Ragley Piglet Hardtail Frame The Piglet Hardtail Frame from Ragley is optimised for a fast, agile and efficient trail riding experience. It is engineered from 4130 Chromoly (CrMo) steel and is designed with tyre clearance for up to 2.6" tyres and 130 - 140mm suspension fork travel.The Piglet sounds like an underdog. It's shorter travel than the Blue Pig and shares its geometry with the more trail-friendly Marley. But make no mistake, this Piglet is a special breed. The triple-butted 4130 Chromoly tubes supply the compliance for all-day comfort but enough spring to make it a trail sniper's dream on tight and twisty singletrack. Engaging, lively and accurate, the Piglet is a joy on all-day epics, smashing laps around the local woods or carving up the trail centres. The frame features all the modern standards, including ISCG 05 chain guide tabs and boost 148x12 axle spacing. This little piggy will make you go wee wee wee all the way home… Features: 5 Year Warranty and lifetime crash replacement Material: 4130 Chromoly Steel ISCG 05 Tabs ISO 4210 Certified Head Angle: 65.5˚Static Effective Seat Angle: 73˚ Chainstay Length: 425mm Seatpost: 31.6mm Rear Axle: Ragley 12mm x 148mm Thru-Axle Seat Collar: 34.9mm BB Shell: 73mm BSA Headset: ZS44/28.6 | EX44/40 Wheel Size: 27.5” Max Tyre Size: 2.6” BB Drop: -45mm Recommended Fork Travel: 130mm - 140mm Weight: Approximately 2.96kgBuy Ragley Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ragley Piglet Hardtail Frame The Piglet Hardtail Frame from Ragley is optimised for a fast, agile and efficient trail riding experience. It is engineered from 4130 Chromoly (CrMo) steel and is designed with tyre clearance for up to 2.6" tyres and 130 - 140mm suspension fork travel.The Piglet sounds like an underdog. It's shorter travel than the Blue Pig and shares its geometry with the more trail-friendly Marley. But make no mistake, this Piglet is a special breed. The triple-butted 4130 Chromoly tubes supply the compliance for all-day comfort but enough spring to make it a trail sniper's dream on tight and twisty singletrack. Engaging, lively and accurate, the Piglet is a joy on all-day epics, smashing laps around the local woods or carving up the trail centres. The frame features all the modern standards, including ISCG 05 chain guide tabs and boost 148x12 axle spacing. This little piggy will make you go wee wee wee all the way home… Features: 5 Year Warranty and lifetime crash replacement Material: 4130 Chromoly Steel ISCG 05 Tabs ISO 4210 Certified Head Angle: 65.5˚Static Effective Seat Angle: 73˚ Chainstay Length: 425mm Seatpost: 31.6mm Rear Axle: Ragley 12mm x 148mm Thru-Axle Seat Collar: 34.9mm BB Shell: 73mm BSA Headset: ZS44/28.6 | EX44/40 Wheel Size: 27.5” Max Tyre Size: 2.6” BB Drop: -45mm Recommended Fork Travel: 130mm - 140mm Weight: Approximately 2.96kgBuy Ragley Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ragley Piglet Hardtail Frame The Piglet Hardtail Frame from Ragley is optimised for a fast, agile and efficient trail riding experience. It is engineered from 4130 Chromoly (CrMo) steel and is designed with tyre clearance for up to 2.6" tyres and 130 - 140mm suspension fork travel.The Piglet sounds like an underdog. It's shorter travel than the Blue Pig and shares its geometry with the more trail-friendly Marley. But make no mistake, this Piglet is a special breed. The triple-butted 4130 Chromoly tubes supply the compliance for all-day comfort but enough spring to make it a trail sniper's dream on tight and twisty singletrack. Engaging, lively and accurate, the Piglet is a joy on all-day epics, smashing laps around the local woods or carving up the trail centres. The frame features all the modern standards, including ISCG 05 chain guide tabs and boost 148x12 axle spacing. This little piggy will make you go wee wee wee all the way home… Features: 5 Year Warranty and lifetime crash replacement Material: 4130 Chromoly Steel ISCG 05 Tabs ISO 4210 Certified Head Angle: 65.5˚Static Effective Seat Angle: 73˚ Chainstay Length: 425mm Seatpost: 31.6mm Rear Axle: Ragley 12mm x 148mm Thru-Axle Seat Collar: 34.9mm BB Shell: 73mm BSA Headset: ZS44/28.6 | EX44/40 Wheel Size: 27.5” Max Tyre Size: 2.6” BB Drop: -45mm Recommended Fork Travel: 130mm - 140mm Weight: Approximately 2.96kgBuy Ragley Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Mankind Planet 16" Bike comes with a semi sealed Mankind Control Cassette Hub 9t with a 14mm axle, 100% Alloy 3-Piece Cranks 127mm, with 4 Spline - 19mm Spindle, Sealed Euro BB, Mankind Control Alloy Top Load Stem with 40mm reach, Mankind Control Steel Sprocket 25t, Mankind Top and Down Tube Gussets for more frame strength and a smaller padded Mankind Planet Mid Seat/Post Combo with new printed Planet graphics. ###section### Product Specs FRAME MATERIAL: 1020 Hi-Ten Steel Frame WHEEL SIZE: 16" TOP TUBE LENGTH: 16.25" CHAIN STAY LENGTH: 13.25" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: 1020 Hi-Ten Steel - 2-PC Steerer, Tapered Legs, 28mm offset BARS: 1020 Hi-Ten Steel, 8.25” Rise, Back: 12°/ Up: 2°, Width: 28.3” STEM: Mankind Control Top Load Stem - Alloy - 40mm