◌Nukeproof Horizon Over Stem Garmin MountThe Horizon Over Stem Garmin Mount from Nukeproof offers a stem-mount computer mounting system. It enables you to install your Garmin and Wahoo Element computers securely and conveniently to your bike's cockpit.Mount Garmin and Wahoo Element Ahead of Your Bike CockpitThe Nukeproof Over Stem mount has been fully designed in house to install your Garmin and Wahoo Element computers to your bike. Designed specifically around our Horizon stem to ensure a clean and snug fit, the mount will also fit most other stem models as well. This will suit riders wishing to place their computer ahead of the steerer tube for more visibility but not in front of the bars where the computer can be vulnerable to impacts while Enduro or Downhill riding. To install the mount to your bike, you will need 7mm of excess steerer tube above your stem and is a very easy to install. Instructions: Remove current top cap and bolt Ensure you have at least 7mm of excess steerer Place Over Stem mount to steerer tube Fit any additional headset spacers if required Install polymer ¼ turn insert in orientation to suit Garmin or Wahoo Reinstall top cap and boltFeatures: Material: AL6061 Fully CNC machined to reduce weight without compromising strength Robust adonised finish with laser etched Nukeproof logo Easy to install Better visibility of computer without compromising protection 1 1/8 steerer compatibilityBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Nukeproof Horizon Over Stem Garmin MountThe Horizon Over Stem Garmin Mount from Nukeproof offers a stem-mount computer mounting system. It enables you to install your Garmin and Wahoo Element computers securely and conveniently to your bike's cockpit.Mount Garmin and Wahoo Element Ahead of Your Bike CockpitThe Nukeproof Over Stem mount has been fully designed in house to install your Garmin and Wahoo Element computers to your bike. Designed specifically around our Horizon stem to ensure a clean and snug fit, the mount will also fit most other stem models as well. This will suit riders wishing to place their computer ahead of the steerer tube for more visibility but not in front of the bars where the computer can be vulnerable to impacts while Enduro or Downhill riding. To install the mount to your bike, you will need 7mm of excess steerer tube above your stem and is a very easy to install. Instructions: Remove current top cap and bolt Ensure you have at least 7mm of excess steerer Place Over Stem mount to steerer tube Fit any additional headset spacers if required Install polymer ¼ turn insert in orientation to suit Garmin or Wahoo Reinstall top cap and boltFeatures: Material: AL6061 Fully CNC machined to reduce weight without compromising strength Robust adonised finish with laser etched Nukeproof logo Easy to install Better visibility of computer without compromising protection 1 1/8 steerer compatibilityBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Removes cassette lock-rings of Bosch mid-motor sprockets,Kraton handle provides a firm grip,Extra-long, for increased leverage.
With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-Tip If water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions 1: Put on your socks 2: Pull the shoe cover/overshoes on over your socks first 3: Ensure closure at bottom of the shoe cover is open 4: Put on your cycling shoes 5: Stretch the cover over your shoes and close snap underneath 6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad. Care Instructions Hand wash with cold water, air dry. Do not bleach. Do not iron. Store out of direct sunlight.
VeloToze Silicone Shoe CoversKeeping your feet warm and dry when cycling through cold, wet and wild weather, the sleek design of the VeloToze Silicone Shoe Covers does away with zippers to create an incredibly aero fit, while poppers below make it easier to get them on.With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-TipIf water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions1: Put on your socks2: Pull the shoe cover/overshoes on over your socks first3: Ensure closure at bottom of the shoe cover is open4: Put on your cycling shoes5: Stretch the cover over your shoes and close snap underneath6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad.Care InstructionsHand wash with cold water, air dry.Do not bleach. Do not iron.Store out of direct sunlight.FeaturesMaterials: 100% Silicone rubberWaterproof: silicone keeps your feet warm and dryWindproof: windproof materials keep your feet warm on a cold morning or winter ridesEasy to put on: snaps on below cycling shoeFlexible: silicone stretches and flexes with you as you rideDesigned for -5 C in dry, sunny weather to 15 C in wet, rainy weatherSold as a pairBuy VeloToze from Chain Reaction Cycles, the World's Largest Online Bike Store.
