and 40. Compatible Bearing Races: 1.5", 1-1/4" Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crown Race Setting System - CRSAs a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features: Precision installation tool specifically designed for setting headset crown races Accurately places the crown race whilst distributing the impact evenly and without damage to the bearing surface Safer, more accurate alignment and easier to use than traditional slide hammersBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.
The Park Tool CRS1 Crown Race Setting System has taken a fresh new approach to crown race installation. Traditionally, a mechanic would slam a tube down onto the bearing surface to set the race in place. The CRS1 offers a different approach that offers faster, safer, and more precise installation. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS1 set includes one universal setting tube, three 1 inserts, and three 1-1/8 inserts.
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
With two different insert rings and an aluminium insert preventing any direct contact with your bearing's surface, the Oversized Crown Race Setting System CRS-15.2 allows you to gently tap the end cap to fix the race firmly and accurately in place. Bundled with an extension for working on fork steering tubes up to 425mm, this is a great bit of kit making sure your races are set correctly.
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers