The Urban Luminite Overshoes II are designed to offer waterproof protection over any style of cycling shoes, the open sole and fully opening back, with Velcro® fastening, accommodating road and MTB cleats plus flat pedal shoes. The stretch waterproof PU fabric gives a snug fit and keeps rain and road spray at bay while aramid is used over the toe and heel areas to enhance abrasion resistance and durability. With the extensive use of reflective trims, the movement of your foot during pedalling provides attention-grabbing visibility when it's dark, alerting other road users to your position more effectively than static reflective clothing. The perfect choice for commuting or training during early mornings or after dark in the evenings.
Keeping rain and road spray at bay, the FS260 Pro Slick Overshoes II are waterproof but aren't too bulky making them great for any season and easy to stow away in a pocket if the sun does break through the clouds. Thanks to the open sole design and rear zipper access they're easy to pull on and off, and with the stretch upper they're suitable to slip on over most styles of road cycling shoe. A deep elastic cuff, with an inner silicone gripper, gives the overshoes a close and secure seal against the leg, while twin rear stripes are reflective for extra after-dark visibility.
It may be freezing cold outside but it won't stop you from getting on your bike and riding. But your feet are often the first to feel those freezing temperatures bite. However, the Freezing Point Overshoes II provide the insulation needed to let you get your winter miles in with warm feet. The fleece lining traps the all-important warmth while the neoprene outer sheds water when conditions turn particularly horrible. To the bottom, a tough aramid sole unit with aramid thread provides long-term durability. Side prints also provide protection from crank rubbing. For the shorter days of winter where the darkness comes quickly, the reflective details will keep you seen. And with the offset rear zipper they're also easier to slip on and off before and after your ride.
Getting covered in mud is one of those things that actually makes mountain biking so much fun in autumn and winter. But cold wet feet aren't so much fun. However, pull the MT500 Overshoes on over your mountain bike shoes and enjoy elemental protection. Thanks to their tough nylon faced neoprene construction they keep wet weather out and warmth in. The rear zipper, with zip guard, makes them easier to pull on and off at the start and end of your rides. A moulded toe cap protects the front of your feet and the underside is treaded to offer better purchase on slippery and muddy slopes. The sole is also reinforced, designed to be tough and durable enough over rocks and when on the pedals. There's even added protection across the side to shrug off crank rub. Reflective details are the final flourish, making you easy to spot on your after-dark mountain bike missions.
Perhaps the toughest of conditions to get out and ride your bike are when it's cold and wet. But the Road Overshoes provide outstanding warmth and protection from the elements thanks to their smooth neoprene construction. This has the dual characteristics of being both waterproof and insulating while also providing a smooth aerodynamic fit over your cycling shoes. With their offset zipper, they're easy to pull on and off and aramid thread ensures they're built tough too. And for those dark winter rides, reflective details boost your visibility as the nighttime draws in.
Effetto Mariposa Carogna Tubular Tape Remover (150ml) Making the removal of tub tape or glue less bothersome the Carogna Tubular Tape Remover uses a new breed of chemical that is neither smelly or dangerous. Easily spread with a brush it effectively dissolves mastic for easy removal using just a cloth. Features:Remover will dissolve the mastic, making it easy to remove with a clothCarogna Remover, thanks to its high viscosity, can be spread on the rim gluing surface with a brushNot smelly nor dangerous, the remover uses a new breed of chemicalsBuy Effetto Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
Carogna Remover is a modern solvent that will soften & gelify dried-out mastic or glues from tubular rims. Then its easier to remove this debris making for the optimal (clean) surface for installation of new Effetto tub tape.
Those of you who have seen the dried remains of tubeless sealant in a tyre will know it can be a real pain to remove all remnants. This is where Effetto Mariposa's Caffelatex Remover comes in. Caffelatex Remover is designed to soften or dissolve dried out natural or synthetic latex stains from frames and clothes.Helps to remove tubeless sealant stains from frames and clothesStrong enough to dissolve dried sealant in blocked tubeless valves50ml bottle will be enough to remove plenty of sealant residueContains no dangerous or flammable chemicalsSuitable for use on metals, painted solid surfaces and fabrics, Caffelatex Remover is formulated from non-dangerous or flammable chemicals to remove stubbornly dried on tubeless sealant. By applying a droplet of remover to the affecting area and waiting 10-20 seconds, you can then rinse with water and the sealant will be removed. While not being too strong that it damages surface finishes, the remover is strong enough to help unblock tubeless valves that have become clogged with sealant. Simply put, if you need help removing tubeless sealant from your bike or kit, you need Effetto Mariposa's Caffelatex Remover.
The Overguard is a universal hub guard. Designed to fit the majority of hubs, pegs and frames/forks on the market. This injection molded Nylon/Fibreglass version is the perfect balance between price and durability.
BMX Handlebars from Eclat. The Dive bars are made from full liquid post heat-treated seamless 4130 crmo. They are available in two rises; a 8.6 and a larger 8.9 both with a flatter 10 backsweep. ###section### Product Specs Rise: Multiple Options Width: 29.5" Up Sweep: 2 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 771g / 1.7lbs ###section### ###shogun-image-section###
Eclat have oversized their popular Cortex hub, throwing in larger bearings usually found in their rear hubs to give the hub a smoother ride with less resistance. Using the same design as it's predecessor the Cortex OS is built for riders who want unrivalled durability and performance. The larger bearings are designed to keep on rolling smooth even after years of heavy abuse, capable of taking much harder impacts too they're built to go hard. The Cortex OS features a longer 35mm bolt to accomodate plastic pegs and to give a stronger female bolt setup. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36h BEARINGS: Sealed oversized 32mm bearings WEIGHT: 386g (13.6oz)
The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars and stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) and will not be compatible with a traditional 22.2mm stem. Rise: 9.1" ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Bar Type: 4pc Weight: 1130g / 2.49lbs ###section### ###shogun-image-section###