reach HEADSET: Standard 1-1/8” Threadless BRAKE MOUNTS: Welded BRAKES: Alloy U-brake FRONT HUB: Steel - Loose Ball - 3/8” axle FRONT RIM: 6061 Alloy - Single Wall 36H REAR HUB: Mankind Control Cassette Hub – Semi Sealed - 14mm axle - 9t REAR RIM: 6061 Alloy - Single Wall 36H TYRES: Park/Street Tire 16” - LP 60 PSI - 2.1” SPROCKET: Mankind Control Steel 25t CRANKS: Alloy – 4 Spline - 3-Piece - 127mm - 19mm BB: Euro BB sealed - 19mm PEDALS: Plastic Platform SEAT: Mankind Planet Mid Seat/Post Combo GEARING: 25/9 WEIGHT: 8.9kg ###section### Product Highlights Smaller 16" Wheels - The Perfect fit for for 5-8 years olds (3ft - 3ft 6 / 90cm - 105cm) Specifically designed for the smaller rider, just starting out in BMX Strong Hi-ten steel construction Gusseted top and down tubes provide additional strength Semi sealed rear hub ###shogun-image-section###
Limited to 1050 pieces worldwide the bag set from our bikepacking line appears in the unusual color combination of purple-petrol-orange. The set which is only available as a trio comprises a Seat-Pack with 16.5 L a Frame-Pack with 4 L and a Handlebar-Pack with a volume of 9 L. In total the set therefore has a capacity of 29.5 L (1800.2 cu in) and weighs 1145 g (40.4 oz). Yet it is not only the look and capacity that impress – as is customary with ORTLIEB the Bikepacking Set Limited Edition has been produced in Germany and is 100% waterproof long-lasting and robust. Whether you’re riding a gravel road or mountain bike the Bikepacking Set Limited Edition will stand out on any adventure providing you with a stylish companion that makes no compromises in performance. FURTHER DETAILS + An exclusive multifunctional tubular in ORTLIEB design is additionally included in the set COLOR purple MATERIAL PS42R ADAPTER - INSTRUCTIONS Download DATASHEET Download WEIGHT 1145 g | 40.4 oz VOLUME 295 L | 1800.2 cu.inch PROPERTIES mig nopvc ip67
Kink Curb BMX BikeThe Curb BMX Bike is ideal freestyle BMX for riders making their first pedal rotations into the world of street riding and technical skatepark style. Engineered to ensure agile and stable performance while also easy to hop, flick and whip, the Curb is every rider's dream bike to have fun on. A durable Hi-Ten steel frame and fork with modern geometry gives you durability and control to hit any feature with confidence. And its quality component spec from Mission and Kink ensures you have exceptional reliability and style anywhere.The Kink Curb offers the entry-level rider a bike that looks and feels like a pro model without the price tag. Regardless of which colour you choose; you are getting an amazing bike.Versatile, Agile and Stylish Freestyle BMX BikeFeaturing modern geometry and outfitted with components such as 8.75” Kink T875 bars, 3-piece tubular Chromoly cranks, a raised Mission Control TL stem, soft Kink Paragon grips with push-in Kink Thrust bar ends, and 2.4” tyres front and rear; the Curb is perfect for any rider looking for a solid first bike. Features: Frame: Kink Curb 100% Hi-Ten Steel Forks: Kink Lance 100% Hi-Ten Steel Tapered Fork Legs Bars: Kink T875 8.75" 100% Hi-Ten Steel Grips: Kink Paragon, Thrust Barends Stem: Mission Control TL 50mm Headset: Standard 1 1/8" Threadless Brake Lever: Mission Token Brake Cable: Mission L3 Linear Brakes: Mission Cease V2 Cranks: Mission Triumph 3pc Tubular Chromoly 170mm - 8 Spline Bottom Bracket: Unsealed American 19mm Pegs: N/A Pedals: Kink Hemlock Chain: Mission 410 Sprocket: Mission Rank 25T Seat: Mission Warsaw Combo Seatpost: Mission Combo Steel Post Seat Clamp: Mission Slim Clamp Front Hub: Mission Reserve Unsealed 3/8" Axle Rear Hub: Mission Function Semi-Sealed Cassette 14mm Driver: 9T Rims: Mission X7 Tyres: Mission Tracker 2.4" Weight: 12.27 kgPlease note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Note: Manufacturer may reserve the right to change the specification of that listed or shown on this page.Buy Kink Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
The Revolution hub is a freecoaster hub that feels like a cassette hub, weighs the same as a cassette hub, has a pedal gap like a cassette hub and sounds like a cassette hub. Utilizing the Planetary clutch system that functions in a unique and revolutionary way, the BSD Revolution hub eliminates many of the problems associated with the heavyweight traditional cone style clutch design. 30% lighter than conventional freecoaster hubs and no gap when pedalling forward. Eradicates unwanted engagement on rollbacks. No need for oversized hub bearings due to low axial load an has a supertough hollow male 14mm chromo axle. The Revolution is laced to BSD's XLT rim. The XLT is BSD's lightweight rim, designed around an X-section for increased stiffness, the rim has an aero style shape which further triangulates the design. With other proven features such as tapered sidewalls and patented cross over lacing this rim is light while remaining strong. ###section### Product Specs WHEEL SIZE:20' HUB:BSD Revolution AXLE:14mm DRIVE SIDE:Left Side Drive RIM:BSD XLT SPOKES:TBC NIPPLES:TBC WEIGHT:TBC
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)