Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Non Drive Side Spoke Length Driveside Spoke Length 27.5" 271 268 29" 289 286 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Nukeproof Horizon CL Ti Pedals have been extensively engineered to exact standards and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance, low weight, and now feature an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's designed to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Key Features:Cold forged T1- 6061 alloy body with CNC finishing.Tough and lightweight Titanium axle.Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair).Low profile contoured chassis with optimised leading edge.Side Support Platform.Dual Engagement Mechanism.SPD compatible.Weight: 430g.
The Nukeproof Horizon CS CroMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Key Features:Cold forged T1- 6061 alloy body with CNC finishing,Tough and lightweight CrMo axle,Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair),Low profile contoured chassis with optimised leading edge,Side Support Platform,Dual Engagement Mechanism,SPD compatible,Weight: 352g.
Nukeproof Horizon CL Ti Downhill Flat MTB PedalsThe Nukeproof Horizon CL Ti DH Pedals take inspiration from the hugely popular Horizon Pro flat pedal and feature a titanium axle for the ultimate in low weight and strength. Extensively engineered to offer the optimum balance of impact strength and fatigue resistance, the Horizon CL's have an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting kit that's designed to get you on the podium.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Should you happen to prefer longer cleat bolts or simply to fine-tune your riding experience, you can find the Long Nukeproof Cleat Bolts HERE This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Cold forged T1- 6061 alloy body with CNC finishing Tough and lightweight Titanium axle Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Low profile contoured chassis with optimised leading edge Side Support Platform Dual Engagement Mechanism SPD compatible Weight: 462gClipless Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Extensively engineered to offer the optimum balance of impact strength and fatigue resistance, the Horizon CL's have an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting kit that's designed to get you on the podium. All New SPD Cleat System The SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately. Click here for a Step by Step Installation Guide
These flat pedals are engineered for aggressive trail-riding as they deliver an amazing strength to weight ratio. They feature a hard-wearing aluminium platform construction, which makes them ideal at withstanding all the intensity that comes with shredding the mountain bike trails. Nukeproof has also put these through a forging and CNC-machining process, which shaves off any unnecessary weight while also allowing them to maintain their rock-solid durability. Sam Hill MTB PedalsDeveloped by mountain bike legend Sam Hill and long-time mechanic Jacy Schumilak, these MTB pedals are designed for maximum off-road performance. Using all the proven internal parts of the Horizon Pro pedals, these signature enduro pedals spin on high-quality DU bushings with two sealed cartridge bearings. In addition, the Nukeproof Horizon Ti Sam Hill Enduro Race Pedals are also equipped with titanium axles, so you'll enjoy their incredible robustness without any excess weight. Key Features: Body Material: Forged and CNC-machined 6061-T6 Aluminium,Axle Material: Titanium,Use: MTB, Enduro,Axle: 9/16",Bushings: 2x DU bushings,Bearings: 4x sealed Z989 cartridge bearings (per pair),Spare Pins Included: No,Part Number: 102270558SH03PEDFLTIBLK,Weight: 337g (approx).
The quickest and most convenient cycle roof carrier on the marketKey Features:Revised clamp with extended lower jaw holds your bike in place whilst you secure the wheel straps and tighten everything up,Integrated torque limited dial prevents over tightening on lightweight carbon frames whilst ensuring that clamp is still secure,Deep and flexible padding integrated into the 598's jaws adapts to the shape of your frame giving a more secure hold whilst minimising the chances of damage,Smartly designed wheel holders with diagonal straps for a larger contact area and more secure hold. Ratcheting pump-buckles make cinching them up a quick and easy task,Clamp arm can be switched tool-free from one side to the other for mounting on either side of your vehicle,Clamp and mountings are lockable, securing the rack to the car and the bike to the rack,Includes T-track adaptors to fit Thule Wing, Slide, and Aero bars, requires adaptor for square bars,Maximum suggested bike weight: 20 KG,City crash tested and TÃ?V-GS approved.
The Red Original Long Sleeve Pro Change Robe EVO offers premium protection from the elements pre and post water adventure. Perfect for extra warmth or as a cover-up when changing, it has been made with a high performance technical fabric with a unique breathable, waterproof outer alongside an adjustable hood and wind baffle to keep you dry and warm. Plus, the moisture-wicking soft liner lends comfort, while the longer length ensures full coverage. Mulitiple pockets including a water-resistant chest pocket, fleece-lined hand warmer pockets, and more, also provide ample space for keeping valuables and essentials safe when you are on the go. Finally, when not in use, the changing robe will pack away small for easy storing, and a subtle reflective logo adds visibility for when you are out adventuring in the early mornings or late evenings.
Nukeproof Horizon V2 Front WheelThis MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKHORV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKHORV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKHORV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKHORV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKHORV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKHORV2END2015NB Convert 20mm non boost hub to 15mm non boost Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g; 29” 15mm Boost: 897g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.