These Neoprene Nylon Overshoes are the middle member of the dhb overshoe family, providing protection against cold, wet weather. The 3mm neoprene is tough but stretchy, and when on, the fitting is snug and form-fitting. The durable, rear-entry, size 5, lockdown, YKK zip provides access to the shoe cover and makes it easy to slip on and off. Once the foot is in place and the heel adjusted to fit it can be zipped closed and secured with the Velcro top tab. The closed-cell neoprene structure means the material is wind and waterproof. Internally taped seams add strength to the waterproof seal. The underside of the overshoe features a robust Kevlar material, which is abrasion-resistant.
The Urban is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac, Velcro lock-through panel. The cover can be tweaked to suit any seat and handle bar height. The URBAN design also features unique Velcro lock-through panels, so your lock can be pushed through to secure the cover to your bike. This also keeps the cover down low rather than riding above the lock. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack, and the URBAN Stuff Sac also easily attaches to your bike frame. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
The Stash is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac. Each BikeParka has an elasticated bottom for close fit around the wheels and eyelets for ties or small locks. The cover can be tweaked to suit any seat and handle bar height. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
REGO Rapid Recovery Plus contains the highest quality protein concentrate with an added 2g of Leucine and 5g of L-Glutamine. This blend provides a rapid recovery formula which promotes the replenishment of muscle glycogen stores, muscle protein synthesis, gut function and rehydration. Carbohydrate is the main muscle fuel for our body during moderate to high-intensity exercise. During training and competition, our bodies can absorb around 60-90g of carbohydrate per hour, meaning that demand will outstrip the supply of energy. This shortfall is met by using your glycogen stores, which must be replenished post exercise so you are able to perform well in your next session. REGO Rapid Recovery Plus is tested under the Informed Sport Certification program. This approach involves testing every single batch of Science in Sport finished product which leaves the Company's factory, screened against the 2017 World Anti-Doping Agency (WADA) list. Banned substances including steroids are tested to the level of 10 Nanograms per gram, and stimulants to 100 Nanograms per gram. Batches (sampled at the beginning, during and end of each product batch) receive the recognised and respected Informed Sport certificate and Science in Sport provides the documentation to athletes on request. Branched-Chain Amino Acids (BCAA’s) boost muscle growth, decrease muscle soreness, reduce fatigue and prevent muscle wasting. Recommended Usage This product is designed to be consumed within 30 minutes post-exercise and not mixed with milk as it will slow down the absorption rate. Directions for Use Add 50g (approx. 3 full scoops – scoop included) to 500ml of water in a shaker or bottle and mix well, ensuring the lid is firmly closed.
As recently as the late 1980’s, professional road cyclists would wear a pair of socks over their shoes while racing and training. If asked why they did this, they would answer "It’s warmer, more aerodynamic, keeps my shoes cleaner and looks better". Of course, one could argue that putting cotton socks over cycling shoes makes none of those possible. DeFeet crafted a solution that keeps windchill off the feet, creates smoother lines, keeps dirt out, looks better, and ultimately makes riders faster. Slipstream’s™ also last much longer than a pair of socks while barely costing more. Pay homage to the classic era of cycling, wear Slipstreams™ and go faster. PLEASE NOTE - A small hole is required to be cut for your shoe cleat - NOT waterproof, these overshoes are designed to reduce windchill - Low temperature wash only - Not suitable for tumble dryer use - This item comes as a pair
High5 Recovery Drink is the ultimate drink for after exercise and the Pro’s choice. The whey isolate used in Recovery is a high quality source of protein. Protein contributes to muscle growth and maintenance. High5 Recovery Drink also contains carbohydrate. After exercise, your muscles are often low in glycogen (carbohydrate). Consuming carbohydrates contributes to recovery of normal muscle function after strenuous exercise. Branched-Chain Amino Acids (BCAAs) boost muscle growth, decrease muscle soreness, reduce fatigue and prevent muscle wasting. Directions for Use Recovery Drink mixes easily with water or milk. Consume one serving of Protein Recovery in the first hour after hard exercise. You can also take another one or two servings later in the day or just before you got to bed. You can also use milk substitutes such as coconut, soy or rice milk.
The Extreme Weather Neoprene Overshoes are the most protective of dhb's overshoe collection. The 3.5mm-thick neoprene provides the ultimate in insulation against both the cold and wet. Further protection comes via the TPU skin on the external face. This non-porous and flexible skin prevents rain from being absorbed into the surface of the overshoe. The underside of the overshoes feature a robust Kevlar material, extending around the toe and heel to prevent excessive wear when walking in the overshoes. The holes in the base for the cleats are shaped to fit snugly, minimising the amount of road spray entering the shoe from below. A durable, size 5, lockdown, YKK zip at the rear makes it easy to get them on and off.
Simply Slip the front edge of the cleat into the slot at the front of the cover. Pull the rear tab to snap the back of the cover into place over the rear of the cleat. Ensure the cleat cover is securely fitted before walking.
With its excellent, watertight lining, the Transfil MudLovers Cable Set is ideal for both MTB and road use and it's compatible with all mechanical gear systems.
The Dinamo 3D forged stem is made with 7050 T6 aluminium alloy, the variable thickness and the oval section make it extremely light, accurate and reliable in every riding condition.
These neoprene Toe Cover Overshoes are an essential piece of kit for riding when the weather's beginning to turn fresh. The open design means you can apply the cover and remove it easily, boosting climate control on longer rides. The neoprene fabric stretches around the shoe and covers the front end, which is the most exposed area to wind chill. Most cycle shoes have venting to allow hot air out the Toe Cover Overshoe blocks these holes and adds a barrier to keep the feet warm and comfortable. The neoprene is sandwiched between two layers of nylon stretch fabric, this face fabric helps protect the neoprene from scuffs and also makes them easy to put on.