VeloToze Silicone Shoe CoversKeeping your feet warm and dry when cycling through cold, wet and wild weather, the sleek design of the VeloToze Silicone Shoe Covers does away with zippers to create an incredibly aero fit, while poppers below make it easier to get them on.With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-TipIf water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions1: Put on your socks2: Pull the shoe cover/overshoes on over your socks first3: Ensure closure at bottom of the shoe cover is open4: Put on your cycling shoes5: Stretch the cover over your shoes and close snap underneath6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad.Care InstructionsHand wash with cold water, air dry.Do not bleach. Do not iron.Store out of direct sunlight.FeaturesMaterials: 100% Silicone rubberWaterproof: silicone keeps your feet warm and dryWindproof: windproof materials keep your feet warm on a cold morning or winter ridesEasy to put on: snaps on below cycling shoeFlexible: silicone stretches and flexes with you as you rideDesigned for -5 C in dry, sunny weather to 15 C in wet, rainy weatherSold as a pairBuy VeloToze from Chain Reaction Cycles, the World's Largest Online Bike Store.
VeloToze Silicone Shoe CoversKeeping your feet warm and dry when cycling through cold, wet and wild weather, the sleek design of the VeloToze Silicone Shoe Covers does away with zippers to create an incredibly aero fit, while poppers below make it easier to get them on.With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-TipIf water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions1: Put on your socks2: Pull the shoe cover/overshoes on over your socks first3: Ensure closure at bottom of the shoe cover is open4: Put on your cycling shoes5: Stretch the cover over your shoes and close snap underneath6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad.Care InstructionsHand wash with cold water, air dry.Do not bleach. Do not iron.Store out of direct sunlight.FeaturesMaterials: 100% Silicone rubberWaterproof: silicone keeps your feet warm and dryWindproof: windproof materials keep your feet warm on a cold morning or winter ridesEasy to put on: snaps on below cycling shoeFlexible: silicone stretches and flexes with you as you rideDesigned for -5 C in dry, sunny weather to 15 C in wet, rainy weatherSold as a pairBuy VeloToze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tailor made backpack rain covers of PU-coated and seam taped nylon for all packs. The Rain Covers feature a perimeter shock cord and stopper that allows perfect flap-free fit. Comes with integrated stuffsack and sizes S and M feature a bike light holder. Small fits up to 25 litres Medium fits up to 40 litres Large up to 60 litres.
Designed to fit a range of EVOC bags, the EVOC Raincover Sleeve provides additional protection from the elements, helping keep the contents of you bag safe and dry. With taped seams the Raincover is fully waterproof and shrugs off day to day abuse with ease; like all EVOC products, this is built to last! The Raincover Sleeve also helps to provide better visibility thanks to it's reflective logo print and attachment point for a rear light, so you'll be more visible to other road users too. The Raincover has an elastic draw-cord for sizes adjustment and even packs away with itself, so you can keep it tucked away in your bag for when you need it!
With reflective logo print and a back light attachment, the Large Raincover Sleeve provides full protection when heading out into unpredictable conditions with an elastic drawcord perfectly fitting round your pack.
Lightweight protection for toes Sometimes you just want a bit of extra protection but full winter overshoe is just too much for the conditions. Toe covers bridge that gap between Autumn and Winter, Winter and Spring. They'll insulate your toes nicely on chilly days without the bulk of a full overshoe. On deep winter days, wear the toe covers under overshoes, for added luxury toe insulation.
GripGrab Helmet CoverDesigned for maximum visability thanks to its reflective styling and design, the Helmet Cover from GripGrab is waterproof, windproof and features the perfect fit. Its practical full head coverage is ideal whether you’re training, relaxing or commuting.Features:Wind- and waterproof materialsTaped seamsReflectors for safetyHigh visibilityOne sizeBuy GripGrab from Chain Reaction Cycles, the World's Largest Online Bike Store.